Canon S 2300N Owner's Manual

Set-Up Sheet

Set-Up Sheet

Thank you for purchasing the Canon imageCLASS 2300.
To get your machine ready for use, please follow the instructions in this sheet before referring to any other documentation.

Unpack the machine and its components.

Check that you have the following:

●

Machine with cabinet stand

●

Stamp cartridge and tweezers

●

Paper size notice cards (2)

●

Toner cartridge (in carton)

●

Paper size labels (2)

●

Power cord

●

Telephone cable

●

Paper size plates (2)

for the Machine

●

Destination labels for one-touch
speed dialing keys (2)

Remove the shipping materials.

1 Remove all the shipping tape and foam blocks

on the outside of the machine.

●

Documentation

●

Set-Up Sheet for the Machine (This Document)

Refer to this document first to install and set up your new machine.

●

Set-Up Sheet for Networking and Printing*

Refer to this document to set up the machine for network and print functions.

●

Basic Guide

This manual explains the basic operations of all functions of the machine. Keep this guide handy for easy reference.

●

Reference Guide

This manual covers machine settings, common operations, maintenance, and troubleshooting.

●

Copying Guide

This manual explains the copy function of the machine.

●

Facsimile Guide

This manual explains the fax function of the machine.

●

Sending Guide*

This manual explains the I-Fax function of the machine.

●

Registration Card

●

Limited Warranty Note

●

CD-ROM*

●

imageCLASS 2300 Driver Software

●

imageCLASS 2300 Network User Software

NOTE

●

An asterisk (*) denotes the item only supplied with the Network Model.

●

Printer and network cables are not included.

IMPORTANT

●

When you transport the machine, you need to screw the metal pin back into the underside of the machine.

Install the stamp cartridge.

2 Remove the clear protective

sheet on the LCD display.

4 Remove the shipping tape

on the right side and
unscrew the metal pin on
the underside of the
machine.

5 Keep the metal pin in the

pin slot on the black panel
behind the front cover.

6 Open the stack bypass and remove

the tape holding the auxiliary tray
and the tray extension.

7 Pull out the left cover and

remove the tape on the inside.

3 Lift the feeder and remove

the lining material on the
platen glass.

1 Pull up the latch to

open the feeder cover.

3 Use the supplied tweezers to align the small stubs on

the side of the stamp cartridge with the indentations
on the stamp receptacle, and push down the stamp
until it snaps into place. Close the inner cover and
the feeder cover.

2 Open the black inner cover.