Canon MG6320 User Manual

<< Previous Next >>

Getting Your Multifunction

Back On Your Network

After A Router Or Network Change

PIXMA MG6320

Windows OS

1

Information

Important

If any of the following situations exist

• You have replaced your Router or Access Point

• You want to use a different wireless network

• Router settings have been changed.

Please complete the following steps to apply the new configuration settings to your multifunction.

<< Previous Next >>

2

Preparing to Connect My Multifunction

<< Previous Next >>

To My Network

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Wireless Connection

Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that

configuration of the computer and access point or router is complete.

3

Preparing to Connect My Multifunction

To My Network

An "Ad-hoc connection," which establishes a direct connection to the computer
over a wireless connection without using an access point, is not supported.

A wireless access point or router is required to use your printer on a wireless

LAN.

Notes on Network Connection

• The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.

• In an office setup, consult your network administrator

• If you connect to a network that is not protected with security measures, there

is a risk of disclosing data such as your personal information to a third party.

• If an error message appears or if you have trouble with the network
connection, refer to the printed manual: Network Setup Troubleshooting.

• Place the machine and computer on the same network segment.

<< Previous Next >>

4

Installing the Drivers & Software

<< Previous Next >>

Software Installation

To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The
installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application
software to be installed.)

IMPORTANT

• Log on as the administrator (or a member of the Administrators group).

• Quit all running applications before installation.

• Do not switch users during the installation process.

• Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.

• It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the

Setup CD-ROM during restarting. The installation resumes once your computer has restarted.

• If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access

the network. If such a warning message appears, set the security software to always allow access.

5