Canon MG6120 User Manual
<< Previous Next >>
Installing Your Multifunction
to Your Network for the First Time
PIXMA MG6120
Mac OS
1
<< Previous Next >>
Preparing to Connect My Multifunction To My Network
3
Connecting Your MG6120 To Your Network
5
Installing The MG6120 Software
12
Installing Your Multifunction
to Your Network for the First Time
PIXMA MG6120
Mac OS
2
Preparing to Connect My Multifunction
<< Previous Next >>
To My Network
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
3
Preparing to Connect My Multifunction
To My Network
An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.
Be sure to prepare an access point.
Notes on Network Connection
• The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
<< Previous Next >>
• In an office setup, consult your network administrator
• If you connect to a network that is not protected with security measures,
there is a risk of disclosing data such as your personal information to a third
party.
• If an error message appears or if you have trouble with the network
connection, refer to the printed manual: Network Setup Troubleshooting.
• Place the machine and computer on the same network segment.
4
Connecting Your MG6120 To Your Network
<< Previous Next >>
Step 1
Use the ↑ or ↓ button (A) to display
Setup, then touch the right
FUNCTION button (B).
Step 2
Use the ← or → button (C) to select
Wireless LAN setup, then touch the
OK button.
5
Connecting Your MG6120 To Your Network
<< Previous Next >>
Step 3
Select Yes, then touch the OK button.
When wireless connection is
enabled, the Wi-Fi lamp lights blue.
Step 4
Select Easy setup, then touch the OK
button.
6
Loading...