Canon MG5620 User Manual

Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MG5620
Mac OS
1
Preparing to Connect to the Network
Network Requirements
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
2
Preparing to Connect to the Network
Notes on Network Connection
The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.
In an office setup, consult your network administrator
If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
Place the machine and computer on the same network segment.
3
Setting up the Network Connection
Software Installation
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. Installation time varies depending on the computer environment or the number of application software to be installed.
IMPORTANT
Log on as the administrator (or a member of the Administrators group).
Quit all running applications before installation.
Do not switch users during the installation process.
Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.
4
Loading...
+ 8 hidden pages