Canon IX 4000 User Manual
1
Installation Manual on
Continuous ink supply system (CISS)
For printer Canon IX 4000/ IP 4200
Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the
best device for an inkjet printer, and it will definitely decrease your printing costs.
Before using this system, please read this manual carefully. The pictures in this manual
may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for
the external ink tank, these pictures are just for reference, please handle according the
real products.
I. Instruction
1. Accessories
1) Continuous ink supply system ……………………………………………….1
2) Air Filter………………………………………………………………………1
3) Sponge………………………………………………………………………...1
4) Injector ……………………………………………………………………….1
5) Long needle…………………………………………………………………...1
6) Short needle …………………………………………………………………..1
7) Protection clamp………………………………………………………………1
8) Installation Manual …………………………………………………………..1
9) Certificate on free installation………………………………………………..1
Pic. 1-1 Pic. 1-2
2. Inspection before installation
Check whether CISS is pulling out, if tube is disconnected.
Please contact local distributor if have found problems.
II. Test printer
INSTALLATION MANUAL ON CISS FOR PRINTER CANON IX 4000/IP 4200
2
1. Check whether printer conditions are normal.
2. Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is
normal (2-2, 2-3).
Pic. 2-1 Pic. 2-2 Pic. 2-3
3. If printer is alright, please print a picture to see the result.
Ill. Installation Procedures
1. Prepare the system
Put this system on the right side of the printer, tidy up ink flow tubes (3-1-1),
pull out all air plug and replace them with air filter with bigger side downward (keep
air plug for the next use) (3-1-2). Move tube valve to close position (3-1-3), if you do
not close this valve, ink maybe flow back, leak, or mis-color.
Pic. 3-1-1 Pic. 3-1-2 Pic. 3-1-3
2. Install chips
Please install the 8BK,8C,8M,8Y chips according the following: use the knife to
cut the mold tip off on the original cartridges, take the original chips out carefully, and
install them on the system cartridge, use molding tool to fix the chips. Please install
5BK chips as following: take the original 5BK chips off, cut the molding tip off system
5BK chips , add double-sticker on 5BK.
3. Install the CISS cartridges
Turn the printer on, open it’s cover, cartridge holder will move to the "cartridge
change" position, plug the power source off (3-3-1), take the original cartridge off.
INSTALLATION MANUAL ON CISS FOR PRINTER CANON IX 4000/IP 4200
3
Take cartridge red color according to the arrow head (3-3-2). Install the cartridges
according to the color order; press back the cartridge cover (3-3-3).
Pic. 3-3-1 Pic. 3-3-2 Pic. 3-3-3
4. Fix iron rack
Take the sponge sticker cover off, stick it on the printer body according to the
indicated space , do not twist the tube .
5. Inspect the tube length
Move cartridge holder to the left side (3-5-1), then right side (3-5-2) and check
whether ink tube is too long or too short. Move cartridge holder to the cartridgechanging place and check whether Ink tube will fall on the paper board. Generally, we
have adjusted ink tube to the right size before shipment (lf it is too long or too short,
please double check before printing (3-5-3)).
Pic. 3-5-1 Pic. 3-5-2 Pic. 3-5-3
6. Adjust the ink tube length
If step 4 is ok, then there is no need to go through this step.
If the tube length is too short then lengthen it (3-6-1, 3-6-2), if too long then
shorten (3-6-3). If the tube falls down, you need adjust the angle of sticker to prevent
falling.
INSTALLATION MANUAL ON CISS FOR PRINTER CANON IX 4000/IP 4200
Loading...