Home Screen / Main Menu
Smartphone Camera
Photo Gallery
Print Photos
Edit Photos
Using Tile Print
Using Collage Print
Share Photos
Save Edited Photos
Send to Mini Print
2
SAFETY INFORMATION
READ BEFORE USE
Please read the following instructions and safety precautions before using the device.
For regulatory and additional safety information, refer to the Regulation and Warranty
Information sheet included in your package contents.
RMN : PP2001
Regulatory Model Identication Number is assigned for regulatory identication
purpose
WARNING
• Keep away from children and infants. Improper use of this product
may cause suffocation or accident.
• Stop using the device immediately if it emits smloke or a strange smell,
or otherwise behaves abnormally.
• Do not look through the viewnder or lens at the sun or others strong
light. Blindness or vision problems could result.
• Do not fire the flash near the eyes. It may hurt the eyes.
• A strap wound around a child’s neck may result in asphyxiation. If your
product uses a power cord, mistakenly winding the cord around a child’s
neck may result in asphyxiation.
• Turn the device o in places where camera use is prohibited. The
electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the product in places where use of electronic devices
is restricted, such as inside airplanes and medical facilities.
3
CAUTION
• When operating in extreme weather, the printer might not print. Let the
printer temperature adjust to recommended operating temperature of
59º to 90ºF (15º to 32ºC), before attempting to print again.
• When charging, please charge the printer at the recommended
temperature of 59º to 90ºF (15º to 32ºC).
• Use a soft dry cloth to clean the device. Do not clean with a damp cloth or
volatile liquids such as paint thinner.
• Keep the top cover closed to avoid dust and other particles from entering
the inside of the device.
• If the device is not functioning properly, please contact the dealer you
purchased this product from or Canon Service & Support at
www.usa.canon.com/support
Never expose the battery to high temperature, direct heat, or dispose by
•
incineration.
• Electromagnetic inter ference or electrostatic discharge may cause the
device to malfunction or the memory to be lost or altered. Should this
occur, use the tip similar sharp object to press the [RESET ] button at the
bottom of the device.
4
OVERVIEW
SUPPLIED ITEMS
Mini Print
Instant Camera Printer
Quick Start Guide
Regulation and
Warranty
Information sheet
USB Cable
PRODUCT FEATURES
CANON ZINK
Photo Paper
(10 sheets)
™
Wrist Strap
Camera Lens Viewfinder
Selfie Mirror Speaker
Fill Light (8 LEDs) Printer Cover
Print Out Slot Aspect Ratio Button
Strap Hole Reprint Button
Flash Mirco USB Port
Status LED Charging Status LED
Slide switch (Off / Auto / Fill Light)
MircoSD Card Slot (up to 256GB)
Power Button Reset Button
Shutter Button
5
SETUP
CHARGE
The device uses a built-in rechargable battery. Please fully charge the device via the
USB cable before using.
− Operating time may vary depending on the battery status, operational status
and environment conditions.
Plug in the USB cable into the device and a chargeable USB adapter.
The charging LED light will turn red to indicate charging.
Once fully charged, the charging LED will turn green.
Battery Status LED indicator
There is a 2 colou (red and green) LED indicator built in the device to show the battery
and charging status.
Status LED Indicator
Charging (RED)
Full (GREEN)
NOTE
About USB Cable
HANDLE THE USB CABLE WITH CARE WHILE CHARGING
• Do not place any heavy objects on top of the cable.
• Do not place the USB cable near heat.
• Do not scratch, damage, twist or pull hard on the cable.
• Do not plug or unplug the cable with wet hands.
• Avoid too high/too low temperature or humid condition.
• Please unplug the USB cable from power source after charging.
• Please use supplied USB cable for charging.
6
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.