Canon GP405, GP605, GP160, Gp-335, Gp-605v Service Bulletin acc-160
...
Service Bulletin
Issued by Canon Europa N.V.
COPIER
Model :
Location :
Subject :
Reason :
Details :
Multi-Output Tray-D1
FEEDER ASSEMBLY
EXTRACTION OF F EEDER ASSEMB LY CONNECTOR (J357/J356)
To communicate cautions to exercise during servicing since there are cases where the connector
(J357/J356) which connec t s the feeder assembly multitray inlet sensor (PS20) and delivery sensor 2
(PS21) gets extracted during servicing.
<Symptom>
There are ca ses where the connect or (J357/J356) which co nne cts the feeder assembly multitray inlet
sensor (PS20) and delivery sensor 2 (PS21) gets extracted if the cable of the connector is pressed
down with the fingers when the feeder assembly is handled during servicing. (Fig. 1)
If the cable is pressed
down in the directions
indicated by the arrows,
the connector may
become extracted.
Connector (J357)
Cable
No.:
DATE:
Multitray inlet sensor (PS20)
Acc-160
(FF-T01-W-000068-01)
09.07.99
Connector (J356)
Cable
Fig. 1
<Factory measures>
The connector (J357/J356) for the multitray inlet sensor (PS20) and delive ry sensor 2 (PS21)
was changed to another type for more tight fit in order to prevent easy ex tractio n of the connector.
View from the top for the feeder assembly
Deliver y senso r 2 (PS21)
-
1 / 2 -
Acc-160
Servicing :
When the feeder assembly is handled during servicing, do not press down on the cable of the connector
(J357/J356) which connec t s the multitray inle t sensor (PS20) and delivery senso r 2 (PS21).
Also, the way of holding the multitray 3/D1 when removing it from the packing box as shown in Fig. 2
is recommended.
Fig. 2 Way of holding the multitray 3/D1 w hen removing it
from the packing box
Service Parts :
No. Description Part number Q’ty
Affected machines:
ZSG01671 and later
Inter-
change-
ability
1 Old PHOTO-INTERRUPTER FH7-7394-000 30 Q30A-38
No Yes
New PHOTO-INTERRUPTER FH7-7312-000 03
P.C.
-- -- -- -- -- -- -- -- -
-
2 / 2 -
Loading...