Canon GP405, GP605, GP160, Gp-335, Gp-605v Service Bulletin acc-145

Service Bulletin

Issued by Canon Europa N.V.

COPIER

Model :

Location :

Subject :

Reason :

Details :

Saddle Finisher-C2

SERVICE MANUAL (FY8- 13F6-000)

ADDITIONAL DESCRIPTIONS

This bulletin pr ovides a new way of removing the saddle uni t.

New Way of Removing the Saddle Unit

2. "Rem oving the Saddle Unit" under B. "Saddle Stitcher Assembly" on p. 4-22
The new way of removal is effective if a newly designed lattice gui de (FG5-8170- 040/FB3-7338-040)
is installed; if an old type of lattice guide is installed, follow the instructions on p. 4-22 of the current
Servic e Manual (FY8-13F6-000).

1) Remove the four screws [1], and detach the
PCB cover [2].

No.:

DATE:

Acc-145
(FF-T01-W-000041-01)

09.04.99

[2]

2) Remove the screw, and detach the bending
roller knob [3].

[1]

[1]

Figure 1

[3]

Figure 2

-

1 / 4 -

3) Remove the four screws [5], and detach the
rear lower cover [4].

4) Disconnect the two connectors [6] used to
connect to the finisher assembly.

Acc-145

[4]

[5]

[5]

Figure 3

5) Remove the five screws [8], and detach the
front inside cover [7].

[8]

[6]

Figure 4

[7]

Figure 5

[7]

Figure 6

[8]

-

2 / 4 -