Canon DR-X10C User Manual
Please read this manual before using the scanner.
After you finish reading this manual, keep it in a safe place
for future reference.
Reference Guide
READ CAREFULLY BEFORE OPENING THE
SEALED DISK PACKAGE
CANON SOFTWARE LICENSE AGREEMENT
IMPORTANT-READ THIS AGREEMENT BEFORE
OPENING THE SEALED DISK PACKAGE! BY
OPENING THE SEALED DISK PACKAGE, YOU ARE
DEEMED TO AGREE TO BE BOUND BY THIS
AGREEMENT.
This legal document is a license agreement between you and
Canon Electronics Inc. (“Canon”). BY OPENING THE
SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE
TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF
YOU DO NOT AGREE TO THE TERMS OF THIS
AGREEMENT, DO NOT OPEN THE SEALED DISK
PACKAGE AND PROMPTLY RETURN THE CANON
SCANNER, THE DISK PACKAGE CONTAINING SCANNER
DRIVER SOFTWARE PROGRAMS AND/OR SCANNER
UTILITY SOFTWARE PROGRAM PROPRIETARY TO
CANON OR ITS LICENSOR (THE “SOFTWARE”) AND THE
ACCOMPANYING DOCUMENTATION AND OTHER
ITEMS TO THE PLACE WHERE YOU OBTAINED THEM
FOR A REFUND BEFORE THEY ARE USED OR OPENED
OR UNPACKED.
In consideration of the right to use the SOFTWARE, you agree
to abide by the terms and conditions of this Agreement.
1. GRANT OF LICENSE: Canon grants you the personal, nonexclusive right to use the SOFTWARE only on a single
computer. You shall need to obtain multiple licenses separately
from Canon when you shall install the SOFTWARE on multiple
computers.
You shall not assign, sublicense, sell, rent, lease, loan, convey or
transfer to any third party, or send or bring the SOFTWARE out
of the country where you originally obtain it to other countries
without required authorization of applicable governments, or
copy, duplicate, translate or convert to another programming
language the SOFTWARE or accompanying documentation,
except as expressly provided herein.
Except as expressly permitted under the applicable law, you shall
not alter, modify, disassemble, decompile or otherwise reverse
engineer the SOFTWARE or accompanying documentation and
you also shall not have any third party do so.
2. BACK-UP COPY: You may make one copy of the
SOFTWARE solely for a back-up purpose or copy the
SOFTWARE onto the permanent storage device (e.g. a hard
disk) of your computer and retain the original for a back-up
purpose. Except as expressly permitted under the applicable law,
any other copying of the SOFTWARE is a violation of this
Agreement. You must reproduce and include the copyright
notice on the back-up copy.
3. SUPPORT AND UPDATE: Canon, Canon’s affiliate, their
distributor or dealer is not responsible for maintaining or helping
you to use the SOFTWARE. No updates, fixes or support will be
made available for the SOFTWARE.
4. LIMITED WARRANTY AND DISCLAIMER OF
INDEMNITY: Canon, Canon’s affiliate, their distributor or
dealer will not guarantee uninterrupted service, or absence or
correction of errors. Therefore, the SOFTWARE is licensed on
an “AS IS” basis without warranty of any kind. The diskette on
which the SOFTWARE is recorded is warranted against
defective material or workmanship under normal use for a period
of ninety (90) days from the date you purchased the same as
evidenced by a receipt or otherwise. The limited warranty does
not apply if the failure of the diskette resulted from accident,
abuse or misapplication of the SOFTWARE and shall not extend
to anyone other than the original user of the SOFTWARE.
CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR OR
DEALER DISCLAIMS ALL IMPLIED WARRANTIES,
INCLUDING ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, WITH
RESPECT TO THE SOFTWARE OR ACCOMPANYING
DOCUMENTATION.
i
NEITHER CANON, CANON’S AFFILIATE, THEIR
DISTRIBUTOR NOR DEALER IS LIABLE FOR ANY LOSS
OR DAMAGE INCLUDING CONSEQUENTIAL OR
INCIDENTAL LOSS OR DAMAGE SUCH AS LOSS OF
PROFITS, EXPENSE OR INCONVENIENCE,
WHATSOEVER CAUSED BY OR ARISING OUT OF THE
SOFTWARE, ACCOMPANYING DOCUMENTATION OR
THE USE THEREOF.
CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR OR
DEALER SHALL HAVE NO OBLIGATION TO INDEMNIFY
YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A
THIRD PARTY ALLEGING THAT THE SOFTWARE,
ACCOMPANYING DOCUMENTATION OR THE USE
THEREOF INFRINGES ANY INTELLECTUAL PROPERTY
OF SUCH THIRD PARTY.
THE ABOVE IS CANON’S ENTIRE LIABILITY AND YOUR
EXCLUSIVE REMEDY IN CONNECTION WITH THE
SOFTWARE AND ACCOMPANYING DOCUMENTATION.
5. TERM: This Agreement is effective upon opening the sealed
disk package and remains in effect until terminated. You may
terminate this Agreement by destroying the SOFTWARE and
any copy thereof. This Agreement will also terminate if you fail
to comply with any of the terms of this Agreement. In addition to
Canon enforcing its respective legal rights, you must then
promptly destroy the SOFTWARE and any copy thereof.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The SOFTWARE is provided with RESTRICTED RIGHTS.
Use, duplication or disclosure is subject to restrictions as set
forth in either subparagraph (c) (1) (ii) of the Rights in Technical
Data and Computer Software clause at DFARs 252.227-7013 or
subparagraph (c) (1) and (2) of the Commercial Computer
Software Restricted Rights Clause at FAR 52.227-19, as
applicable.
7. SEVERABILITY: In the event that provision of this
Agreement is declared or found to be illegal by any court or
tribunal of competent jurisdiction, such provision shall be null
and void with respect to the jurisdiction of that court or tribunal
and all the remaining provisions of this Agreement shall remain
in full force and effect.
8. ACKNOWLEDGEMENT: BY OPENING THE SEALED
DISK PACKAGE, YOU ACKNOWLEDGE THAT YOU HAVE
READ THIS AGREEMENT, UNDERSTOOD IT, AND
AGREE TO BE BOUND BY ITS TERMS AND
CONDITIONS. YOU ALSO AGREE THAT THIS
AGREEMENT IS THE COMPLETE AND EXCLUSIVE
STATEMENT OF AGREEMENT BETWEEN YOU AND
CANON CONCERNING THE SUBJECT MATTER HEREOF
AND SUPERSEDES ALL PROPOSALS OR PRIOR
AGREEMENTS, VERBAL OR WRITTEN, AND ANY
OTHER COMMUNICATIONS BETWEEN YOU AND
CANON RELATING TO THE SUBJECT MATTER HEREOF.
NO AMENDMENT TO THIS AGREEMENT SHALL BE
EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED
REPRESENTATIVE OF CANON.
Should you have any questions concerning this Agreement, or if
you desire to contact Canon for any reason, please write to
Canon’s local affiliate.
ii
FCC REGULATIONS (For 120 V model)
Document Scanner, Model M11063
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician
for help.
Use of shielded cable is required to comply with class B limits
in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment
unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop
operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success NY 11042, U.S.A.
Tel. No. (516)328-5000
RADIO INTERFERENCE REGULATIONS (For 120 V
models)
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
Interference-causing equipment standard entitled “Digital
Apparatus”, ICES-003 of the Industry Canada.
RÈGLEMENT SUR LE BROUILLAGE
RADIOÉLECTRIQUE (For 120 V models)
Cet appareil numérique respecte les limites de bruits
radioélectriques applicables aux appareils numériques de
Classe B prescrites dans la norme sur le matériel brouilleur:
“Appareils Numériques”, NMB-003 édictée par l’Industrie
Canada.
®
International ENERGY STAR
Office Equipment
Program
®
As an ENERGY STAR
Electronics Inc. has determined that this
machine meets the ENERGY STAR
Partner, Canon
®
Program guidelines for energy efficiency.
®
The International ENERGY STAR
Office
Equipment Program is an international program that promotes
energy saving through the use of computers and other office
equipment. The program backs the development and
dissemination of products with functions that effectively
reduce energy consumption. It is an open system in which
business proprietors can participate voluntarily. The targeted
products are office equipment, such as computers, monitors,
printers, fax, machine, copiers, and scanners. The standards
and logos are uniform among participating nations.
iii
European Union (and EEA) only.
This symbol indicates that this product is not to be
disposed of with your household waste, according
to the WEEE Directive (2002/96/EC) and your
national law. This product should be handed over
to a designated collection point, e.g., on an
authorized one-for-one basis when you buy a new similar
product or to an authorized collection site for recycling waste
electrical and electronic equipment (EEE). Improper handling
of this type of waste could have a possible negative impact on
the environment and human health due to potentially
hazardous substances that are generally associated with EEE.
At the same time, your cooperation in the correct disposal of
this product will contribute to the effective usage of natural
resources. For more information about where you can drop off
your waste equipment for recycling, please contact your local
city office, waste authority, approved WEEE scheme or your
household waste disposal service. For more information
regarding return and recycling of WEEE products, please visit
www.canon-europe.com/environment
.
(EEA: Norway, Iceland and Liechtenstein)
Für EMVG
Dieses Produkt ist zum Gebrauch im Wohnbereich,
Geschäfts-und Gewerbebereich sowie in Kleinbetrieben
vorgesehen.
Für 3. GPSGV
“Maschinenlärminformations-Verordnung 3. GPSGV: Der
höchste Schalldruckpegel beträgt 70 dB(A) oder weniger
gemäß EN ISO 7779”
Model Names
The following names may be provided for the safety
regulations in each sales region of the Document Scanner.
DR-X10C: Model M11063
Trademarks
• Canon and the Canon logo are registered trademarks of
Canon Inc. in the United States and may also be trademarks
or registered trademarks in other countries.
• imageFORMULA is a trademark of Canon Electronics Inc.
• Microsoft and Windows are either registered trademarks or
trademarks of Microsoft Corporation in the United States
and other countries.
• Adobe, Acrobat, and Adobe Reader are registered
trademarks or trademarks of Adobe Systems Incorporated in
the United States and other countries.
TM
•ISIS
is a trademark of EMC Corporation in the United
States.
• Other product and company names herein are, or may be,
the trademarks of their respective owners.
Copyright
Copyright 2007 by CANON ELECTRONICS INC. All rights
reserved.
No part of this publication may be reproduced or transmitted
in any form or by any means, electronic or mechanical,
including photocopying and recording, or by any information
storage or retrieval system without the prior written
permission of CANON ELECTRONICS INC.
Disclaimers
The information in this document is subject to change without
notice.
CANON ELECTRONICS INC. MAKES NO WARRANTY
OF ANY KIND WITH REGARD TO THIS MATERIAL,
EITHER EXPRESS OR IMPLIED, EXPECT AS
PROVIDED HERE IN, INCLUDING WITHOUT
LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OF USE OR NONINFRINGEMENT. CANON ELECTRONICS INC. SHALL
NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM THE USE
OF THIS MATERIAL.
iv
Introduction
Thank you for purchasing the Canon imageFORMULA DR-X10C Document Scanner. Please read this and the following manuals
thoroughly before using the scanner to become acquainted with its capabilities and make the most of its many functions.
After reading the manuals, store them in a safe place for future reference.
Manuals for the Scanner
The documentation for the scanner consists of the Easy Start
Guide and the Reference Guide (this manual) (supplied with
the scanner), the User Manual, and the CapturePerfect3.0
Operation Guide, which are provided in electronic form and
registered in the menu during software installation.
Easy Start Guide
This manual describes the procedures for setting up the
scanner for use. Please follow the procedures in the Easy
Start Guide to set up the scanner.
Reference Guide (This Manual)
This manual consists of the basic scanner operating
instructions extracted from the User Manual.
User Manual (Electronic Manual)
This manual consists of two sections: Hardware and
Software.
The Hardware section provides general information about
the scanner operational settings, maintenance, and
troubleshooting.
The Software section describes how to use the ISIS/
TWAIN driver with the scanner, and how to set up job
registration tools.
Hint
• The User Manual and the CapturePerfect 3.0 document files
are installed in the following locations during software
installation.
User Manual
CapturePerfect 3.0 Operation Guide
• Electronic versions of all manuals are available for viewing
from the Setup CD.
CapturePerfect 3.0 Operation Guide
(Electronic Manual)
This is the operation guide for CapturePerfect 3.0, the
Canon document scanner application program.
v
Symbols Used in This Manual
The following symbols are used in this manual to explain
procedures, restrictions, handling precautions, and
instructions that should be observed for safety.
WARNING
Indicates a warning concerning operations that may lead to
death or injury to persons if not performed correctly. To
use the scanner safely, always pay attention to these
warnings.
CAUTION
Indicates a caution concerning operations that may lead to
injury to persons, or damage to property if not performed
correctly. To use the scanner safely, always pay attention
to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be
sure to read these items carefully to operate the scanner
correctly, and avoid damage to the scanner.
Hint
Indicates a clarification of an operation, or contains
additional explanations for a procedure. Reading these
notes is highly recommended.
How This Manual is Organized
This manual consists of the following chapters.
Chapter 1 Before You Start Using the Scanner
Provides an overview of the DR-X10C
Chapter 2 Basic Operation
Describes the basic uses of the DR-X10C
Chapter 3 Maintenance
Describes routine cleaning and roller replacement
Chapter 4 Practical Examples
Describes displayed messages and troubleshooting
solutions
Chapter 5 Appendix
Provides a list of specifications and support information
vi
Table of Contents
Introduction ............................................................. v
Manuals for the Scanner ..........................................v
Symbols Used in This Manual ................................. vi
How This Manual is Organized................................vi
Chapter 1 Before You Start Using the Scanner
1. Important Safety Instructions .............................. 2
Installation Location................................................. 2
Power ...................................................................... 2
Moving the Scanner................................................. 3
Handling .................................................................. 3
Disposal................................................................... 5
2. Features .............................................................. 6
3. Names and Functions of Parts.......................... 10
Front View, Feeder Inlet, and Eject Outlet............. 10
Rear View .............................................................. 11
Control Panel......................................................... 11
Chapter 2 Basic Operation
1. Turning the Power ON and OFF ....................... 14
About the Power Switch ........................................ 14
2. Documents ........................................................ 15
Acceptable Documents.......................................... 15
3. Document Feed and Eject Trays....................... 17
Preparing the Document Feed Tray...................... 17
Adjusting the Document Guides ............................ 18
Preparing the Document Eject Tray ...................... 20
4. Document Feeding Methods............................. 22
Selecting the Document Feeding Method ............. 22
5. Scanning ...........................................................24
About the Job Function.......................................... 24
CapturePerfect 3.0 ................................................ 25
6. Clearing a Paper Jam or Double Feed Error..... 29
Paper Jam Handling.............................................. 29
Handling a Double Feed........................................ 30
Chapter 3 Maintenance
1. Regular Maintenance........................................ 34
Cleaning the Scanner ............................................ 34
Cleaning the Glass and Rollers ............................. 35
Opening and Closing the Upper Unit..................... 35
Cleaning Rollers with a Cleaning Sheet................ 36
Cleaning the Glass ................................................ 37
Cleaning the Platen Rollers ................................... 38
Cleaning the Pickup and Feed Rollers .................. 39
Cleaning the Retard Roller .................................... 41
2. Replacing the Transport Rollers ....................... 44
Roller Replacement Cycle ..................................... 44
Chapter 4 Practical Examples
1. Messages.......................................................... 46
Status Display........................................................ 46
Error Messages ..................................................... 47
2. Troubleshooting ................................................ 49
Trouble Categories ................................................ 49
Problem and Solution ............................................ 49
Chapter 5 Appendix
1. Specifications.................................................... 54
Unit Specifications ................................................. 54
Consumables......................................................... 56
External Dimensions.............................................. 57
2. Index ................................................................. 58
vii
Chapter 1 Before You Start Using the Scanner
1. Important Safety Instructions .............................. 2
Installation Location ................................................. 2
Power ....................................................................... 2
Moving the Scanner ................................................. 3
Handling ...................................................................3
Disposal ................................................................... 5
2. Features.............................................................. 6
3. Names and Functions of Parts.......................... 10
Front View, Feeder Inlet, and Eject Outlet .............10
Rear View............................................................... 11
Control Panel ......................................................... 11
1. Important Safety Instructions
To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below.
Installation Location
The performance of this scanner is affected by the
environment in which it is installed. Make sure that the
location where the scanner is installed meets the following
environmental requirements.
● Provide adequate space around the scanner for
operation, maintenance, and ventilation.
3.9" (100 mm) or more
25.98" (660 mm)
or more
37.8" (960 mm) or more
● Avoid installing the machine in direct sunlight. If
this is unavoidable, use curtains to shade the
scanner.
● Avoid locations where a considerable amount of
dust accumulates.
● Avoid warm or humid locations, such as in the
vicinity of a water faucet, water heater, or
humidifier, and avoid locations where the fumes
from ammonia, paint thinner, or other volatile
chemicals may be present.
● Avoid locations that are subject to vibration.
● Avoid exposing the scanner to rapid changes in
temperature. If the room in which the scanner is
installed is cold but rapidly heated, water droplets
(condensation) may form inside the scanner. This
may result in a noticeable degradation in scanning
quality.
The following conditions are recommended for
optimal scanning quality:
Room temperature: 10 °C to 32.5 °C (50 °F to
90.5 °F)
Humidity: 20% to 80% RH
● Avoid installing the scanner near equipment that
generates a magnetic field (e.g. speakers,
televisions, or radios).
Power
● Connect only to a power outlet of the rated voltage
and power supply frequency (either 120 V, 60 Hz
or 220-240 V, 50/60 Hz, depending on your
region).
● Do not use the scanner with a power supply that is
not rated for the specified voltage. Doing so might
cause fire or electric shock.
● Do not connect other electrical equipment to the
same power outlet to which the scanner is
connected. Also, when using an extension cord,
make sure that the extension cord is rated for the
current requirements of the scanner.
● The power cord may become damaged if it is often
stepped on or if heavy objects are placed on it.
Continued use of a damaged power cord can lead
to an accident, such as a fire or electrical shock.
● Do not use the power cord while it is coiled.
2
● Do not pull directly on the power cord. When
disconnecting the power cord, grasp the plug and
remove it from the outlet.
● Keep the area around the power plug clear of
objects so that the power cord can be
disconnected easily in an emergency.
● If you have any questions regarding the power
supply, contact your local authorized Canon dealer
or service representative for further information.
Moving the Scanner
● The scanner weights about 86 lbs (39 kg).
To lift or move the scanner, always use two
people, one on each side. Never attempt to lift the
scanner by yourself. You could drop the scanner or
pinch your fingers, resulting in personal injury or
damage to the scanner. Remember to be extra
careful when moving it.
● Make sure to disconnect the interface cable and
power cord when moving the scanner. If the
scanner is carried with these items connected, the
plugs and connectors may be damaged or cause
the scanner to fall and result in personal injury or
damage to the scanner.
Handling
WARNING
Note the following precautions whenever using the
scanner. Failure to do so may result in a fire or
electric shock.
■ Never use alcohol, benzene, paint thinner, aerosol
sprays, or any other highly flammable substance
near the scanner.
■ Do not cut, damage, or modify the power cord. Do
not place heavy objects on the power cord, and do
not pull or excessively bend the power cord.
■ Never connect the power cord when your hands
are wet.
■ Do not connect the scanner to a multiplug power
strip.
■ Do not knot or coil the power cord, as this may
result in a fire or electric shock. When connecting
the power cord, make sure that the power plug is
securely and completely inserted into the power
outlet.
■ To use a reel-type extension cord, unwind all of the
cord from the reel. Long-term operation with the
cord wound on the reel may cause the cord to
overheat and could cause a fire.
■ Do not use power cords other than the power cord
provided with this scanner.
■ Never try to take the scanner apart or modify it in
any way, as this is dangerous and may lead to a
fire or electric shock.
■ Do not use flammable aerosol sprays products
near the scanner.
■ When cleaning the scanner, turn the power switch
OFF and disconnect the power cord from the
power supply.
1
Before You Start Using the Scanner
3
■ Some parts can only be cleaned when the power
is turned ON. In these cases, be careful to avoid
electric shock.
■ Clean the scanner using a slightly dampened cloth
which has been well wrung out. Never use alcohol,
benzene, paint thinner, or any other flammable
substances.
■ If the scanner makes strange noises, or gives off
smoke, heat, or strange odors, or the scanner
does not function or other abnormalities occur
when you use the scanner, immediately turn the
power switch OFF, and disconnect the power plug
from the power outlet. Then, contact your local
authorized Canon dealer or service representative
for further information.
■ Do not drop the scanner, or subject it to impact or
strong shock. Should the scanner ever become
damaged, immediately turn the power switch OFF,
and disconnect the power plug from the power
outlet. Then, contact your local authorized Canon
dealer or service representative to have the unit
serviced.
■ Before moving the scanner, make sure to turn the
power switch OFF, and disconnect the power plug
from the power outlet.
CAUTION
■ Do not install the scanner on a surface that is
unstable or tilted, or in an area subject to
excessive vibrations, as this may cause the
scanner to fall, resulting in personal injury or
damage to the scanner.
■ Do not block the ventilation openings. Doing so
could case the scanner to overheat, creating a risk
of fire.
■ Never place small metal objects such as staples,
paper clips, or jewelry on the scanner. These items
may fall into the scanner, and cause a fire or
electric shock. Should such objects ever fall inside
the scanner, immediately turn the power switch
OFF, and disconnect the power plug from the
power outlet. Then, contact your local authorized
Canon dealer or service representative to have the
unit serviced.
■ Do not locate the scanner in a humid or dusty
location. Doing so may cause a fire or electric
shock.
■ Do not place objects on top of the scanner. Such
objects may tip or fall over, resulting in personal
injury.
■ When unplugging the power cord, grasp it firmly by
its plug. Do not pull directly on the power cord, as
this may damage or expose the cord’s internal
wiring, resulting in a fire or electric shock.
■ Leave sufficient space around the power plug so
that it can be unplugged easily. If objects are
placed around the power plug, you will be unable
to unplug it in an emergency.
■ Do not allow water or flammable substances
(alcohol, paint thinner, benzene, etc.) to spill into
the scanner, as this may result in a fire or electric
shock.
■ Turn OFF the power switch for safety when not
using the scanner for a long period of time, such as
overnight. Also, turn OFF the power switch, and
disconnect the power cord from the power outlet
for safety when the machine will not be used for an
extended period of time, such as during
consecutive holidays.
4
■ Do not wear loose clothing or jewelry that may get
caught in the scanner while you are using it. This
may result in personal injury. Be extra careful of
neckties and long hair. If anything becomes caught
in the scanner, immediately disconnect the power
cord to stop the scanner.
■ Be careful when placing paper in the scanner and
when removing jammed paper. It is possible to cut
your hand on the edge of a sheet of paper.
Disposal
● When disposing of this scanner, make sure to
follow all local ordinances and laws or consult with
the retailer who sold you the scanner.
1
Before You Start Using the Scanner
5
2. Features
The main features of the DR-X10C are described below. Refer to the User Manual for detailed information.
Scanner Features
● Fast Document Feeding
The scanner can scan up to 100 document sheets per
minute of LTR/A4-size paper in black and white,
grayscale, and color scanning modes.
* Scanning conditions: LTR/A4 portrait, duplex, 200 dpi
● Variety of Scanning Modes
The scanner is equipped with six scanning modes:
Black and White, Error Diffusion, Advanced Text
Enhancement, Advanced Text Enhancement II, 256Color Grayscale, and 24-Bit Color.
* Advanced Text Enhancement can clarify scanned text by
processing background or foreground colors.
● 500-Sheet Feeder
Up to 500 plain paper document sheets can be loaded in
the document feed tray.
● USB-Linked Power Switch
This User Mode setting enables the scanner’s power to
be automatically switched ON and OFF according to
the connected computer’s power state. (See “About the
Power Switch” on p. 14.)
● Count-Only Mode
When operating the scanner as a stand-alone device,
this mode counts the number of loaded document
sheets.
● Adjustable Document Feed Tray
The home position height of the document feed tray can
be adjusted up or down according to the number of
document sheets to be loaded. (See “Preparing the
Document Feed Tray” on p. 17.)
● Long Document Mode
Document sheets up to three meters (118.1 inches) long
can be scanned with Paper Size Detection.
● Job Function
Scanning conditions and the saving destination for
image files are registered with the job, so you can scan
using only control panel key operations. (See “About
the Job Function” on p. 24.)
● Selectable Background
Black or white background can be selected for
document scanning.
● Freely Adjustable Document Guides
The left and right document guides can be adjusted so
that documents can be positioned to scan either the left
or right side. (See “Adjusting the Document Guides” on
p. 18.)
● User Mode
The User Mode functions can be employed to set the
scanner for practically any condition. For details on the
User Mode settings, refer to the User Manual.
6
Detection Functions
● Auto Image Type Detection
The scanner automatically detects whether documents
are in black and white or color.
● Auto Paper Size Detection
The document page size is detected before scanning.
Fixed-Size Scanning Auto-Size Detection
Scanning
● Skew Detection Function
The scanner stops feeding when a skewed document is
detected as it touches the edge of the feeder inlet.
● Staple Detection
The scanner stops feeding when it detects the presence
of stapled documents.
● Ultrasonic Double-Feed Detection Function
The scanner stops feeding when the ultrasonic sensor
detects that two or more document pages are feeding at
the same time.
* A non-detection zone can be specified to avoid double-
feed detection in areas such as those containing adhesive
labels.
● Double-Feed Detection by Document Length
The scanner stops feeding when a double feed is
detected by comparing document lengths.
* Using the length of the first document page as a reference,
the scanner detects a double feed when a page of a
different length is fed.
● Prescan
At the start of scanning, this function prescans the first
page of a document and pauses so that you can use the
first image to adjust the brightness and contrast before
resuming scanning.
● Verify Scan
While scanning, the count of document pages scanned
is verified against a pre-specified count or the count
obtained from Count-Only Mode.
● Text Orientation Detection
The text orientation on each page is detected, and the
scanned image is rotated in 90-degree increments as
necessary for normalization.
Image Processing
● Prevent Bleed Through/Remove Background
Prevents the background or original image on the
reverse side of thin originals from appearing in scanned
images.
● Image Rotation
The scanner can rotate scanned images in 90°
increments, or detect the text orientation and rotate the
image in 90° increments to correct its orientation.
● Deskew
The scanner straightens an image when it recognizes
from the image that the document page was fed askew.
Skewed Image Deskewed Image
1
Before You Start Using the Scanner
7
● Dropout and Color Enhancement Functions
Monthly Report
Monthly Report
Monthly Report
Monthly Report
The scanner is equipped with drop-out and
enhancement functions that enable you to specify one
color (red, blue, or green) to be omitted (dropped out) or
enhanced when scanning, respectively.
● Folio Scan
Documents that are too large to fit in the feeder inlet can
be folded and scanned on both sides, and the images
combined into a single image.
Color Document Image with Red Drop-Out
set (red filtered)
● Remove Binder Holes
Erases the shadows that appear on scanned images form
binding holes on the original document.
Image with Binding Holes Image with Binding Holes
● Skip Blank Page
The scanner scans both sides of a document and skips
saving the image of any side it determines to be a blank
page.
Monthly Report
Monthly Report
Monthly Report
Two-Sided Documents
with a Blank Side
Images with Blank Page
Skipped
Front and Back Images Reconstructed Image
* Folio Scan supports up to A1-size (23.4" × 33.1" (594 × 841
mm)) documents when used together with the Long
Document Mode.
● MultiStream Function
The scanner supports MultiStream, which, depending
on the software application, can create two images with
different scanning conditions from a single scan pass.
However, this function is only available when using
CapturePerfect 3.0 (supplied with the scanner) or
another application program that supports the MultiStream function.
Document to be
Scanned
(150 dpi, Color)
(300 dpi, Black & White)
Two Types of Output Image
8
Other Functions
● Rapid Recovery System
When this function is activated and a sensor detects a
misfeed due to a paper jam or double feed, which causes
feeding to stop, scanning pauses to allow you to correct
the cause of the misfeed, after which scanning continues
from the document page on which the abnormality was
detected. (See “Clearing a Paper Jam or Double Feed
Error” on p. 29.)
* The Rapid Recovery System is effective when feeding
stops as a result of detection of a Paper Jam, Double Feed,
Skew, or Staple.
● Dust Countermeasures
The following functions are provided to prevent dust or
paper particles from adhering to the scanning glass and
affecting images.
Blower: Airflow from a fan inside the scanner blows
paper particles from the scanning glass.
Dust Wiper: Before scanning, a brush mounted on a
roller on the opposite side of the scanning glass rotates
to remove paper particles from the glass.
Dust Evasion Mechanism: When a sensor detects dust
on the scanning glass, the sensor is repositioned to
avoid appearing in scanned images.
Options
● Imprinter (Option)
The optional imprinter includes a Pre-Imprinter to print
on documents before scanning, and a Post-Imprinter to
print on documents after scanning.
* The Pre-Imprinter and Post-Imprinter can be used
together.
● Barcode Detection (Option)
Barcodes on documents can be detected by installing
the optional barcode module.
● Patchcode Support (Option)
By installing the optional patchcode decoder, patch
code sheets inserted between document pages can be
detected for batch separation.
1
Before You Start Using the Scanner
9
3. Names and Functions of Parts
The names and functions of the DR-X10C parts are shown below.
Front View, Feeder Inlet, and Eject Outlet
a Document Eject Tray
Scanned documents are output here.
b Document Feed Tray
Load documents to be scanned.
c Power Switch
Turns the scanner ON and OFF.
d Control Panel (See p. 11.)
e Document Guides
Adjust to match the width of documents, so that ejected
documents stack neatly.
f Eject Paper Stoppers
Adjust to match the length of documents, to avoid
document spillage.
g Document Eject Tray Extension
Extend as needed to match the length of the documents.
h Document Guides
Adjust to match the width of documents.
i Document Guide Lock Lever
Locks the Document Guides.
j Document Feeder Tray Extension
Extend as needed to match the length of the documents.
10
Rear View
Control Panel
1
Before You Start Using the Scanner
a USB Connector (Type B)
Connect the supplied USB cable here.
b SCSI Connector (50-pin half-pitch D-sub receptacle)
Connect the SCSI cable here.
c DIP Switch (SCSI ID)
Selects the scanner’s SCSI ID.
d Power Connector
Connect the supplied power cord here.
e Ventilation Holes (Exhaust Fan)
Exhausts heat from inside the scanner.
CAUTION
Do not block the ventilation holes. Doing so could cause the
scanner to overheat, creating a fire hazard.
a Display Panel
Displays the user mode, job info, and messages.
b Enter Key
Selects the user mode, and accepts settings.
c Keys
Selects the user mode and job.
d Menu Key
Displays the user mode.
e Job Key
Displays jobs.
f Count Only Key
Feeds and counts the number of document pages.
g Bypass Mode Key
Raises the document holder for the non-separating
(manual) mode.
h New File Key
When Batch Separation by Key is enabled, separates
batches.
i Start Key
Starts scanning.
j Stop Key
Stops the scanning process.
11
12
Chapter 2 Basic Operation
1. Turning the Power ON and OFF....................... 14
About the Power Switch .........................................14
2. Documents........................................................ 15
Acceptable Documents .......................................... 15
3. Document Feed and Eject Trays ...................... 17
Preparing the Document Feed Tray.......................17
Adjusting the Document Guides............................. 18
Preparing the Document Eject Tray.......................20
4. Document Feeding Methods............................. 22
Selecting the Document Feeding Method..............22
5. Scanning........................................................... 24
About the Job Function .......................................... 24
CapturePerfect 3.0 .................................................25
6. Clearing a Paper Jam or Double Feed Error .... 29
Paper Jam Handling............................................... 29
Handling a Double Feed ........................................30
Loading...