Canon DPUG9 User Manual

Page 1
イレクトプリントユーザーガイド
Direct Print User Guide
Direct Print User Guide
パソコンがなくても大丈夫! カメラとプリンターを接続してかんたんに印
CDI-M206-010 © 2005 CANON INC. PRINTED IN CHINA DPUG9
Page 2
ENGLISH
Introduction
Confirm Your Printer Model and the Section that Applies to You
Operations differ according to your printer model. According to the procedure below, confirm the section and page you should read in this user guide.
Connect the camera to the printer with an appropriate cable and confirm the icon displayed in the camera's LCD monitor.
For instructions on camera and printer connection methods, please refer to page 8.
Icons displayed in the camera's LCD monitor
Confirming the section that applies to you
If one of the aforementioned icons does not appear, the connected printer cannot be used.
When the printer is ready for printing, the button lights in blue. The
button blinks during printing.
Page 3
Confirm your printer model.
Printer model
SELPHY CP series
PIXMA/ SELPHY DS series
Read the page below.
Refer to the sections
indicated
Page 10
" Printing with SELPHY CP Series Printers using PictBridge"
Page 31
" Printing with Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge"
Non-Canon printers*
SELPHY CP series
Bubble Jet printers
* Please also refer to the user guide that came with your printer.
Page 50
" Printing with Non-Canon, PictBridge Compliant Printers"
Page 51
" Printing with SELPHY CP Series Printers using Canon Direct Print"
Page 68
" Printing with Bubble Jet Printers using Bubble Jet Direct"
1
Page 4
For the latest information regarding connections between Canon printers and cameras, please refer to the following URL:
http://web.canon.jp/Imaging/BeBit-e.html http://www.canon.com/pictbridge/
PictBridge Compliance
This camera complies with the industry standard “PictBridge”*. This allows you to also connect your camera to non-Canon PictBridge compliant printers and print images with simple operations using the camera buttons.
* PictBridge: PictBridge is an industry standard for direct printing that
allows you to print images without using a computer by directly connecting digital cameras and digital camcorders (hereafter “camera”) to a printer, regardless of the devices’ brand and model.
Disclaimer
No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon.
Canon reserves the right to change the specifications of the hardware described herein at any time without prior notice.
While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions.
Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the camera, the software, the memory cards, personal computers, peripheral devices, or use of non-Canon memory cards.
Trademark Acknowledgements
Names and products in this guide may be registered trademarks or trademarks of their respective companies.
Copyright © 2005 Canon Inc. All rights reserved.
2
Page 5
Table of Contents
Direct Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Allows for Printing without the Use of a Computer . . . . 6
Various Printing Operations Can Be Performed . . . . . . . 6
You Can Also Perform the Following Printing Operations . .7
Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . . . 7
Printing Multiple Images on a Sheet of Paper . . . . . . . . . 7
ID Photo Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the Camera to the Printer . . . . . . . . . . . . . . . . . 8
Disconnecting the Camera and the Printer. . . . . . . . . . . . . 9
Printing with SELPHY CP Series Printers using PictBridge . . .10
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Easy Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Print after Changing the Print Settings. . . . . . . . . . . . . . 11
Selecting Print Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting the Date and the File Number Printing Option
Setting the Print Effect . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . 14
Setting the Printing Area (Trimming) . . . . . . . . . . . . . . . 15
Selecting the Paper Settings . . . . . . . . . . . . . . . . . . . . . 19
Printing Multiple Images on a Sheet of Paper . . . . . . 21
Printing by Specifying the Print Size
(ID Photo Print) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Printing Images in the Fixed Size . . . . . . . . . . . . . . . 24
Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . . 25
Printing with DPOF Print Settings . . . . . . . . . . . . . . . . . 27
List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
. . . . 13
3
Page 6
Printing with Bubble Jet Printers (PIXMA series/
SELPHY DS series) using PictBridge . . . . . . . . . . . . . . . . . 31
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Print after Changing the Print Settings . . . . . . . . . . . . . .32
Selecting Print Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .34
Setting the Date Printing Option . . . . . . . . . . . . . . . . . . .34
Setting the Print Effect. . . . . . . . . . . . . . . . . . . . . . . . . . .35
Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . .36
Setting the Printing Area (Trimming) . . . . . . . . . . . . . . . .37
Selecting the Paper Settings . . . . . . . . . . . . . . . . . . . . . .41
Printing Multiple Images on a Sheet of Paper. . . . . . .43
Printing with DPOF Print Settings . . . . . . . . . . . . . . . . . . 45
List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Printing with Non-Canon, PictBridge Compliant Printers
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
. . . 50
Printing with SELPHY CP Series Printers using
Canon Direct Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Print after Changing the Print Settings . . . . . . . . . . . . . .51
Selecting Print Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .53
Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . .53
Setting the Print Style (Image, Borders and Date) . . . . .53
Setting the Printing Area (Trimming) . . . . . . . . . . . . . . . .55
Printing by Specifying the Print Size (ID Photo Print)
Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . .62
Printing with DPOF Print Settings . . . . . . . . . . . . . . . . . . 64
List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
. . . . .59
4
Page 7
Printing with Bubble Jet Printers using Bubble Jet Direct
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Setting the Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . 69
. .68
Settings that Can Be Set with the Camera . . . . . . . . . . . . . . . . . 71
SELPHY CP Series Printers using PictBridge . . . . . . 71
Bubble Jet Printers (PIXMA series/SELPHY DS series) using PictBridge
SELPHY CP Series Printers using Canon Direct Print
Bubble Jet Printers using Bubble Jet Direct . . . . . . . 74
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
5
Page 8
Direct Print
Allows for Printing without the Use of a Computer
Connect your camera to the printer with the appropriate cable. Image selection and printing is operated from the camera.
Various Printing Operations Can Be Performed*
Prints to cover the entire surface of the paper. Or, prints with a border.
08/08/2005
Adds the date.
Specifies which portion of the image to print. (Trimming)
Multiple pictures can be printed at once. (DPOF print setting)
* Some settings may not be selectable for Non-Canon printers.
6
Page 9
You Can Also Perform the Following Printing Operations
Printing Movies (Movie Print)
107-J006
1"25
2"50
3"75
7"50
8"75
6"25
12"50
18"75
10"00
13"75
15"00
16"25
20"00
21"25
22"50
Movie frames can be extracted at fairly
5"00
regular intervals and printed on a single sheet of paper (p. 25 or p. 62).
11"25
Capable printers: Canon SELPHY CP
17"50
23"75
Series Printers
Printing Multiple Images on a Sheet of Paper
Compositions of multiple images you specify of the same dimensions can be printed on a single sheet of paper (p. 21 or p. 43).
Moreover, the DPOF print setting* function allows you to separately print different images by specifying the number of frames to be printed per image.
Capable printers: Printers using PictBridge (Including non-Canon Printers)
(This function is not available on some printers.)
ID Photo Print
An image can be trimmed, laid out and printed as ID photos (p. 22 or p. 59).
Capable printers:Canon SELPHY CP Series
Depending on the printer model, an additional printing operation is available as follow:
Printing images in a fixed size (p. 24)
* DPOF print settings
This function allows you to preset the images and the number of copies using the camera button controls. The settings are recorded to a memory card. Please refer to the Camera User Guide for instructions on setting procedure. This guide explains how to print images with DPOF print settings. DPOF=Digital Print Order Format
Printers
7
Page 10
Connecting the Camera to the Printer
Connect the camera to the printer. For instructions on printer and camera operation methods, refer to their respective user guides.
Set one of the following into the camera.
Compact power adapter (sold separately or supplied with the camera)
Fully charged battery
New batteries
Place paper, ink cassette/cartridge, etc. into the printer.
Connect the camera to the printer with the appropriate interface cable supplied with the camera.
DIGITAL terminal
Camera: Connect the cable to
the DIGITAL terminal.
Printer: Refer to the printers
user guide.
This illustration shows the PowerShot SD550 DIGITAL ELPH/ DIGITAL IXUS 750 as an example.
Some printers require specific connection cables which differ from the above cable. Please refer to the printers user guide.
Turn the printer’s power on.
Set the camera to Playback mode and turn the power on.
Depending on the camera model, the camera’s power will automatically turn on when the printers power is turned on.
The following operations are not available during a camera/printer connection.
Language settings that use the SET button and the MENU button.
8
Resetting the camera’s settings to default.
Page 11
Disconnecting the Camera and the Printer
Detach the cable from the printer.
Pull out the cable while holding the connector plug. Do not pull out by the cable.
Turn the camera’s power off.
Detach the cable from the camera.
Pull out the cable while holding the connector plug. Do not pull out by the cable.
9
Page 12
Printing with SELPHY
CP Series Printers using
PictBridge
Printing
Easy Print
You can print images by pressing only one button after connecting the camera to the printer.
Make sure that displays in the upper left corner of the LCD monitor.
1
Display the images you wish to print and press the
2
button.
If you wish to change the print settings, see Print after Changing the Print Settings (p. 11).
10
Page 13
Print after Changing the Print Settings
You can change the print settings before printing.
Make sure that displays in the upper left corner of the LCD monitor.
1
If displays on the LCD monitor, please refer to Printing with
SELPHY CP Series Printers using Canon Direct Print (p. 51).
Display the images you wish
Sets the print effect (p. 14)
Sets the date and the file number for printing (p. 13)
to print and press the SET button.
The print order screen appears.
Depending on the printer model, some setting options may not display.
2
Sets the number of copies (p. 14) Sets the trimming portion (p. 15)
Sets the paper size, type and layout (p. 19)
Starts the printing process
Print Order Screen
Select print settings as needed.
3
Select [Print] and press the SET button.
The image will start to print and, when it is completely finished, the display will revert to the standard playback
4
mode.
If you press the MENU button, the display will revert to the standard playback mode and printing will not take place.
11
Page 14
You cannot print the RAW images.
It may not be possible to play back or print images shot with a different camera.
You may not be able to print if the memory card holds a large number of images (about 1000).
Cancel Printing
To cancel printing between images, press the SET button. A confirmation dialog will display. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper.
Printing Errors
An error message appears if an error occurs for some reason during the printing process. When the error is resolved, printing will automatically resume. If printing does not resume, select [Continue] and press the SET button. If [Continue] cannot be selected, select [Stop], press the SET button and restart the print job. See List of Messages (p. 30) for details.
12
Page 15
Selecting Print Settings
Depending on the camera model, the screens that will be displayed will vary. Please also refer to the user guide that came with your printer.
Default Setting
The Default option is a fixed setting of the printer.
The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available.
Setting the Date and the File Number Printing Option
Select [ ], then select the date and the file number printing option.
You can set the date and the file number printing as follows:
Date Prints only the date.
1
File No. Prints only the file number.
Prints both the date and the
Both
file number.
Prints neither date nor file
Off
number.
Prints using the default
Default
setting.
If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [ ] will be set to [Off]. If you select [Date], [File No.] or [Both], the date/file number will be printed on the embedded information which is also printed.
13
Page 16
Setting the Print Effect
This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects.
On
Off Prints without any effects.
Default Print settings differ according to your printer model.
Uses the camera’s shooting information to deliver optimum prints.
Select [ ] and choose a print effect option.
1
Setting the Number of Copies
Select [ ] and set the number of prints.
1 to 99 copies can be set.
1
14
Page 17
Setting the Printing Area (Trimming)
You can specify a portion of the image for printing. Please set [Paper Settings] (p. 19) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again.
Select [Trimming] and press the SET button.
The trimming frame will appear at the center of the image. If a trimming setting has already been selected for the image, the frame will appear around the previously selected portion.
The trimming setting screen differs depending on the camera model. Check which of the following screens appear before selecting settings.
1
a b
Trimming Frame
Steps 2a and 3a
* Proceed to procedure or depending
on the display screen which appears.
a
Steps 2b and 3b
b
15
Page 18
In the case of display screen
a
Trim the image.
Changing the Size of the Trimming Frame
Press the zoom lever or the zoom button to adjust the size of the trimming frame.
The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
Expanding the trimming frame beyond its maximum size cancels the trimming setting.
2a
When printing an image that has been magnified using the trimming option, the image quality may become coarser and grainier depending on the level of magnification.
Moving the Trimming Frame
Move the trimming frame using the omni selector or the up, down, right and left buttons.
Rotating the Trimming Frame
You can rotate the trimming frame by pressing the DISP. (or DISPLAY) button.
Press the SET button to close the setting menu.
3a
Pressing the MENU button cancels the settings.
16
Page 19
In the case of display screen
b
Trim the image.
Changing the Size of the Trimming Frame
Press the up and down buttons to adjust the size of the trimming frame.
The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
Expanding the trimming frame beyond its maximum size cancels the trimming setting.
When printing an image that has been magnified using the
2b
trimming option, the image quality may become coarser and grainier depending on the level of magnification.
Rotating the Trimming Frame
You can rotate the trimming frame using the left and right buttons.
Moving the Trimming Frame
Press the SET button and use the up, down, right and left buttons to move the trimming frame. Pressing the SET button again allows you to change the size of the frame and to rotate it.
Press the MENU button, select [OK] and press the SET button.
3b
Selecting [Cancel setting] cancels the selected trimming setting. If [Edit] is selected, the display returns to the previous screen.
17
Page 20
The trimming setting only applies to one image.
The trimming setting is canceled with the following operations.
When you set the trimming settings for another image.
When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
The shooting date or part of the date which has been embedded in images using a camera with the Postcard Date Imprint mode may not be printed properly depending on the trimming setting.
The paper size and page layout settings determine the shape of the trimming frame.
Please use the LCD monitor to set the trimming settings. The trimming frame may not display correctly on a TV screen.
18
Page 21
Selecting the Paper Settings
Select [Paper Settings] and press the SET button.
The paper size setting screen
1
2
appears.
Select a paper size and press the SET button.
The default settings and specified paper cassette size are displayed.
The paper type setting screen appears.
* Paper sizes vary according to region.
Press the SET button.
The page layout screen appears.
3
19
Page 22
4
Select a layout.
The following layout can be selected.
Default Print settings differ
Bordered Prints with a border.
Borderless Prints right to the edges
N-up Prints 2, 4 or (8*) images
ID Photo Specifies the print size
Fixed Size Prints by specifying the
* Credit card size paper only
according to your printer model.
of the paper.
on a single sheet of paper (p. 21).
and print portion of an image or a whole image as an ID photo (p. 22).
print size of the image on a sheet of paper (p. 24).
20
Page 23
Printing Multiple Images on a Sheet of Paper
Selecting [N-up] in the layout setting (p. 20) will allow you to specify the following layout settings.
2 images (height 2 x width 1) of the same dimensions are
2
arranged on a single sheet of paper.
4 images (height 2 x width 2) of the same dimensions are
4
arranged on a single sheet of paper.
8 images (height 4 x width 2) of the same dimensions are
8*
arranged on a single sheet of paper or a label sheet.
* This option can only be selected when printing on credit card size
paper.
[Printing example 1] Printing 3 copies of image A in 2-up
Number of copies (p. 14)
Layout 2
DPOF print setting (p. 27) allows you to separately print different images by specifying the number of frames to be printed per image. [Printing example 2] Printing 2 copies of image A and 1 copy of image B in 4-up
DPOF print settings* (p. 27)
Layout 4
Image A: [3] copies
Image A: [2] copies Image B: [1] copies
* Please refer to the Camera User Guide for instructions on DPOF print
setting method.
21
Page 24
Printing by Specifying the Print Size (ID Photo Print)
Selecting [ID Photo] in the layout setting (p. 20) will allow you to specify the print size and print portion of an image or a whole image as an ID photo*.
* Images printed with the ID Photo Print function may not be allowed
as a formal certificate photo. Refer to the party (organization) or administration requiring the photo.
The print size can be specified for only L (Large) resolution images in the camera connected to the printer.
Select [ID Photo], then press the SET button.
T
Specify the print size by selecting the length of the long side and the short side, then press the SET button.
Specify the size by selecting the length of the long side first, then the short side. See the next table for selectable combinations of the long side length and the short side length.
22
Page 25
z Selectable combination
: Available print size
Short Side
20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm
Long Side
70 mm
1.8 inch
2.0 inch
1.4 inch 1.5 inch 1.8 inch 2.0 inch
T
Trim the image to specify the print area.
See Step 2 of Setting the Printing Area (Trimming) (p. 16 and p. 17)
on how to trim the image.
The trimming setting screen differs depending on the camera model.
Trimming Frame
The shape of the trimming frame varies depending on the specified print size.
Use the LCD monitor to specify the print size settings. The trimming frame may not display correctly on a TV screen.
Follow the steps according to the screen that displays on your camera.
23
Page 26
Printing Images in the Fixed Size
Selecting [Fixed Size] in the layout setting (p. 20) will allow you to print by specifying the print size of the image on a sheet of paper.
Select the fixed print size required.
Depending on the paper size, you can select print sizes as follows:
Paper size Print size
Credit Card You cannot select
9 × 13 cm (L size)
10 × 14.8 cm (Postcard size)
4 in. × 8 in./ 10 × 20 cm (Wide size)
the print size.
89 mm × 55 mm Default
7 cm × 10 cm Default
4 in. × 6 in. 7 cm × 10 cm Default
Select a layout and press the SET button. This ends the paper settings operations.
5
The display returns to the print order screen.
24
Page 27
Printing Movies (Movie Print)
You can print movie frames selected automatically at fairly regular intervals laid out in index style on a single sheet of paper.
Select the movie you want to print, then press the SET button.
1
The movie control panel appears.
Select (Print) and press the SET button.
2
Movie Control Panel
If necessary, select [On], [Off] or [Default] in (Caption).
3
Select [Print] and press the SET button.
4
It may not be possible to play back or print movies shot with a different camera.
If you set (Caption) to [On], you can print the file number and the elapsed time of the frame at the same time.
25
Page 28
If you press the button instead of the SET button in Step 1, movie print begins.
The number of printed movie frames per sheet of paper is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.)
Credit card size: 20 frames
L size: 42 frames
Postcard size: 63 frames
Wide size: 84 frames
Selecting [Paper Settings] and pressing the SET button in Step 3 will allow [Paper Size] and [Paper Type] to be selected. However, [Page Layout] cannot be set (p. 20).
26
Page 29
Printing with DPOF Print Settings
For instructions on how to set DPOF print settings, please refer to the DPOF print settings section of the Camera User Guide.
In this section, we will explain how to print several images already specified with DPOF print settings.
In the [ (Play)] menu, select [Print Order] and press the SET button.
1
Select [Print] and press the SET button.
2
Set the print effect and paper settings as required.
Sets the Print Effect (p. 14)
3
Selects the Paper Settings* (p. 19)
* [Page Layout] cannot be set in the
[Paper Settings] when [Index] is selected in the [Set up] option in Step
2.
27
Page 30
Select [Print] and press the SET button.
The image will start to print and, when it is completely finished, the
4
To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date to print in Step 3.
When the print type is set to [Index], the [Date] and [File No.] cannot be printed at the same time.
The ID photo print function cannot be used.
You cannot print movies.
The maximum number of images printed on one page in the Index print type depends on the selected paper size.
Credit card size: 20 images
L size: 42 images
Postcard size: 63 images
Wide size: 84 images
display will revert to the standard playback mode.
If the MENU button is pressed, the display will revert to the print order screen in Step 2 and printing will not take place.
28
Page 31
Cancel Printing
To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper.
Restarting Printing
Select [Resume] and press the SET button. The remaining images can be printed.
Printing cannot be restarted under the following circumstances.
If the print settings have been changed before restarting.
If the image for which the print settings were set has been deleted before restarting.
If there was very little free space on the memory card when the printing was canceled.
If these circumstances apply, you can select [Print] and reprint starting from the first image.
If printing is canceled because the camera battery is depleted, replace with a fully charged battery pack or new batteries, then turn the camera power on again. If you intend to use an extended period of time, you are recommended to power the camera with a compact power adapter (sold separately or supplied with the camera).
Printing Errors
An error message appears if an error occurs for some reason during the printing process. When the error is resolved, printing will automatically resume. If printing does not resume, select [Continue] and press the SET button. If [Continue] cannot be selected, select [Stop], press the SET button and restart the print job. See List of Messages (p. 30) for details.
29
Page 32
List of Messages
The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) Please refer to the printer’s user guide for solutions.
No Paper
No Ink
Paper and ink do not match
Paper Jam The paper jammed during printing.
Paper Error The paper is not correctly set in the printer.
Ink Error The ink casette is experiencing a problem.
Recharge the printer battery
Readjust trimming
Hardware Error
File Error
Print error
Paper cassette is incorrectly inserted or out of paper. Or the paper feed is not operating correctly.
The ink cassette has not been inserted or has run out of ink.
The paper and ink are from different sets.
The printer’s battery pack is depleted.
You attempted to print the image with a different style than the one used when the trimming settings were set.
Check whether or not an error other than a paper or ink error has occurred.
You tried to print an image that is not compatible with PictBridge. Some images that have been recorded with another camera or modified using a computer cannot be printed.
There is an error in the settings. Turn off the printer and turn it on again, then set the print settings correctly.
30
Page 33
Printing with Bubble Jet Printers (PIXMA series/ SELPHY DS series) using
PictBridge
Printing
Easy Print
You can print images by pressing only one button after connecting the camera to the printer.
Make sure that displays in the upper left corner of the LCD monitor.
1
Display the images you wish to print and press the
2
button.
If you wish to change the print settings, see Print after Changing the Print Settings (p. 32).
31
Page 34
Print after Changing the Print Settings
You can change the print settings before printing.
Make sure that displays in the upper left corner of the LCD monitor.
1
Sets the print effect (p. 35)
Sets the date for printing (p. 34)
2
Starts the printing process
Print Order Screen
Select print settings as needed.
3
Select [Print] and press the SET button.
The image will start to print and, when it is completely finished, the display will revert to the standard playback
4
mode.
If you press the MENU button, the display will revert to the standard playback mode and printing will not take place.
If displays on the LCD monitor, please refer to Printing with
Bubble Jet Printers using Bubble Jet Direct (p. 68).
Display the images you wish to print and press the SET button.
The print order screen appears.
Depending on the printer model, some setting options may not display.
Sets the number of copies (p. 36) Sets the trimming portion (p. 37)
Sets the paper size, type and layout (p. 41)
32
Page 35
You cannot print RAW images and movies.
It may not be possible to play back or print images shot with a different camera.
You may not be able to print if the memory card holds a large number of images (about 1000).
Cancel Printing
To cancel printing between images, press the SET button. A confirmation dialog will display. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper.
Printing Errors
An error message appears if an error occurs for some reason during the printing process. When the error is resolved, printing will automatically resume. If printing does not resume, select [Continue] and press the SET button. If [Continue] cannot be selected, select [Stop], press the SET button and restart the print job. See List of Messages (p. 48) for details.
On printers equipped with an operation panel, an error number or message displays on the panel. Please refer to the printer user guide for the remedies corresponding to the error numbers or messages.
33
Page 36
Selecting Print Settings
Depending on the camera model, the screens that will be displayed will vary. Moreover, available settings differ depending on the printer model (unavailable settings will not appear in the menu). For details, refer to the user guide that came with your printer.
Default Setting
The Default option is a fixed setting of the printer.
The [Date], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available.
On printers equipped with an operation panel, you can change the settings for those items set to [Default] using the printer's operation panel.
The setting contents of the Default option differ depending on the printer model. For details, please refer to the printer user guide.
Setting the Date Printing Option
Select [ ], then select the date printing option.
You can set the date printing as follows:
1
Date Prints the date.
Off The date is not printed.
Prints using the default
Default
setting.
34
Page 37
If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [ ] will be set to [Off]. If you select [Date], dates will appear twice on the printed image.
Setting the Print Effect
This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects.
On
Off Prints without any effects.
Vivid
NR Prints with a noise reduction effect.
Vivid+NR Prints using both the [Vivid] and [NR] options.
Default Print settings differ according to your printer model.
Uses the camera’s shooting information to deliver optimum prints.
Prints more vibrant colors, such as the green of trees or the blue of the sea or sky, than the [On] option.
Select [ ] and choose a print effect option.
1
35
Page 38
Setting the Number of Copies
Select [ ] and set the number of prints.
1 to 99 copies can be set.
1
36
Page 39
Setting the Printing Area (Trimming)
You can specify a portion of the image for printing. Please set [Paper Settings] (p. 41) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again.
Select [Trimming] and press the SET button.
The trimming frame will appear at the center of the image. If a trimming setting has already been selected for the image, the frame will appear around the previously selected portion.
The trimming setting screen differs depending on the camera model. Check which of the following screens appear before selecting settings.
1
a b
Trimming Frame
Steps 2a and 3a
* Proceed to procedure or depending
on the display screen which appears.
a
Steps 2b and 3b
b
37
Page 40
In the case of display screen
a
Trim the image.
Changing the Size of the Trimming Frame
Press the zoom lever or the zoom button to adjust the size of the trimming frame.
The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
Expanding the trimming frame beyond its maximum size cancels the trimming setting.
2a
When printing an image that has been magnified using the trimming option, the image quality may become coarser and grainier depending on the level of magnification.
Moving the Trimming Frame
Move the trimming frame using the omni selector or the up, down, right and left buttons.
Rotating the Trimming Frame
You can rotate the trimming frame by pressing the DISP. (or DISPLAY) button.
Press the SET button to close the setting menu.
3a
Pressing the MENU button cancels the settings.
38
Page 41
In the case of display screen
b
Trim the image.
Changing the Size of the Trimming Frame
Press the up and down buttons to adjust the size of the trimming frame.
The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
Expanding the trimming frame beyond its maximum size cancels the trimming setting.
When printing an image that has been magnified using the
2b
trimming option, the image quality may become coarser and grainier depending on the level of magnification.
Rotating the Trimming Frame
You can rotate the trimming frame using the left and right buttons.
Moving the Trimming Frame
Press the SET button and use the up, down, right and left buttons to move the trimming frame. Pressing the SET button again allows you to change the size of the frame and to rotate it.
Press the MENU button, select [OK] and press the SET button.
3b
Selecting [Cancel setting] cancels the selected trimming setting. If [Edit] is selected, the display returns to the previous screen.
39
Page 42
The trimming setting only applies to one image.
The trimming setting is canceled with the following operations.
When you set the trimming settings for another image.
When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
The shooting date or part of the date which has been embedded in images using a camera with the Postcard Date Imprint mode may not be printed properly depending on the trimming setting.
The paper size and page layout settings determine the shape of the trimming frame.
Please use the LCD monitor to set the trimming settings. The trimming frame may not display correctly on a TV screen.
40
Page 43
Selecting the Paper Settings
Select [Paper Settings] and press the SET button.
The paper size setting screen
1
2
appears.
Select a paper size and press the SET button.
The following paper sizes* are available: 4" × 6", 5" × 7" or 13 × 18 cm, 8.5" × 11" or A4, CreditCard, A3, 13" × 19" or A3+ and Default.
Some sizes are not available with certain cameras and printer models.
The paper type setting screen appears.
* Paper sizes vary according to region.
41
Page 44
3
4
Select a paper type and press the SET button.
The following paper types can be selected.
Photo Prints on Photo Paper
Fast Photo Prints on Photo Paper Pro
Plain Prints on plain paper. Default Print settings differ
* Canon brand paper
Other kind of paper may be used. For the usable paper, please also refer to the printer user guide.
The option you can select will depend on the printer model and paper size.
Plus Glossy paper*.
paper*.
according to your printer model.
The Page Layout screen appears.
Select a layout.
The following layout can be selected.
Bordered Prints with a border. Borderless Prints right to the edges of
N-up* Prints 2, 4, 9 or 16 images
Default Print settings differ
* Appears only if you select [4" × 6"] in
[Paper Size].
the paper.
on a single sheet of paper (p. 43).
according to your printer model.
42
Page 45
Printing Multiple Images on a Sheet of Paper
Selecting [4" x 6"] in the paper size setting (p. 41) will allow you to specify the following layout settings.
2 images (height 2 x width 1) of the same
2
dimensions are arranged on a single sheet of paper.
4 images (height 2 x width 2) of the same
4
dimensions are arranged on a single sheet of paper.
9 images (height 3 x width 3) of the same
9
dimensions are arranged on a single sheet of paper.
16 images (height 4 x width 4) of the same
16
dimensions are arranged on a single sheet of paper.
[Printing example 1] Printing 3 copies of image A in 2-up
Number of copies (p. 36)
Layout 2
DPOF print setting (p. 45) allows you to separately print different images by specifying the number of frames to be printed per image. [Printing example 2] Printing 3 copies of image A and 2 copies of image B in 9-up
DPOF print settings* (p. 45)
Layout 9
Image A: [3] copies
Image A: [3] copies Image B: [2] copies
* Please refer to the Camera User Guide for instructions on DPOF print
setting method.
43
Page 46
Select a layout and press the SET button. This ends the paper settings operations.
5
The display returns to the print order screen.
Images will print with borders, even if [Borderless] was selected with the camera in the following cases:
•When [Plain] is selected in the camera's [Paper Type] (cannot be
selected depending on the connected printer model)
•With printers equipped with an operation panel, when [Plain] is selected
with the printer and [Default] is selected in the camera's [Paper Type].
44
Page 47
Printing with DPOF Print Settings
For instructions on how to set DPOF print settings, please refer to the DPOF print settings section of the Camera User Guide.
In this section, we will explain how to print several images already specified with DPOF print settings.
In the [ (Play)] menu, select [Print Order] and press the SET button.
1
Select [Print] and press the SET button.
2
Set the print effect and paper settings as required.
Sets the Print Effect (p. 35)
3
Selects the Paper Settings* (p. 41)
* [Page Layout] cannot be set in the
[Paper Settings] when [Index] is selected in the [Set up] option in Step
2.
45
Page 48
Select [Print] and press the SET button.
The image will start to print and, when it is completely finished, the
4
To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date in Step 3.
When the print type is set to [Index], both the [Date] and [File No.] cannot be printed depending on the printer.
When the print type is set to [Standard], the [File No.] cannot be printed.
display will revert to the standard playback mode.
If the MENU button is pressed, the display will revert to the print order screen in Step 2 and printing will not take place.
46
Page 49
Cancel Printing
To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper.
Restarting Printing
Select [Resume] and press the SET button. The remaining images can be printed.
Printing cannot be restarted under the following circumstances.
If the print settings have been changed before restarting.
If the image for which the print settings were set has been deleted before restarting.
If there was very little free space on the memory card when the printing was canceled.
If these circumstances apply, you can select [Print] and reprint starting from the first image.
If printing is canceled because the camera battery is depleted, replace with a fully charged battery pack or new batteries, then turn the camera power on again. If you intend to use an extended period of time, you are recommended to power the camera with a compact power adapter (sold separately or supplied with the camera).
Printing Errors
An error message appears if an error occurs for some reason during the printing process. When the error is resolved, printing will automatically resume. If printing does not resume, select [Continue] and press the SET button. If [Continue] cannot be selected, select [Stop], press the SET button and restart the print job. See List of Messages (p. 48) for details.
On printers equipped with an operation panel, an error number or message displays on the panel. Please refer to the printer user guide for the remedies corresponding to the error numbers or messages.
47
Page 50
List of Messages
The following messages may appear on the camera LCD monitor if an error occurs during a camera and printer connection. (Depending on the printer, some messages may not appear.)
Please refer to the printer’s user guide for the appropriate remedies.
: Printing restarts if you select [Continue] and press the SET
button. For the remedies to other messages that might appear, refer to your printer’s user guide.
There is no paper set in the printer. If you are using
No Paper
Paper Jam
Paper Error
No Ink
Low ink level
Waste tank full
Ink Error
a printer equipped with a photo paper cassette, specify the paper feed location using the Paper Feed switch.
The paper jammed during printing. Select [Stop] to cancel printing. After removing the paper, set some paper again and press the RESUME/CANCEL button on the printer.
The paper is not correctly set in the printer. Also open the paper output tray if it is closed.
The ink tank has run out of ink or there is no ink tank in the printer.
The ink tank needs to be replaced soon. Prepare a new ink tank. If you select [Continue] in the error screen, you can restart printing.
You can restart printing if you select [Continue] in the error screen. Please request replacement of the waste tank (waste ink absorber) from the shop where you purchased the printer or your nearest Canon Customer Support center listed in the Contact List provided with the printer or in the user guide.
Check the level of the printer’s ink and the condition of the waste tank (waste ink absorber).
48
Page 51
Disconnect the cable from the printer and turn off the printer power. Then reconnect the cable and turn on the printer. If the error persists, please
Printer error
Printer in use
Paper lever error
Printer cover open Close the printer cover securely.
No print head No print head is installed in the printer.
Hardware Error
File Error
Incompatible paper size
Print error
Check print settings
consult the dealer where you purchased your printer or your nearest Canon Customer Support center (listed in the Contact List provided with the printer).
The printer is in use now. The printer automatically starts printing the images from the camera after completing the current printing.
Adjust the paper thickness lever to the proper position.
Check whether or not an error other than a paper or ink error has occurred. Or check the printer’s battery level when using a battery-operated printer.
You tried to print an image that is not compatible with PictBridge. Some images that have been recorded with another camera or modified using a computer cannot be printed.
Paper of a different size than the specified paper size is set to the printer. Select [Continue] on the error screen to display the paper size setting screen. Correct the paper size using the screen (only the selectable paper sizes appear on the screen).
Check that the correct paper size is selected. If this error message appears even when the correct paper size is set, turn off the printer, then turn it on again. If the error persists, please consult the dealer where you purchased your printer or your nearest Canon Customer Support center (listed in the Contact List provided with the printer).
Unprintable settings are included. Select [Continue] on the error screen to display the print order screen. Check the print settings (only the printable settings appear on the screen), change the settings if necessary, then print again.
49
Page 52
Printing with Non-Canon,
PictBridge
Printing
Compliant Printers
Make sure that displays in the upper left corner of the LCD monitor.
1
After this step, follow the procedures in the section Printing with Bubble Jet Printers (PIXMA series/SELPHY DS series) using PictBridge (p. 31) to print your images.
However, the following menu options cannot be set.
Print Effect (p. 35):[Vivid], [NR], [Vivid+NR]
Paper Size (p. 41):[13" x 19"/A3
Please also refer to the user guide that came with your printer.
+
] and [5" x 7"/13 x 18cm]
50
Page 53
Printing with SELPHY
CP Series Printers using
Canon Direct Print
Printing
Easy Print
You can print images by pressing only one button after connecting the camera to the printer.
Make sure that displays in the upper left corner of the LCD monitor.
1
Display the images you wish to print and press the
2
Print after Changing the Print Settings
You can change the print settings before printing.
1
button.
If you wish to change the print settings, see Print after Changing the Print Settings below.
Make sure that displays in the upper left corner of the LCD monitor.
If displays on the LCD monitor, please refer to
SELPHY CP Series Printers using PictBridge (p. 10).
Printing with
51
Page 54
Sets the Number of Copies (p. 53)
Display the images you wish to print and press the SET button.
The print order screen appears.
2
Sets the Print Style (p. 53)
Sets the Printing Area (Trimming)
Print Order Screen
Select print settings as required.
3
Select [Print] and press the SET button.
If you press the MENU button, the display will revert to the
4
standard playback mode and printing will not take place.
You cannot print the RAW images.
It may not be possible to play back or print images shot with a different camera.
Cancel Printing
You cannot stop printing when printing only one copy of an image. If you are printing more than one copy or more than one image, you can cancel the rest of the printing by pressing the SET button. Once the current print is finished, a confirmation dialog appears. Select [OK] and press the SET button.
Printing Errors
An error message appears if an error occurs for some reason during the printing process. Select [Stop] or [Resume] and press the SET button. See List of Messages (p. 67) for details. The [Resume] option may not appear with some types of errors. In that case, select [Stop].
(p. 55)
52
Page 55
Selecting Print Settings
Setting the Number of Copies
In the print order screen, select [ ] and set the number of prints.
1
1 to 99 copies can be set.
Setting the Print Style (Image, Borders and Date)
You can select from among the following print styles.
Standard Prints one image per page.
Image
Borders
Date
* This option can only be selected when printing on credit card size paper.
In the print order screen, select [Style] and press
1
the SET button.
Multiple*
ID Photo Prints a specified print size (p. 59).
Borderless Prints right to the edges of the paper.
Bordered Prints with a border.
On Adds the date to the print.
Off Prints without the date.
Prints eight copies of the same image on one page.
Select [Image], [Borders], or [Date].
2
53
Page 56
Select settings as needed.
3
Press the MENU button to end the setting selection process.
With borderless or multiple prints, the top, bottom and sides of the
4
Print Area Frame
If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image.
When printing multiple prints, the [Borders] and the [Date] cannot be set. (Images are printed without any date or borders.)
Practically all of the image area displayed on the LCD monitor is printed on bordered prints.
image may be cropped slightly. If you have not specified a trimming setting, a frame will appear around the area of the image that will be printed, allowing you to check the portion that will be cropped.
54
Page 57
Setting the Printing Area (Trimming)
You can specify which portion of an image gets printed. Please set the Print Style (Image, Borders and Date) before setting the trimming settings. If the print style is changed after having made the trimming settings, you must select the settings again.
Select [Trimming] and press the SET button.
The trimming frame will appear at the center of the image. If a trimming setting has already been selected for the image, the frame will appear around the previously selected portion.
The trimming setting screen differs depending on the camera model. Check which of the following screens appear before selecting settings.
1
a b
Trimming Frame
Steps 2a and 3a
* Proceed to procedure or depending
on the display screen which appears.
a
Steps 2b and 3b
b
55
Page 58
In the case of display screen
a
Trim the image.
Changing the Size of the Trimming Frame
Press the zoom lever or the zoom button to adjust the size of the trimming frame.
The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
Expanding the trimming frame beyond its maximum size cancels the trimming setting.
2a
When printing an image that has been magnified using the trimming option, the image quality may become coarser and grainier depending on the level of magnification. If this happens, the trimming frame displays in red.
Moving the Trimming Frame
Move the trimming frame using the omni selector or the up, down, right and left buttons.
Rotating the Trimming Frame
You can rotate the trimming frame by pressing the DISP. (or DISPLAY) button.
Press the SET button to close the setting menu.
3a
Pressing the MENU button cancels the settings.
56
Page 59
In the case of display screen
b
Trim the image.
Changing the Size of the Trimming Frame
Press the up and down buttons to adjust the size of the trimming frame.
The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
Expanding the trimming frame beyond its maximum size cancels the trimming setting.
When printing an image that has been magnified using the
2b
trimming option, the image quality may become coarser and grainier depending on the level of magnification. If this happens, the trimming frame displays in red.
Rotating the Trimming Frame
You can rotate the trimming frame using the left and right buttons.
Moving the Trimming Frame
Press the SET button and use the up, down, right and left buttons to move the trimming frame. Pressing the SET button again allows you to change the size of the frame and to rotate it.
Press the MENU button, select [OK] and press the SET button.
3b
Selecting [Cancel setting] cancels the selected trimming setting. If [Edit] is selected, the display returns to the previous screen.
57
Page 60
The trimming setting only applies to one image.
The trimming setting is canceled with the following operations.
When you set the trimming settings for another image.
When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
The shooting date or part of the date which has been embedded in images using a camera with the Postcard Date Imprint mode may not be printed properly depending on the trimming setting.
The selected image and border settings determine the shape of the trimming frame.
Please use the LCD monitor to set the trimming settings. The trimming frame may not display correctly on a TV screen.
58
Page 61
Printing by Specifying the Print Size (ID Photo Print)
You can specify the print size and print portion of an image or a whole image as an ID photo*.
* Images printed with the ID Photo Print function may not be allowed as a
formal certificate photo. Refer to the party (organization) or administration requiring the photo.
The print size can be specified for only L (Large) resolution images in the camera connected to the printer.
In the print order screen, select [Style] and press the SET button.
1
Select [Image], then select [ID Photo]. Specify the print size by selecting the length of the long side and the short side, then press the SET
2
button.
Specify the size by selecting the length of the long side first, then the short side. See the next table for selectable combinations of the long side length and the short side length.
59
Page 62
z Selectable combination
: Available print size
20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 5 0 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm
Long Side
70 mm
1.8 inch
2.0 inch
1.4 inch 1.5 inch 1.8 inch 2.0 inch
Short Side
Trim the image to specify the print area.
See Step 2 of Setting the Printing Area (Trimming) (p. 56 and p. 57)
on how to trim the image.
3
The trimming setting screen differs depending on the camera model.
Trimming Frame
Press the SET button to close the setting menu.
4
Follow the steps according to the screen that displays on your camera.
60
Page 63
The print size setting only applies to one image.
The print size setting is canceled with the following operations:
When you set the print size settings for another image.
When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
The shape of the trimming frame varies depending on the specified print size.
Use the LCD monitor to specify the print size settings. The trimming frame may not display correctly on a TV screen.
61
Page 64
Printing Movies (Movie Print)
You can print movie frames selected automatically at fairly regular intervals laid out in index style on a single sheet of paper.
Select the movie you want to print, then press the SET button.
1
The movie control panel appears.
Select (Print) and press the SET button.
2
Movie Control Panel
If necessary, select [On] or [Off] in (Caption).
If you set (Caption) to [On], you
3
Select [Print] and press the SET button.
4
It may not be possible to play back or print movies shot with a different camera.
can print the file number and the elapsed time of the frame at the same time.
62
Page 65
If you press the button instead of the SET button in Step 1, movie print begins.
The number of printed movie frames per sheet of paper is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.)
Credit card size: 20 frames
L size: 42 frames
Postcard size: 63 frames
Wide size: 63 frames
63
Page 66
Printing with DPOF Print Settings
For instructions on how to set DPOF print settings, please refer to the DPOF print settings section of the Camera User Guide.
In this section, we will explain how to print several images already specified with DPOF print settings.
In the [ (Play)] menu, select [Print Order] and press the SET button.
1
Select [Print] and press the SET button.
2
Set the print style settings as required.
See Setting the Print Style
3
(Image, Borders and Date)
(p. 53).
A print style cannot be set if [Set up] on the screen in Step 2 is set to [Index].
64
Page 67
Select [Print] and press the SET button.
The image will start to print and, when it is completely finished, the
4
To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date to print with the [Style] menu in Step 3.
When the print type is set to [Index], the [Date] cannot be printed.
When the print type is set to [Standard], the [File No.] cannot be printed.
The ID photo print function cannot be used.
You cannot print movies.
The maximum number of images printed on one page in the Index print type depends on the selected paper size.
Credit card size: 20 images
L size: 42 images
Postcard size: 63 images
Wide size: 63 images
Cancel Printing
To cancel printing between images printed, press the SET button. Once the current print is completed, a confirmation dialog appears. Select [OK] and press the SET button.
display will revert to the standard playback mode.
If the MENU button is pressed, the display will revert to the print order screen in Step 2 and printing will not take place.
65
Page 68
Restarting Printing
Select [Resume] and press the SET button. The remaining images can be printed.
Printing cannot be restarted under the following circumstances.
If the print settings have been changed before restarting.
If the image for which the print settings were set has been deleted before restarting.
If there was very little free space on the memory card when the printing was canceled.
If these circumstances apply, you can select [Print] and reprint starting from the first image.
If printing is canceled because the camera battery is depleted, replace with a fully charged battery pack or new batteries, then turn the camera power on again. If you intend to use an extended period of time, you are recommended to power the camera with a compact power adapter (sold separately or supplied with the camera).
Printing Errors
An error message appears if an error occurs for some reason during the printing process. Select [Stop] or [Resume] and press the SET button.
* The [Resume] option may not appear with some types of
errors. In that case, select [Stop].
66
Page 69
List of Messages
The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.)
Please refer to the printers user guide for solutions.
No Paper
No Ink
Incompatible paper size
Incompatible ink size
Ink Cassette Error The ink cassette is experiencing a problem.
Paper and ink do not match
Paper Jam The paper jammed during printing.
Paper has been changed
Recharge the printer battery
Communication Error
Readjust trimming
Cannot Print!
Could not print xx images
Paper cassette is incorrectly inserted or out of paper. Or the paper feed is not operating correctly.
The ink cassette has not been inserted or has run out of ink.
Wrong paper size is loaded in the printer.
Wrong ink cassette size is loaded in the printer.
The paper and ink are from different sets.
Paper was changed after the print style was displayed.
The printers battery pack is depleted.
The printer is experiencing a data transmission error.
You attempted to print the image with a different style than the one used when the trimming settings were set.
You attempted to print an image that was photographed with another camera, one recorded in a different data type, or one that has been edited on a computer.
You attempted to use the DPOF print settings to print xx images that were photographed with another camera, that have been recorded in a different data type, or that have been edited on a computer.
67
Page 70
Printing with Bubble
Jet Printers using
Bubble
Jet Direct
Printing
Make sure that displays in the upper left corner of the LCD monitor.
1
After this step, follow the procedures in the section Printing with SELPHY CP Series Printers using Canon Direct Print (p. 51) to
print your images.
However, please note that some menus and precautions differ, as listed below.
See pages 52 and 65.
You cannot print movies or RAW images.
If displays, refer to Printing
with Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge (p. 31).
68
Page 71
Cancel Printing
To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper.
Printing Errors
An error message appears if an error occurs for some reason during the printing process. When the error is resolved, printing will automatically resume. If printing does not resume, select [Continue] and press the SET button. If [Continue] cannot be selected, select [Stop], press the SET button and restart the print job.
With printers equipped with an operation panel, the error number displays on the panel. Please refer to the printer user guide for the remedies corresponding to the error numbers.
See page 53.
Setting the Print Style
You can select from among the following print styles.
Select the paper size from the following:
Paper
Borders
Date
Borderless Prints right to the edges of the paper.
Bordered Prints with a border.
On Adds the date to the print.
Off Prints without the date.
[Card #1], [Card #2], [Card #3], [LTR] or [A4]. For the usable paper type, please refer to the printer user guide.
69
Page 72
The ID photo print function cannot be used.
If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image.
See page 65.
To print the date, set the [Date] setting in [Set up] on the screen in Step 2 to [On]. You cannot set the date to print with the [Style] menu in Step 3.
When the print type is set to [Index], the [Date] and [File No.] cannot be printed at the same time.
When the print type is set to [Standard], the [File No.] cannot be printed.
The ID photo print function cannot be used.
70
Page 73
Settings that Can Be Set with the Camera
SELPHY CP Series Printers using
PictBridge
(When appears on the camera’s LCD monitor during a connection )
Print Options Selectable with the Camera
Date
File No.
Date/File No.
Print Effect
Number of Prints 1 to 99
Trimming
Paper Settings
Movies (Movie Print)
* This option can only be selected when [CreditCard] size paper is set.
Both
Off
Default
Off
On
Default
Paper Size
Page Layout
CreditCard
9 × 13 cm
10 × 14.8 cm
4" × 8" or 10 × 20 cm
Default
Bordered
Borderless
N-up 2/4/(8*)
ID Photo
Fixed Size
Default
71
Page 74
Bubble Jet Printers (PIXMA series/
SELPHY DS series) using PictBridge
(When appears on the camera’s LCD monitor during a connection) Some settings are not available with certain cameras and printers.
Print Options Selectable with the Camera
Date
Date
Print Effect
Number of Prints 1 to 99
Trimming
Off
Default
Off
On
Vivid
NR
Vivid+NR
Default
72
Page 75
4" × 6"
5" × 7" or 13 × 18 cm
8.5" × 11" or A4
Paper Size*
1
CreditCard
A3
13" × 19" or A3+
Default
Paper Settings
Paper Type
Photo
Fast Photo
Plain
Default
Bordered
Page Layout
Borderless
2
N-up*
Default
*1Paper sizes vary according to region.
2
This option can be specified by selecting [4" x 6"] in [Paper Size].
*
2/4/9/16
73
Page 76
SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct
(When or appears on the camera’s LCD monitor during a connection)
SELPHY
CP series
Print Options Selectable with the Camera
Number of Prints 1 to 99 {{
1 image {
Image
Multiple {
ID Photo {
Style
Trimming {{
Movies (Movie Print) {
* Paper size will be set automatically according to the paper cassette set to
the printer.
Card #1, Card #2,
Paper
Card #3, Letter (LTR) or A4
Bordered {{
Borders
Borderless {{
Date {{
Printers
using
Canon
Direct Print
Bubble Jet
Printers
using
Bubble Jet
Direct
–* {
74
Page 77
MEMO
75
Page 78
MEMO
76
Loading...