Canon DIGITAL IXUS 700 User Manual

ENGLISH

Camera User Guide

Please read the Read This First section (p. 6). Please also read the Canon Digital Camera Software Starter Guide Disk and the Direct Print User Guide.

Flowchart and Reference Guides

This Guide

Shooting with the Camera

Canon Digital Camera Software Starter Guide Disk

Installing the Software

This Guide

Connecting the Camera to a Computer

This Guide Canon Digital Camera Software Starter Guide Disk

Downloading Images to a Computer

Direct Print User Guide Printer User Guide

Using the Printer and Printing

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of nongenuine Canon accessories, although you may request such repairs on a chargeable basis.

Camera Body Temperature

If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period.

About the LCD Monitor

The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots. This has no effect on the recorded image and does not constitute a malfunction.

Video Format

Please set the camera’s video signal format to the one used in your region before using it with a TV monitor (p. 156).

Charging the Date/Time Battery

• The camera has a built-in rechargeable lithium-ion battery that maintains the date, time and other camera settings. This battery recharges when the main battery pack is inserted into the camera. When you first purchase the camera, place a charged battery pack in it for at least 4 hours to charge the date/time battery. It will charge even when the camera power is turned off.

• If the Date/Time menu appears when the camera power is turned on, it means that the date/time battery charge is depleted. Recharge it as described above.

About This Guide

Conventions Used in the Text

Icons appearing beside or below titles indicate the modes in which the procedure can be used. In the example below, the Self-timer mode can be used in the following shooting modes.

• Auto • Manual • Special Scene

Movie • Digital Macro • My Colors

•

Stitch Assist

•

Using the Self-timer

: This mark denotes issues that may affect the camera’s operation.

: This mark denotes additional topics that complement the basic

operating procedures.

In this guide an SD memory card (Secure Digital, a copyright protection system) is referred to as an SD card.

Table of Contents

Items marked with are lists or charts that summarize camera functions or procedures.

Read This First

Please Read......................................................................................... 6

Safety Precautions .............................................................................. 7

Preventing Malfunctions ................................................................... 12

Components Guide

Components Guide........................................................................... 13

Preparing the Camera

Charging the Battery Pack ................................................................. 19

Installing the Battery Pack ................................................................. 22

Installing the SD Card ....................................................................... 24

Formatting SD Cards..................................................................... 26

Setting the Date and Time ................................................................. 29

Setting the Language ........................................................................ 32

Basic Functions

Turning the Power On ....................................................................... 34

Using the LCD Monitor...................................................................... 36

LCD Monitor Brightness .................................................................... 38

Information Displayed on the LCD Monitor ....................................... 39

Using the Viewfinder ......................................................................... 43

Using the Zoom................................................................................. 44

Pressing the Shutter Button .............................................................. 45

Selecting Menus and Settings ........................................................... 47

Menu Settings and Factory Defaults.................................................. 52

Resetting Settings to Their Default Values ........................................ 58

Shooting

Shooting in Auto Mode .............................................................. 59

Reviewing an Image Right After Shooting......................................... 60

Changing Resolution/Compression Settings ..................................... 62

Using the Flash ............................................................................. 64

Shooting in a Special Scene Mode .......................................... 66

Shooting in Manual Mode ....................................................... 69

Shooting Close-Ups/ Infinity Shots ..................................... 70

Magnified Close-Up Shooting (Digital Macro) ................................... 72

Using the Digital Zoom ...................................................................... 74

Continuous Shooting ................................................................... 75

Postcard Date Imprint Mode.............................................................. 76

Using the Self-timer ..................................................................... 78

Shooting a Movie ........................................................................ 81

Shooting Panoramic Images (Stitch Assist) ...................................... 86

Switching between Focusing Modes.................................................. 89

Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock).................. 90

Locking the Exposure Setting (AE Lock)............................................ 92

Locking the Flash Exposure Setting (FE Lock) ................................... 93

Switching between Metering Modes ........................................... 94

Adjusting the Exposure Compensation .............................................. 95

Shooting in Long Shutter Mode......................................................... 96

Adjusting the Tone (White Balance)................................................... 98

Changing the Photo Effect ............................................................... 101

Shooting in a My Colors Mode ........................................................ 102

Adjusting the ISO Speed .................................................................. 109

Setting the Auto Rotate Function ..................................................... 110

Resetting the File Number ............................................................... 111

Playback

Displaying Images Individually ........................................................ 113

Magnifying Images .................................................................... 114

Viewing Images in Sets of Nine (Index Playback) .................... 115

Jumping to Images............................................................... 117

Viewing Movies ............................................................................... 118

Editing Movies ................................................................................. 121

Rotating Images in the Display ........................................................ 123

Attaching Sound Memos to Images................................................. 124

Automated Playback (Slide Shows) ................................................. 126

Protecting Images ........................................................................... 130

Erasing

Erasing Single Images ............................................................... 131

Erasing All Images ........................................................................... 132

Print Settings

About Printing ................................................................................. 134

Setting the DPOF Print Settings ....................................................... 136

Image Transmission Settings (DPOF Transfer Order)

Selecting Images for Transferring ................................................... 142

Connecting the Camera to a Computer

Connecting the Camera to a Computer ............................................ 146

Computer System Requirements ................................................ 146

Downloading Images by Direct Transfer ......................................... 152

Connecting the Camera to the Computer to Download Images Without

Installing Software ................................................................... 154

Downloading from an SD Card ........................................................ 154

Viewing Images on a TV set

Viewing Images on a TV set ............................................................ 155

Customizing the Camera (My Camera Settings)

Changing My Camera Settings ........................................................ 157

Registering My Camera Settings ..................................................... 159

List of Messages

List of Messages ............................................................................. 162

Troubleshooting

Troubleshooting .............................................................................. 164

Appendix

Using an AC Adapter Kit (Sold Separately) ...................................... 169

Using an Externally Mounted Flash (Sold Separately) ..................... 170

Camera Care and Maintenance ........................................................ 172

Specifications.................................................................................. 173

Photo Tips and Information............................................................. 181

Index ............................................................................................... 183

Functions Available in Each Shooting Mode .................................... 192

Read This First

Please Read

Test Shots

Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including SD memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.

Warning Against Copyright Infringement

Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use.

Warranty Limitations

For information on your camera's warranty, please refer to the Canon European Warranty System (EWS) Booklet supplied with your camera.

For Canon Customer Support contacts, please see rear of this booklet or the European Warranty System (EWS) Booklet.

Safety Precautions

• Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly.

• The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.

• In the next few pages, the term equipment refers primarily to the camera and its power supply accessories, such as the battery charger and separately sold compact power adapter. See the System Map for power supply accessory details.

Storing SD cards

Store the SD memory card out of the reach of children and infants.

It may be swallowed accidentally. If this occurs, consult a doctor immediately.

Warnings

• Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight.

• Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.

• Store this equipment out of the reach of children and infants. Accidental damage to the camera or battery pack by a child could result in serious injury. In addition, placement of the strap around the child’s neck could result in asphyxiation.

• Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections, alterations and repairs should be conducted by qualified service personnel authorized by your camera distributor or a Canon Customer Support Help Desk.

• To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it has been damaged. Similarly, never touch

internal portions of the equipment that become exposed as a result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunity to consult your camera distributor or the closest Canon Customer Support Help Desk.

• Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do so may result in fire or electrical shock. Immediately turn the camera power off, remove the battery pack or unplug the battery charger from the power outlet. Confirm that smoke or fume emissions have ceased. Please consult your camera distributor or the closest Canon Customer Support Help Desk.

• Stop operating the equipment if it is dropped or the casing is damaged. Failure to do so may result in fire or electrical shock. Immediately turn the camera power off, remove the battery pack or unplug the power cable from the power outlet. Please consult your camera distributor or the closest Canon Customer Support Help Desk.

• Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. If water or other foreign substances enter the interior, immediately turn the camera power off and remove the camera battery pack or unplug the power cord from the power outlet. Continued use of the equipment may result in fire or electrical shock. Please consult your camera distributor or the closest Canon Customer Support Help Desk.

• Do not use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the equipment. The use of these substances may lead to fire.

• Remove the power cord on a regular periodic basis and wipe away the

dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy environments, the

dust that collects around the plug over long periods of time may become saturated with humidity and short-circuit, leading to fire.

• Do not cut, damage, alter or place heavy items on the power cord.

Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock.

• Do not handle the power cord if your hands are wet. Handling it with wet

hands may lead to electrical shock. When unplugging the cable, ensure that you hold the solid portion of the plug. Pulling on the flexible portion of the cable may damage or exposure the wire and insulation, creating the potential for fires or electrical shocks.

• Use only recommended power accessories. Use of power sources not

expressly recommended for this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards.

• Do not place the battery pack near a heat source or expose it to direct flame or heat. Neither should you immerse it in water. Such exposure may damage the battery pack and lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury.

• Do not attempt to disassemble, alter or apply heat to the battery pack. There is serious risk of injury due to an explosion. Immediately flush with water any area of the body - including the eyes and mouth, or clothing that comes into contact with the inner contents of a battery. If the eyes or mouth contact these substances, immediately flush with water and seek medical assistance.

• Avoid dropping or subjecting the battery pack to severe impacts that could damage the casings. It could lead to leakage and injury.

• Do not short-circuit the battery terminals with metallic objects, such as key holders. It could lead to overheating, burns and other injuries. Use the supplied terminal cover to transport or store the battery pack.

• Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions. Discard the battery pack in specialized waste facilities if available in your area.

• Use only recommended battery pack and accessories. Use of battery pack not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.

• Use the specified battery charger to charge Battery Pack NB-3L. Use of

other chargers may lead to overheating, distortion of the equipment, fire or electrical shock.

• Disconnect the battery charger and compact power adapter from both

the camera and the power outlet after recharging and when they are not in use to avoid fire and other hazards. Continuous use over a long period

may cause a unit to overheat and distort, resulting in fire.

• The battery charger and compact power adapter are designed for exclusive use with your camera. Do not use it with other products or batteries. There is a risk of fire and other hazards.

Caution about magnetic fields

Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera (p. 13). Such items may lose data or stop working.

Cautions

• Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the

batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. Ensure that there is good ventilation when using the battery charger to charge the battery pack.

• Do not store the equipment in humid or dusty areas. Storage in such areas could lead to fire, electrical shock or other damage.

• Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap.

• Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. In

addition, do not touch the surface of the flash after taking several pictures in rapid succession. Either action could result in burns.

• Do not operate the flash with dirt, dust or other items stuck to its lens. The resulting heat build-up could damage the flash.

• Ensure that the battery charger is plugged into a power outlet of the specified rating, not over the specified rating. The plug of the battery charger varies according to region.

• Do not use the battery charger or compact power adapter if the plug or cable is damaged, or if the plug is not fully inserted into the power outlet.

• Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug.

• If your camera is used for prolonged periods, the camera body may become warm. Please take care when operating the camera for extended

periods as your hands may experience a burning sensation.

Preventing Malfunctions

Avoid Strong Magnetic Fields

Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.

Avoid Condensation Related Problems

Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag.

If Condensation Forms Inside the Camera

Stop using the camera immediately if you detect condensation. Continued use may damage the equipment. Remove the SD card and battery pack or compact power adapter from the camera and wait until the moisture evaporates completely before resuming use.

Extended Storage

When not using the camera for extended periods of time, remove the battery pack from the camera or battery charger and store the equipment in a safe place. Storing the camera for extended periods with a battery pack installed will run down the battery pack. However the date, time and other camera settings may reset to default settings if the battery pack has been removed for more than three weeks.

Components Guide

Front View

AF-assist Beam (p. 46)

Microphone (p. 124)

Terminal Cover

DIGITAL Terminal (p. 147)

A/V OUT (Audio/Video output) Terminal (p. 155)

Red-Eye Reduction Lamp (p. 65) Self-timer Lamp (p. 78)

Viewfinder Window (p. 43)

Wrist Strap Mount

Speaker

Flash (p. 64)

Lens

Attaching the Wrist Strap

Components Guide

* When carrying the camera by the strap, be careful not to swing the camera

or catch it on other items.

The interface cable and AV cable cannot be connected simultaneously.

Back View

Tripod Socket

LCD Monitor (p. 36)

Viewfinder Window (p. 43)

Battery Compartment (SD card/battery compartment)

SD Card Slot/ Battery Cover (pp. 22, 24)

DC Coupler Terminal Cover (p. 169)

Operation Panel

Power Button (p. 34)

Indicators (p. 17)

(Print/Share)

Button (p. 18)

Power Lamp

Lights when the power is on or transmission preparations are complete when connected to a computer

Zoom Lever Shooting:

(Wide Angle)/ (Telephoto) (p. 44)

Playback:

(Index) (p. 115)/ (Magnify) (p. 114)

Shutter Button (p. 45)

Mode Dial (p. 16)

MENU Button (p. 49)

FUNC./SET (Function/Set) Button (p. 47)

DISP. (Display) Button (p. 36)

Components Guide

(Metering)

Button

(Flash) Button (p. 64)/

Button

(Continuous) Button

(Self-timer)

(Single Image Erase) Button

Button

(Macro) / (Infinity) Button

Button

Button (p. 94)

(Jump) Button

Button (p. 78)/

(p. 117)

(p. 75)/

(p. 131)/

(p. 70)/

Mode Dial

Use the mode dial to select a shooting or playback function.

To Shoot Still Images (Shooting Mode)

Auto

Manual

Special

Scene Movie Shoots movies with sound (p. 81).

To Play Back Images (Playback Mode)

Playback

Shoots with settings selected by the camera (p. 59).

You select the exposure compensation, white balance or photo effect settings (p. 69).

Effective for shooting in 9 varying conditions (p. 66).

• Play back or delete images from the SD card (pp. 113, 131)

• The lens retracts approximately 1 minute after the mode dial is turned from a shooting mode to playback mode.

• When a printer is connected, images can be printed (see the Direct Print User Guide).

• When a camera is connected, recorded images can be downloaded to and viewed with a computer (p. 146).

When a printer is properly connected, the , or icon appears on the LCD monitor.

Holding the Camera

Images become blurred if the camera moves when the shutter button is pressed. Hold the camera as shown below to avoid camera movement when shooting.

Hold the camera firmly with both hands and let your elbows rest at your sides. Place your finger on the shutter button as you hold the camera.

• Make sure that your hair or fingers do not obstruct the lens, flash, selftimer lamp, microphone or speaker.

• Fix the camera onto a tripod when shooting infinity shots or in dark places.

Indicators

The indicators light or blink when the power button or shutter button is pressed.

Upper Indicator

Green: Ready to shoot Blinking Green:

Orange: Ready to shoot (flash on) Blinking Orange: Ready to shoot (camera shake warning)

Recording to SD card / Reading SD card / Erasing from SD card/Transmitting data (during a computer connection)

Lower Indicator

Yellow: Macro mode / Infinity mode/ AF lock Blinking Yellow: Focusing difficulty (single beep).

Although you can still press the shutter button when the indicator blinks yellow, you are recommended to shoot using the focus lock or AF lock (p. 90).

Components Guide

The following operations are accessible through one easy press of the

(Print/Share) button.

• Printing: See the Direct Print User Guide (supplied with the camera)

• Downloading images: See p.145 of this guide and the Canon Digital Camera Software Starter Guide Disk (supplied with the camera)

The indicator blinks or lights during a printer or computer connection.

Blue: Ready to print/Ready to transfer images Blinking blue: Printing/Transferring

The following cables are used to connect the camera to a computer or printer. Computer (p. 145)

Interface Cable IFC-400PCU (supplied with the camera)

Direct Print Compatible Printers (Sold Separately)

• Compact Photo Printer (SELPHY CP series)/Card Photo Printer

Interface Cable IFC-400PCU (supplied with the camera) or the Interface Cable DIF-100 (supplied with the printer).

• Bubble Jet Printers (PIXMA series/SELPHY DS series)

- PictBridge Compliant Printers:

Interface Cable IFC-400PCU (supplied with the camera)

- Bubble Jet Direct Compatible Printers:

Please refer to your Bubble Jet printer user guide.

• PictBridge Compliant Non-Canon Printers Interface Cable IFC-400PCU (supplied with the camera)

Please refer to the System Map or the Direct Print User Guide supplied with the camera for direct print compatible printer information

Direct

Preparing the Camera

Charging the Battery Pack

Use the following procedures to charge the battery pack the first time you use the camera or when the “Change the battery pack” message displays.

Symbol

Charge Indicator

Insert the battery pack into the

battery charger.

Align the on the battery pack and battery charger and insert it correctly.

Battery charger model names and types

vary by region.

(For CB-2LU)

Plug the battery charger into a power outlet.

(For CB-2LUE)

Attach the power cord to the battery charger and plug it into a power outlet.

• The charge indicator will light red while the battery pack is charging. It will change to green when the charge is complete.

• After charging, unplug the battery charger and immediately remove the battery pack.

Preparing the Camera

To protect the battery pack and prolong its life, do not charge it for longer than 24 hours continuously.

• Since this is a lithium-ion battery pack, you need not completely discharge it before recharging. It can be recharged at any point. However, since the maximum number of charge cycles is approximately 300 times (battery life based on Canon’s testing standards), you are recommended to charge the battery pack after having discharged it completely to prolong battery life.

• It takes approximately 95 minutes to fully charge the battery pack from a fully discharged state (based on Canon’s testing standards). Charging it within a temperature range of 5° to 40 °C (41° to 104 °F) is recommended.

• Charge times may vary according to the ambient temperature and the battery pack’s charge state.

• You may hear a noise during charging. This is not a malfunction.

•See Battery Capacity (Battery Pack NB-3L (Fully charged)) (p. 177).

Battery Pack Handling Precautions

zKeep the battery pack terminals ( ) clean at all times. Dirty

terminals may cause poor contact between the battery pack and camera. Polish the terminals with a soft cotton swab before charging or using the battery pack.

zDo not rapidly overturn or wave the battery charger around when it

contains the battery pack. The battery pack could fly out.

zAt low temperatures, battery pack performance may be reduced and the

low battery icon may appear earlier than usual. Under these conditions, resuscitate the battery pack by warming it in a pocket immediately before use. However, ensure that there are no metallic items in the pocket that could cause a short circuit, such as a key holder, etc.

zDo not place anything, such as tablecloths, carpets, bedding or cushions,

on top of the battery charger while it is charging. Heat will build up and could result in a fire.

zDo not charge batteries other than Battery Pack NB-3L in this charger. zThe battery pack continues to discharge a minimal portion of its power

while installed in the camera, even with the power off, or in the charger. This will shorten battery life.

zDo not allow any metal objects

such as key rings to touch the

Fig. A

Fig. B

and terminals (Fig. A),

as this can damage the battery pack. To carry the battery pack or store it during periods of disuse, always replace the terminal cover (Fig. B).

zEven charged battery packs

continue to discharge naturally. You are advised to charge the battery on the day of use, or one day before, to ensure a full charge.

zSince storing a fully charged battery pack for long periods of time (about

one year) may shorten its life cycle or affect its performance, you are recommended to use it in the camera until it is completely discharged and to store it in an indoor location with low relative humidity and between the temperatures of 0 to 30 °C (32 to 86 °F). If you do not use the battery pack for long periods of time, charge it fully and discharge it fully in the camera about once a year before returning it to storage.

zIf the performance of the battery pack diminishes substantially even when it

is fully charged, its life has been exceeded and it should be replaced.

Preparing the Camera

Installing the Battery Pack

Install Battery Pack NB-3L (supplied).

Please recharge the battery pack (p. 19) time.

Slide the SD card slot/battery cover

in the direction of the arrows.

Press the battery lock while

Battery Lock

inserting the battery pack all the way in until the lock clicks.

Align the on the battery pack and battery chamber and insert it correctly.

To remove the battery pack, press the battery lock in the direction of the arrow and

Symbol

hold it while pulling the battery pack out.

Slide the SD card slot/battery cover

closed.

before you use it for the first

• Please watch the loading slot area carefully as you insert and remove the battery pack.

• Do not turn off the power or open the SD card slot/battery cover while the indicator blinks green. The camera is writing, reading, erasing or transmitting an image to or from the SD card.

• Remove the battery pack when the camera is not in use. Please note, however, that the date, time and other camera settings may be lost if the battery pack has been removed for more than three weeks.

Please use an AC Adapter Kit ACK900 (sold separately) for extended use of the camera (p. 169).

Battery Pack Charge

The following icons and messages will display when the battery pack charge is low.

Battery pack charge is low. Recharge it as soon as possible before it is required for an extended period. When the LCD monitor is off, this icon will display when you press any button other than the power or (Print/Share) button.

Change the battery pack

See Battery Capacity (Battery Pack NB-3L (Fully charged)) (p. 177).

Battery charge is insufficient to operate the camera. Replace the battery pack immediately.

Preparing the Camera

Installing the SD Card

Write-Protect Tab

The SD card has a write-protect tab. Sliding the tab downward prevents recording of data and protects existing data (e.g. images). When recording to, erasing from or formatting the SD card, slide the tab upward.

Write-Protect Tab

Writing/Erasing Possible Writing/Erasing Impossible

Ensure that the SD card is correctly oriented before inserting it in the camera. It may damage the camera if inserted backward by mistake.

Turn the camera power off and insert the SD card with the following procedures.

Slide the SD card slot/battery cover

in the direction of the arrows.

Insert the SD card.

• Push it according to the diagram on the SD card slot/battery cover until it clicks into place.

• Do not touch or allow metal objects to contact the terminals on the back of the SD card.

Back

Slide the SD card slot/battery cover

closed.

To Remove the SD card

Push in the SD card until you hear it click, then release it.

• Please watch the loading slot area carefully as you insert and remove the SD card.

• Since the camera is writing, reading, erasing or transmitting data to or from the SD card when the indicator blinks green, never perform the following actions during this time. It could corrupt the image data.

- Subject the camera body to vibration or shocks.

- Turn the camera’s power off, or open the SD card slot/battery

cover.

• Please note that SD cards formatted with other manufacturers’ cameras or a computer, or formatted or edited with application programs, may slow down writing to the SD card or may not operate correctly in the camera.

• You are recommended to use SD cards that have been formatted in your camera (p. 26). The card supplied with the camera may be used without further formatting.

See SD Cards and Estimated Capacities (p. 178).

Preparing the Camera

Formatting SD Cards

You should always format a new SD card or one from which you wish to erase all images and other data.

Please note that formatting (initializing) an SD card erases all data, including protected images and other file types.

Power Lamp

Press the power button until the

power lamp lights green.

Press the MENU button.

The (Rec.) or (Play) menu is displayed.

Use the button to select the

(Set up) menu.

Use the or button to select

[Format] and press the FUNC./SET button.

Use the button to select [OK] and

press the FUNC./SET button.

• To perform a low level format, use the button to select [Low Level Format] and the or button to add a check mark.

• To exit instead of formatting, select [Cancel].

• If [Low Level Format] is selected, you can stop formatting partway by pressing the FUNC./SET button. You can still use the SD card without problem even if formatting was halted partway.

• The capacity of the SD card displayed after formatting will be less than the rated capacity of the SD card. This is not a malfunction of the SD card or camera.

• Low Level Format

You should select the Low Level Format option if you suspect the read/write speed of an SD card has dropped or if you wish to completely erase its data. A low level format may require 2 to 3 minutes with some SD cards.

• When the camera is malfunctioning, a corrupted SD card might be the cause. Reformatting the SD card may solve the problem.

• When a non-Canon brand SD card is malfunctioning, reformatting it may solve the problem.

• SD cards formatted in other cameras, computers, or peripheral devices may not operate correctly in this camera. When that happens, reformat the SD card with this camera. If formatting in the camera does not work properly, turn the camera off and re-insert the SD card. Then turn the camera back on and format again.

Preparing the Camera

SD Card Handling Precautions

zSD cards are high-precision electronic devices. Do not bend them, apply

force to them, or subject them to shocks or vibration.

zDo not attempt to disassemble or alter the SD card. zDo not allow dirt, water or foreign objects to contact the terminals on the

back of the card. Do not touch the terminals with your hands or metal objects.

zDo not peel away the original label on the SD card or cover it with another

label or sticker.

zWhen writing on the SD card, use a soft point pen (e.g. felt-tip pen). Using

a sharp point pen (e.g. ball-point pen) or pencil may damage the SD card or corrupt the recorded data.

zSince some or all of the data recorded on the SD card may be corrupted or

erased by electrical noise, static electricity or card malfunction, making a backup copy of important data is recommended.

zMoving an SD card rapidly between temperature extremes will cause

condensation to form in the card and lead to a malfunction. To avoid condensation, place the SD card in a sealed plastic bag before moving it into a different temperature zone and allow it to adjust slowly to the new temperature.

zIf condensation forms on the SD card, store it at room temperature until the

water droplets have evaporated naturally.

zDo not use or store SD cards in the following locations.

- Locations subject to dust or sand

- Locations subject to high humidity and high temperatures

Precaution for Multi Media Cards

This camera is designed to perform optimally when used with genuine Canon-brand SD cards. You may use multi media cards with this camera. However, Canon makes no warranties concerning the use of multi media cards.

+ 166 hidden pages