Candy CAFB2000 019 User Manual

USER MANUAL (GB) ..............................P 01

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ (RU)

.....P 04

M

L*

G*

F*

E

I*

S

P

T*

H*

K

U*

J

B

A

C

V*

Q

PRINTED IN P.R.C.

48030486

1

D

S

N**

O

R

W*

* Certain models only ** Nozzle design may vary according to model

2 3 4 5

14 15 16 17

6* 7 8 9*

*

10

11 12 13

18 19 20 21

22 23

* Certain models only

GB

INSTRUCTIONS FOR SAFE USE

This appliance should only be used for domestic cleaning, as described in this user guide.
Please ensure that this guide is fully understood before operating the appliance.

Do not leave the appliance plugged in. Always switch off and remove the plug from the socket
after use, or before cleaning the appliance or any maintenance task.

This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.

If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard,
an authorised Candy service engineer must replace the power cord.

Keep hands, feet, loose clothing and hair away from rotating brushes.

Use only attachments, consumables or spares recommended or supplied by Candy.

Static electricity: some carpets can cause a small build up of static electricity. Any static
discharge is not hazardous to health.

Do not use your appliance out of doors or on any wet surface or for wet pick up.

Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.

Do not spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours.

Do not run over the power cord when using your appliance or remove the plug by pulling on
the power cord.

Do not continue to use your appliance if it appears faulty.

Candy service: To ensure the continued safe and efficient operation of this appliance we
recommend that any servicing or repairs are only carried out by an authorised Candy service
engineer.

Do not stand on or wrap the cord around arms or legs when using your appliance.

Do not use the appliance to clean animals or people.

Do not position the appliance above you when cleaning the stairs.

GETTING TO KNOW YOUR CLEANER

A. Main Cleaner
B. Cord Rewind Pedal
C. Carry Handle
D. Exhaust Filter Cover
E. On/Off Pedal
F. Telescopic Tube*
G. Telescopic Tube Release Button*
H. Standard Tube*
I. Variable Power Control Roller*
J. Bag Check Indicator
K. Bag Door Release Latch

L. Suction Regulator*
M. Handle
N. Carpet and Floor Nozzle**
O. Surface selector Pedal
P. Hose
Q. Pre motor filter
R. Exhaust filter
S. 2 in 1 Tool
T. Pet Hair Remover Mini Turbo Nozzle*
U. Allergen Remover Mini Turbo Nozzle*
V. Grand Turbo Nozzle*
W. Hard Floor Caresse Nozzle*

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.

1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To

release: simply press the two buttons on the hose end and pull [2].

2. Connect the tube upper end to the handle. [3].

3. Connect the tube lower end to the carpet and floor nozzle [4].

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the red

marker [5].

2. Adjust the length of the telescopic tube* by moving the telescopic release button* up and

raise or lower the handle to the most comfortable cleaning position [6].

3. Carpet & Floor Nozzle. Press the pedal on the nozzle [7] to select the ideal cleaning mode

for the floor type.

Hard Floor: The brushes are lowered to protect the floor
Carpet: With lifted brushes for the deepest clean

4. Switch the cleaner on by pressing the On/Off pedal on the cleaner main body. [8]

5. Adjust the power level by rotating the variable power control roller*. [9]

6. Adjust the suction regulator* to the desired level. [10].

7. Switch off at the end of use by pressing the On/Off pedal. Unplug and press the cord rewind

pedal to wind the power cord back into the cleaner [11].

8. Parking and Storage - The tube can be parked for temporary storage while in use, or in the

storage position when not in use [12].

1

**Nozzle design may vary according to model

*Certain models only