Campbell Hausfeld MXS21003 User Manual
Pressure Blaster with Steel Hopper
Sableuse à Pression avec Trémie d’Acier
Chorreadora de Presión con Tolva de Acero
Description
Maxus blasting equipment is designed for cleaning and
removing rust, scale, paint, grime and dirt. It is the ideal
method for stripping, polishing and etching projects. This
equipment can be used with abrasive powders and liquids.
This model is equipped with the standard use ceramic nozzle.
Description
L’équipement de décapage Maxus est conçu pour nettoyer et
enlever la rouille, les écailles, la peinture, la crasse et la saleté.
C’est la méthode idéale pour le dégarnissage, le polissage et
le décapage. Cet équipement peut être utilisé avec le sable,
les poudres abrasives, l’eau et autres liquides. Ce modèle est
équipé d’une buse céramique standarde.
Descripción
El equipo de chorreado Maxus está concebido para limpiar y
quitar óxido, escamas, pintura, suciedad y mugre. Es un método ideal para desencofrar, pulir y grabar al agua fuerte. Esta
unidad se puede utilizar con arena, polvos abrasivos, agua y
otros líquidos. Este modelo está equipado con una boquiilla
jestándard de cerámica.
Specifications, Assembly Instructions, and Replacement Parts List
Spécifications, Instructions de Montage et Liste de Pièces de Rechange MXS21002, MXS21003
Especificaciones, Instrucciones para Ensamblaje y Lista de Repuestos
IN708602AV 8/08
© 2008
Spécifications EspecificacionesSpecifications
Nozzle Material . . . . . . . . . . . Ceramic
Hopper Cap. (lbs) . . . . . . . . 80 or 120
Max. psi . . . . . . . . . . . . . . . . . . . . .125
CFM Required @ 90 psi
(based on continuous use)
3/32 inch nozzle . . . . . . . . . . . . . . . 9
7/64 inch nozzle . . . . . . . . . . . . . . 11
1/8 inch nozzle . . . . . . . . . . . . . . . 13
9/64 inch nozzle . . . . . . . . . . . . . . 18
Air Inlet (NPT) . . . . . . . . . . . . 1/4 inch
Minimum Hose Size . . . . . . . . 3/8 inch
Matériel de Buse . . . . . . . Céramique
Capacité de la
Trémie (Kg) . . . . . . . . . 36,29 ou 54,43
PSI Maximale . . . . . . . . . . . . . 862 kPa
Pi
3
/min. (CFM) requis @ 621 kPa
(basé sur le fonctionnement continu)
buse de 2,0 mm (3/32 po) . . . . . . . 9
buse de 2,5 mm (7/64 po) . . . . . . 11
buse de 3,0 mm (1/8 po) . . . . . . . 13
buse de 3,5 mm (9/64 po) . . . . . . 18
Arrivée d’air (NPT) . . . . . . . . . . 1/4 po
(6,4 mm)
Taille de Tuyau Minimum . . . . 3/8 po
(9,5 mm)
Material de la boquilla . . . . Cerámica
Capacidad de la
tolva (Kg) . . . . . . . . . . . 36,29 ó 54,43
Presión Máxima (bar) . . . . . . . . . 8,62
Pies
3
/min. (CFM) requeridos @ 6,21 bar
(basado en uso continuo)
boquilla de 2,0 mm (3/32 inch) . . . 9
boquilla de 2,5 mm (7/64 inch) . . 11
boquilla de 3,0 mm (1/8 inch) . . . 13
boquilla de 3,5 mm (9/64 inch) . . 18
Entrada de aire (NPT). . . . . . . 6,4 mm
(1/4 inch)
Diámetro mínimo de la
Manguera. . . . . . . . . . . . . . . . . 9,5 mm
(3/8 inch)
For parts, product & service information
visit www.maxustools.com
2
Specifications, Assembly Instructions, and Replacement Parts List
Address parts correspondence to:
Attn: Customer Service
100 Production Drive
Harrison, OH 45030 U.S.A.
Please provide following information:
- Model number
- Stamped-in code
- Part description and number as shown in parts list
1
20
22
21
20
19
18
17
16
15
14
13a & 13b
12
11
10
9
8
7
6
5
4
3
2
4
4
7
7
23
22
21
21
18
21
24
25
25
26
For replacement parts or technical assistance,
call 1-888-Maxus4U (1-888-629-8748)
www.maxustools.com
Replacement Parts List
3
Model MXS21002 and MXS21003
1 Tee handle w/ seal SV609800AV 1
2 Tank Handle SV609900AV 1
3 Tank N/A 1
4 Cotter pin - M4 x 40mm 3
5 Pressure gauge SV253600AV 1
6 Safety valve V- 215406AV 1
7 Brass nipple N/A 5
8 Air Manifold SV253800AV 1
9 Hex nut - M6 2
10 Flat Washer - M6 2
11 Screw - M6 x 30 2
12 Filter PA212103AV 1
13a Air hose, for 120 lb. tank SV610200AV 1
13b Air hose, for 80 lb. tank SV610201AV 1
14 Ball valve (blue handle) SV254000AV 1
15 Brass nipple SV254100AV 1
16 Hex bolt - M8 x 10 4
Ref.
No. Description Part Number Qty
17 Tank foot SV610300AV 1
18 Ball valve (red handle) SV254200AV 2
19 Material manifold SV254300AV 1
20 Axle bracket SV610400AV 2
21 Flat Washer 1
22 Wheel SV253700AV 2
23 Axle SV254400AV 1
24 8 foot hose SV942000AV 1
25 Hose clamp 2
26 Replacement pressure
feed blast gun MXS40004AV 1
Standard hardware item - available at your local
hardware store
Ref.
No. Description Part Number Qty
Assembly
Tools needed for Assembly:
1. Two 8 inch crescent wrenches
2. Phillips head screwdriver
3. Flat head screwdriver
4. Needle nose pliers
5. 14 mm wrench
6. Rubber mallet
Check package to make sure nothing is
missing.
To assemble correctly, use the following instructions:
1. Turn the tank (3) up side down.
2. Attach the axle brackets (20) to the
tank using the M8 bolts (16) and
the 14 mm wrench.
3. Slide the axle (23) thru the axle
brackets.
4. Slide flat washer (21) onto each end
of the axle.
5. Slide a wheel (22) onto each end of
the axle.
6. Slide flat washer (21) onto each end
of the axle.
7. Insert cotter pin (4) thru the hole in
the axle and bend pin using needle
nose pliers.
8. Using the rubber mallet, hammer
the tank foot (17) to the tank and
aligning the holes.
9. Insert cotter pin (4) into the tank
foot hole and bend pin using needle nose pliers.
10. Attach the blast gun (A) to the
material hose (24) using the crescent wrenches.
11. Attach the other end of the material hose (24) to material manifold
(19) an d secure using clamp (26)
with a flat head screwdriver.
12. Turn the tank assembly right side
up and set unit on the wheels and
tank foot.
13. Slide the tee-handle (1) into the
tank.
14. Mount tank handle (2) to tank
using nut (9), flat washer (10) screw
(11), crescent wrench and Phillips
screwdriver.
www.maxustools.com
Loading...