DOOR ACTIVATION DEVICES
RF TRANSMITTERS & RECEIVERS
900 MHz. No-Battery Wireless
Door Control System
The New Wireless Superpower
Wireless Signal Powered by Pushing the Switch!
Kinetic by Camden™ is an advanced
900 MHz. ‘power harvesting’ wireless system that uses the energy created by the operation of the switch to power the wireless transmitter. Kinetic by Camden™ avoids the need to provide power or batteries, saving installation and maintenance costs.
Kinetic by Camden™ is the only ‘power harvesting’ wireless system to feature an ultra-compact receiver (easily installed in automatic door operator cabinets), with field selectable momentary, delayed or latching relay operation, and range adjustability.
ADVANCED
TECHNOLOGY
Features
•Huge Savings in Installation and
Maintenance Costs.
•Battery-less Switch Operation.
•No-Battery Maintenance.
•Environmentally Friendly - Eliminates the
Disposal of Batteries.
•Smooth Switch Operation, ADA Compliant Activation, Using 3.4 lbs Force Maximum.
•Advanced CM-RX-90V2 Wireless Receiver is Compatible with both Lazerpoint RF™ and Kinetic by Camden™ Wireless Systems, Switch Selectable.
•No-Battery Wireless Transmitter may be ordered as part of Camden CM-35, CM-40, CM-45, CM-46 and CM-60 Series Push Plate Switches.
•Compact Design Fits Standard Depth Mounting Boxes.
ROHS |
Compliant |
COMPLIANT |
Kinetic by Camden™ |
Product Specification Sheets |
Applications
Kinetic by Camden™ No-battery Wireless Systems are compatible with all brands of automatic door operators and are designed to provide reliable door activation in any commercial, industrial or institutional application.
Kinetic by Camden™ No-battery Wireless Systems are designed for indoor or outdoor applications. For switches directly exposed to rain or snow, a water tight switch option is recommended.
SPECIFICATIONS
Push Plate Switch and No-Battery Transmitter
WIRELESS FREQUENCY |
900 MHz. Fixed Frequency |
RANGE: |
|
Open Air |
Up to 300 ft. |
Within Operator Header |
Up to 70 ft. |
TEMPERATURE RATING |
-40°F to 185°F (-40°C to +85°C) |
WATER TIGHT OPTION |
Yes |
DIMENSION |
1-1/2" (38mm) Box Depth Required |
CM-RX-90V2 Receiver
VOLTAGE |
12/24V, AC/DC |
|
RESPONSE TIME |
3 |
- 200ms |
LEDS |
Relay Status, Learn/Erase Mode, Signal Strength |
|
|
Adjust Mode, and Time Setting |
|
OUTPUTS |
(1) SPDT Relay, 2 Modes Delay and No Delay |
|
CONTACT RATING |
3 Amps @ 30V DC |
|
OPERATING TIME |
1 |
- 30 seconds |
DELAY TIME |
1 |
- 15 seconds |
TEMPERATURE RATING |
-40°F to -185°F (-40°C to +85°C) |
|
DIMENSION |
3-3/8"H x 1-1/2"W x 13/16"D (85mm x 38mm x 21mm) |
ORDERING INFORMATION
Kinetic Switch Models
|
|
|
|
|
|
CM-35K |
CM-45K |
CM-46K |
CM-46CBK |
CM-40K |
CM-60K |
2" x 4" Rectangle |
4-1/2" Square |
4-1/2" Square |
4-1/2" Square Blue Finish |
4-1/2" |
6" |
Push Plate Switch with |
Push Plate Switch with |
Exposed Screws, Push Plate |
Exposed Screws, Push Plate |
Round Push Plate |
Round Push Plate |
Kinetic Wireless Transmitter |
Kinetic Wireless Transmitter |
Switch with |
Switch with |
Switch with |
Switch with |
Compatible with CM-34BL |
Compatible with CM-43CBL |
Kinetic Wireless Transmitter |
Kinetic Wireless Transmitter |
Kinetic Wireless Transmitter |
Kinetic Wireless Transmitter |
Surface Box |
Surface Box |
Compatible with CM-43CBL |
Compatible with CM-43CBL |
|
|
|
|
Surface Box |
Surface Box |
|
|
|
|
|
|
|
|
CM-RX-90V2 RECEIVER
|
|
RX-90 |
|
|
|
|
ver 2.0 |
|
|
POT1 |
|
OP TIME |
|
|
|
LATCH |
3-3/8” |
|
|
21 |
ON |
DIP 1 |
(85mm) |
|
|
|
DIP 2 |
|
|
PB1 |
|
|
NC |
|
|
PB1 |
COM |
|
|
|
|
|
||
|
|
|
NO |
|
|
|
12/24V |
|
|
|
|
AC/DC |
|
|
|
|
1-1/2” |
13/16” |
|
|
|
(21mm) |
||
|
|
(38mm) |
|
|
FRONT VIEW |
SIDE VIEW |
CM-45/46: PUSH PLATE SWITCH
1-3/16”
(30mm)
1-3/8”
(36mm)
5/8”
(17mm)
BACK VIEW |
SIDE VIEW |
|
|
|
|
Kinetic by Camden™ |
Product Specification Sheets |
|
|
|