Brother PTP710BTXG1 User Manual

User’s Guide P330BT

User’s Guide (English)

Thank you for purchasing model P300BT, the P-TOUCH CUBE!

User’s Guide (English)

Please read this guide, including all Precautions, before using this Machine. After reading
this guide, keep it in a safe place.
With your machine, you can create a wide variety of custom, self-adhesive labels. This
labeller uses Brother “TZe” tapes from 3.5 to 12 mm widths. “TZe” tape cassettes are
available in many colours and sizes. Visit www.brother.com
compatible with your machine.

NOTE

• The information provided in this document is subject to change without notice.

• Unauthorised duplication or reproduction of any or all content of this document is
prohibited.

• Although this document has been written with extreme care, if you notice something
questionable or incorrect, please contact Brother.

• Please note that we cannot assume any responsibility for any damage or losses arising from
the use of this label printer or labels created with the label printer, or the disappearance or
change of data due to failure, repair, loss of power, or any claim from a third party.

For FAQs, Troubleshooting, and to download software and manuals, visit
support.brother.com

for a complete list of tapes

Safety Precautions

WARNING

CAUTION

Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injuries.

Follow these guidelines to avoid the risk of fire, burns, injury, electrical shocks,
rupture, overheating, abnormal odours or smoke.

• Always use the specified voltage and AC Adapter (AD-24ES) for your machine to prevent any
damage or failure.

• Do not touch your machine during a thunderstorm.

• Do not use your machine or AC Adapter in places of high humidity such as bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage your machine, power cord or plug.
Do not forcibly bend or pull the power cord. Always hold the AC Adapter when disconnecting
from the electrical socket.

• Make sure that the plug is fully inserted in the electrical socket. Do not use an outlet that is
loose.

• Do not allow your machine, AC Adapter, power plug, or batteries to get wet, for example, by
handling them with wet hands or spilling beverages on them.

• Do not disassemble or modify your machine, AC Adapter, or batteries.

• Do not allow a metal object to touch the plus and minus ends of a battery.

• Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries.

• Do not throw the batteries into fire or expose to heat.

• Disconnect the AC Adapter, remove batteries immediately and stop using your machine if you
notice abnormal odour, heat, discolouration, deformation or anything unusual while using or
storing it.

• Do not use a damaged or leaking battery as the fluid may get on your hands.

• Do not use a deformed or leaking battery or one whose label is damaged. There is a possibility
of damaging your machine.

• Since loss of eyesight may result if leaked fluid from batteries gets into your eyes, immediately
rinse your eyes with a large amount of clean water, and then seek medical attention.

Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injuries.

Follow these guidelines to avoid personal injury, liquid leakage, burns, or heat.

• When your machine is not being used, store it out of the reach of children. In addition, do not
allow children to put any label printer parts or labels in their mouths. If any object has been
swallowed, seek medical attention.

• Do not touch metal parts around the Print Head immediately after printing.

• Do not touch the cutter blade.

• If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with clean
water.

• Remove the batteries and disconnect the AC Adapter if you do not intend to use your machine.

• Do not use any batteries other than those specified. Do not use combinations of old and new
batteries or combinations of different types, different charging levels, different manufacturers,
or different models. Do not insert a battery with its plus and minus ends reversed.

• Do not drop or hit your machine or AC Adapter.

• Do not put your finger inside your machine when you close the Cassette Cover and the Battery
Cover.

• Before using Ni-MH rechargeable batteries, carefully read the instructions for the batteries and
battery charger, and be sure to use them correctly.

• If using Ni-MH rechargeable batteries, charge the batteries with a specialised battery charger
before using the batteries.

• Do not put your finger inside the Tape Exit Slot. You could be injured by the cutter blade.

• Make sure you use only 6×AAA Alkaline Batteries or rechargeable 6×AAA Ni-MH batteries.

General Precautions

• Depending on the location, material, and environmental conditions, the label may unpeel
or become irremovable, the colour of the label may change or be transferred to other
objects. Before applying the label, check the environmental conditions and the material.

• Do not use your machine in any way or for any purpose not described in this guide. Doing
so may result in accidents or damage to your machine.

• Use only Brother TZe Tape Cassettes with your machine. Do not use tapes that do not
have the mark.

• Only use a soft, dry cloth to clean your machine; never use alcohol or other organic
solvents.

• Use a soft wipe to clean the Print Head; never touch the Print Head with your fingers.

• Do not put any foreign objects into the Tape Exit Slot, the AC Adapter connector or battery
compartment, etc.

• Do not place your machine, AC Adapter, or batteries in direct sunlight or rain, near heaters
or other hot appliances, in any location exposed to extremely high or low temperatures (for
example, on the dashboard or in the back of your car), high humidity, or in dusty locations.

• Do not try to print if the cassette is empty; it will damage the Print Head.

• Do not pull the tape while printing or feeding; it will damage the tape and your machine.

• Your machine is not equipped with a charging feature for rechargeable batteries.

• The length of the printed label may differ from the displayed label length on your mobile
device.

• When printing multiple copies of a label, the label printer will not detect the end of the tape
cassette and will continue operating.

• Printed characters may look different than previewed on your device, as your device's
screen may have a higher resolution than the printer.

• Printed small text may not be as clear as it is displayed on your device.

• White and Gold text may not print clearly if you use thin characters.

Trademarks and Copyrights

BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd.
P-TOUCH is a trademark or registered trademark of Brother Industries, Ltd.
© 2016 Brother Industries, Ltd. All rights reserved.
Google Play and Android are registered trademarks of Google Inc.
Apple, Macintosh, Mac OS, iPhone, iPad and iPod are trademarks of Apple Inc., registered
in the United States and other countries.
The names of other software or products used in this document are trademarks or registered
trademarks of the respective companies that developed them.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by Brother Industries, Ltd. under license.
Each company whose software title is mentioned in this manual has a Software License
Agreement specific to its proprietary programs.
Any trade names and product names of companies appearing on Brother products, related
documents and any other materials are all trademarks or registered trademarks of those
respective companies.

Declaration of Conformity (Europe/Turkey only)

We, Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561 Japan

declare that this product and AC adapter are in conformity with the essential requirements
of all relevant directives and regulations applied within the European Community.

The Declaration of Conformity (DoC) can be downloaded from the Brother Solutions Center.
Visit support.brother.com

• select “Europe”

• select your country

• select “Manuals”

• select your model

• select “Declaration of Conformity”

• click “Download”

Your Declaration will be downloaded as a PDF file.

and:

Declaration of Conformity for R&TTE Directive 1999/5/EC

(Europe/Turkey only)

We, Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561 Japan

declare that these products are in conformity with the provisions of the R&TTE Directive
1999/5/EC. A copy of the Declaration of Conformity can be downloaded by following the
instructions in the Declaration of Conformity (Europe/Turkey only) section.

Information for compliance with Commission Regulation 801/2013

P300BT

Power consumption* 0.66W

* All network ports activated and connected.

How to enable/disable Bluetooth

To activate the Bluetooth function:
Press the Power Button to power on your machine, Bluetooth will be turned on.
To deactivate the Bluetooth function:
Press and hold the Power Button for 0.5 seconds to power off your machine, Bluetooth will be
turned off.

Bluetooth

This printer supports Bluetooth.
Frequency band(s): 2400 - 2483.5 MHz.
Maximum radio-frequency power transmitted in the frequency band(s): Less than

20 dBm(e.i.r.p).

Performing Routine Maintenance

NOTE

Before performing any maintenance, power off your machine. if you use batteries,
remove them and if you are using the AC Adapter, unplug it.

Cleaning your machine case

Wipe the case with a soft, dry cloth to remove dirt or dust. If the case is heavily soiled, wipe
it with a cloth dampened with some water.

NOTE

Do not use solvents or agents such as benzene, paint thinner, or alcohol, which may
damage your machine's surface.

Cleaning the Print Head

Dirt on the Print Head may cause blank lines, faint type, or missing characters.
Use an optional dedicated head cleaning cassette (TZe-CL3) or use a cotton swab to gently

wipe dirt from the Print Head.

WARNING

DO NOT TOUCH the Print Head. It is very hot and you may get burned.