Brother HL-5350DN User Manual

Quick Setup Guide

(EU only)

Start Here

Before you can use the printer, read this Quick Setup Guide for the correct setup and installation. To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com

HL-5340D/HL-5350DN

IMPORTANT

DO NOT connect the interface cable yet.

Unpack the printer and check the components

a Front Cover Release Button b Control Panel c Face-down Output Tray

Support Flap 1 (Support Flap 1)

d Front Cover e Paper Tray f Power Switch g Face-down Output Tray

Support Flap 2 (Support Flap 2)

h Face-down Output Tray i Multi-purpose Tray (MP Tray)

CD-ROM

(including User's Guide and

Network User's Guide)

Quick Setup Guide

Drum Unit and Toner

Cartridge Assembly

AC Power Cord

WARNING

Plastic bags are used in the packaging of your printer. To avoid danger of suffocation, please keep these bags away from babies and children.

Note

• Save all packing materials and the box in case for any reason you must ship your printer.

• The interface cable is not a standard accessory. Buy the appropriate interface cable for the interface you want to use (USB, Parallel or Network).

USB cable

• Please make sure you use a USB 2.0 interface (Type A/B) cable that is no longer than 6 feet (2.0 meters).

• When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB port on a keyboard or non-powered USB hub.

Parallel cable

DO NOT use a parallel interface cable that is longer than 6 feet (2.0 meters).Use a shielded interface cable that is IEEE 1284-compliant.

Network cable (For HL-5350DN)

Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.

EEU-ENG Version 1

Note

Keep a minimum gap around the printer as shown in the illustration.

100mm(4 in.)

100mm (4 in.)

Symbols used in this guide

100mm (4 in.)

130mm (5.12 in.)

WARNING

CAUTION

IMPORTANT

Note

User's Guide Network User's Guide

Install the drum unit and

toner cartridge assembly

WARNINGS tell you what to do to prevent possible personal injury.

CAUTIONS specify procedures you must follow or avoid to prevent possible minor

injuries.

IMPORTANT specify procedures you must follow or avoid to prevent possible damage

to the printer or other objects.

Electrical Hazard icons alert you to a possible electrical shock.

Hot Surface icons warn you not to touch machine parts that are hot.

Notes tell you how you should respond to a situation that may arise or give tips about how the current operation works with other features.

Indicates reference to the User's Guide or Network User's Guide which is on the

CD-ROM we have supplied.

b Press the front cover release button and open

the front cover a.

IMPORTANT

DO NOT connect the interface cable yet.

a Remove the packing tape from the outside of

the printer.

c Unpack the drum unit and toner cartridge

assembly.

d Gently shake it from side to side several times

to distribute the toner evenly inside the assembly.

b While pressing the blue paper-guide release

lever a, slide the paper guides to fit the paper size you are loading in the tray. Make sure that the guides are firmly in the slots.

e Put the drum unit and toner cartridge assembly

into the printer until it clicks into place.

f Close the front cover of the printer.

Load paper in the paper

tray

a Pull the paper tray completely out of the printer.

c Fan the stack of paper well to avoid paper jams

and misfeeds.

d Put paper in the tray, and make sure that the

paper is below the maximum paper mark a. The side to be printed on must be face down.

IMPORTANT

Make sure the paper guides touch the sides of the paper so it will feed properly.

e Put the paper tray firmly back in the printer.

Make sure that it is completely inserted into the printer.

Print a test page

IMPORTANT

DO NOT connect the interface cable yet.

e Press Go. The printer prints a test page. Check

that the test page has printed correctly.

a Make sure that the printer power switch is off.

Connect the AC power cord to the printer.

b Turn on the printer power switch. c Unfold support flap1.

Note

This function will not be available after the first print job you send from your computer.

Now go to

Go to the next page to install the printer driver.

d After the printer has finished warming up, the

Status LED stops blinking and stays green.

Choose your connection type

For USB interface cable

Windows®, go to page 6 Macintosh, go to page 8

For Parallel interface cable

Windows®, go to page 9

Windows

USB

Macintosh

Windows

Parallel Wired Network

For Wired Network

Windows®, go to page 11 Macintosh, go to page 15

Windows

Macintosh

USB

For USB Interface Cable Users

Install the printer driver

IMPORTANT

DO NOT connect the USB interface cable yet.

Note

If the Found New Hardware Wizard appears on your computer, click Cancel.

and connect the printer to your computer

Windows

d Put the supplied CD-ROM into your CD-ROM

drive. The opening screen will appear automatically. Choose your printer model and the language.

e Click Install Printer Driver on the menu

screen.

f Click USB cable users.

a Turn off the printer power switch. b Make sure the USB interface cable is NOT

connected to the printer, and then begin installing the printer driver. If you have already connected the cable, remove it.

Note

• For Windows Vista®, when the User Account Control screen appears, click Continue.

• If you want to install the PS driver (Brother’s BR-Script Driver), choose Custom setup and then follow the on-screen instructions. When the Select Components screen appears, check PS (PostScript Emulation) Driver, and then continue following the on-screen instructions.

g When the License Agreement window

appears, click Yes if you agree to the License Agreement.

h Remove the label covering the USB interface

connector.

c Turn on your computer. (You must be logged

on with Administrator rights.)

USB

i When this screen appears, make sure the

printer power switch is on. Connect the USB cable to the USB connector marked with a symbol, and then connect the cable to the computer. Click Next.

Windows

USB

Macintosh

j Click Finish.

Note

• If you want to register your product on-line, check On-Line Registration.

• If you do not want to set your printer as Default printer, uncheck Set as Default Printer.

• If you want to disable the Status Monitor, uncheck Enable Status Monitor.

The installation is now

Finish

Note

XML Paper Specification Printer Driver

The XML Paper Specification Printer Driver is the most suitable driver when printing from the applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at http://solutions.brother.com/

complete.

For USB Interface Cable Users

MacintoshUSB

Connect the printer to your Macintosh and

install the driver

a Remove the label covering the USB interface

connector.

b Connect the USB cable to the USB connector

marked with a symbol, and then connect the cable to your Macintosh.

f Click Install Printer Driver on the menu

screen.

g Click USB cable users and follow the

on-screen instructions. Then, restart your Macintosh.

Note

Please see the User’s Guide on the CD-ROM to install the PS driver (Brother’s BR-Script Driver).

h The Brother software will search for the Brother

printer. During this time the following screen will appear.

IMPORTANT

DO NOT connect the printer to a USB port on a keyboard or a non-powered USB hub.

c Make sure the printer power switch is on. d Turn on your Macintosh. Put the supplied CD-

ROM into your CD-ROM drive.

e Double-click the HL5300 icon on your desktop.

Double-click the Start Here icon. Follow the on-screen instructions.

i Choose the printer you wish to connect, and

then click OK.

j When this screen appears, click OK

The installation is now

Finish

complete.

+ 17 hidden pages