Brother HL-4000CN Installation Guide

Hub

OFF ON

Enter your unique port name (ex. BLP1), and then click the OK button.

Select “LPR (Recommended),” and then click the Next button.

Step 5 Connect the Printer to Your Network

and Install the Driver

Step 6 Configuring the NetBIOS Port

Step 6 Select the Appropriate Printer Queue or

‘Sharename’

Step 6 Configuring the LPR Port

For Windows

95/98/Me Users Only

For Windows NT

4.0 Users Only

For Windows

2000 Users Only

For Windows® XP Users Only

Specify your printer’s IP Address (or click the Browse button to see a list of printers), and then click the OK button.

Click the Finish button to restart your PC.

After your PC has restarted, setup will be complete.

Enter your unique port name (ex. BNT1), and then click the OK button.

Enter the path name (or click the Browse... button to see a list of printers), and then click the OK button.

Click the Finish button to restart your PC.

After your PC has restarted, setup will be complete.

Select “NetBIOS,” and then click the Next button.

For Brother Peer-to-Peer Network Printer Users (LPR- Recommended Peer-to-Peer Printing Method)

For Brother Peer-to-Peer Network Printer Users (NetBIOS)

Steps 1 to 4 Follow these steps in the Quick Setup

Guide first.

For All Network Users

For Network Shared Printer Users

Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the instructions on the screen.

Turn on the printer power switch.

Turn off the printer power switch.

Select your printer’s queue, and then click the OK button.

When the appropriate queue is specified, the printer driver will be installed.

Select “PCL Driver (default A4)” or “PCL Driver (default Letter).”

Click the Install Software icon on the Menu screen.

Click the Next button. Follow the instructions on the screen.

Select “Standard Installation,” and then click the Next button.

Select “Network Shared Printer” or “Brother Peer-to-Peer Network Printer,” and then click the Next button.

Go to Step 6.

Connect the network interface cable to the printer, and then connect it to a free port on your hub.

The setup is now complete.

1 Follow the instructions for the appropriate network connection style and your operating system.

Driver Installation Guide

Windows

For Network Users

Color Laser Printer HL-4000CN

LJ3857001 Printed in Japan

Click the Next button.

Enter your printer’s IP Address and your unique port name, and then click the Next button.

After your PC has restarted, click

Start, Settings and Printers.

The setup is now complete.

Select the Brother HL-4000CN icon. From the File menu, select Properties to open the driver properties.

Click the Configure Port... button in the Ports tab.

Select “LPR” on protocol, and then click the OK button. Close the driver properties.

Select “LPR (Recommended),” and then click the Next button.

Click the Finish button, and then click the OK button. Click the Finish button again to restart your PC.

Click the Next button.

Enter your printer’s IP Address and your unique port name, and then click the Next button.

Select “LPR (Recommended),” and then click the Next button.

Click the Finish button.

Click the OK button. Click the Finish button to restart your PC.

After your PC has restarted, setup will be complete.

Click the Finish button to restart your PC.

After your PC has restarted, setup will be complete.

Enter your printer’s IP Address and the queue name BINARY_P1, and then click the OK button.

Select “LPR (Recommended),” and then click the Next button.

Note: If this screen appears, insert the Windows NT

4.0 CD-ROM into your CD-ROM drive.

Before you continue, please make sure that the administrator has configured the network printer settings correctly by referring to the Network Quick Setup Guide. Follow the instructions in this guide for your network type and operating system.

Windows

OFF ON

Click the Finish button.

The setup is now

complete.

1 Please follow the steps below when the printer is not set as the default printer.

Step 5 Connect the Printer to Your PC and Install the Driver

Step 5 Install the Driver and Connect the Printer to Your PC

Steps 1 to 4 Follow these steps in the Quick Setup Guide first.

Note: Setting Your Printer as the Default Printer (For Windows

2000/XP Users Only)

For Parallel Interface Cable Users Only

Note: When the “Add New Hardware Wizard” appears on your PC, click the Cancel button.

Note: Make sure the USB interface cable is NOT connected to the printer, and then begin installing the driver. If you have already connected the cable, remove it.

Click Start,

Settings and Printers.

Select the Brother HL-4000CN icon.

From the File menu, select Set as Default printer.

When this screen appears, make sure the printer power switch is on. Connect the USB interface cable to your PC, and then connect it to the printer. Click the Next button.

For USB Interface Cable Users Only

Select “PCL Driver (default A4)” or “PCL Driver (default Letter).”

Click the Install Software icon on the Menu screen.

Click the Next button. Follow the instructions on the screen.

Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the instructions on the screen.

Select “Standard Installation,” and then click the Next button.

Select “Local Printer with USB cable

,” and then click

the Next button.

Turn off the printer power switch.

Connect the parallel interface cable to your PC, and then connect it to the printer.

Turn on the printer power switch.

Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the instructions on the screen.

Click the Install Software icon on the Menu screen.

Note:

If the “Add New Hardware Wizard” appears on your PC, click the Cancel button.

Select “Standard Installation,” and then click the Next button.

Click the Next button.

Select “PCL Driver (default A4)” or “PCL Driver (default Letter).”

Select “Local Printer,” and then click the Next button.

Select the port where your printer is connected, and then click the Next button.

Click the Finish button.

The setup is now complete.

Follow the instructions in this guide for your interface cable.

©2002 Brother Industries, Ltd. ©1998-2002 TROY XCD Inc. ALL RIGHTS RESERVED Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP and HP/UX are trademarks of Hewllet-Packard Company. UNIX is a trademark of UNIX Systems Laboratories. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. All other brand and product names mentioned in this guide are registered trademarks of their respective companies.

Driver Installation Guide

Windows

For non-Network Users

Control Panel

Lights when the printer is ready to print. Blinks when the printer is receiving data. Lights when the printer has a problem. Blinks when the printer has a problem that the user cannot rectify. Contact your dealer or Brother authorized service representative. Lights when the printer has paper jams. Open the front cover with the indicated button to clear the jamed paper.

Print screen mode

Go back to the menu screen mode. N/A N/A

Force the remaining print data to be output.

Cancel printing.

Ready (Green)

Alarm (Red)

LEDs

Buttons

Form Feed / Set

Job Cancel / Back

Menu screen mode

Close the menu screen mode and switch to the print screen mode. Scroll through menus and menu items.

Moves the displayed menu one level down.

Moves the displayed menu one level up. Select menus and menu items. Moves the displayed menu one level down. Sets the displayed parameter. Moves the displayed menu one level up.

Display

LED indicators Buttons

Language Setting (Default is English):

When you want to change the language of the control panel message, refer to “Setting Your Language on the Control Panel” in the Network Quick Setup Guide (the reverse side of the Quick Setup Guide).

For more information, see “CONTROL PANEL” in chapter 5 of the User’s Guide on the supplied CD-ROM.

Windows