Brooks Instrument 3750 Specifications

DS-VA-MT3750C-eng

April, 2018

Data Sheet

MT3750C Series

MT3750C Series

Variable Area

Metal Tube Variable Area

Ships in 5 days

Overview

Brooks® MT3750 meter operation is based on the variable area principle. The all metal
meter is ideal for a variety of gas and liquid applications. These meters are indispensable
where high pressure operating conditions exist.

The primary meter is available in 316L stainless steel construction. But corrosion resistant

materials of construction are available which makes it a perfect t for the metering of

aggressive applications.

A broad range of threaded connection sizes and types provide for exible installations.

The very popular mechanical indicator option does not require power which reduces

installation costs and is a cost-effective solution for ow measurement in hazardous areas.
Certied transmitters and alarms both ameproof and instrinsically safe are available for

hazardous installations anywhere in the world.

Product Description

The Brooks
wetted parts. The magnetically coupled indicator provides a highly reliable method of

indication. This model is a practical and economical approach to low ow rate indication
for high pressure and difcult to handle uids.

Optional accessories include 4-20 mA output, Needle Valve, Flow Controllers and Alarms.

®

Ar-MiteTM is a reliable, low ow metal tube owmeter with 316L stainless steel

Flowmeters

Features and Benets

Features Benets

®

Wetted Parts made from Stainless Steel or Monel

Ranges up to 100 I/h or 26 GPH Capable of measuring (very) low ows accurately

High Pressure and Temperature Rating Designed to work safely under difcult conditions

Miniature Size Compact even with process anges

Local Reading, Integral Control Valve, Needle Valve, Transmitter or Alarms, versatile product offering

Certied Ex-proof, Intrinsically safe ATEX, CSA, IECEx and NEPSI Approved

Compatible for a wide range of uids (liquids or gases)

1

Product Specications / Capacities

Table 1 MT3750C Specications

Specications MT3750C

Measuring Range See Capacities Table 2

Rangeability 10:1 (most sizes)

Metering Tube 316L (stainless steel)
Monel K-500

End Fittings 316L (stainless steel)

Monel K-500

Accuracy 5%, 3%, VDI/VDE class 4, 2.5

Repeatability 1% Full Scale

Scale Silver increments with black background - Aluminum Material (52 mm long), single or dual

Connections 1/4” to 3/4”NPT Female

1/4”, 6 mm tube compression

Floats 316L stainless steel
Titanium Gr. II

O-rings Viton® uoroelastomers

PTFE Teon®, Buna-N, Kalrez® 4079 peruoroelastomers, Ethylene Propylene

Protection Category (Indicator only) IP66/67/NEMA 4X, (Alarms) IP65/NEMA 4X, (Transmitter) IP66/67/NEMA 4X

Indicator Housing & Cover Die cast Aluminum (Alloy 380), epoxy paint, glass window

Maximum Fluid Temperature 204°C/400°F (Refer to tables on Page 3)

Maximum Fluid Pressure 1500 PSIG (100 Bar)

4000 PSIG (276 Bar) (No valve, 1/4” NPT only)

Meter Dimensions Refer to Figures on Pages 4, 5 and 6

Model Code Refer to Pages 10, 11 & 12

Pressure Equipment Directive Flowmeter complies under Sound Engineering Practices (SEP)

(PED) 2014/68/EU

RoHS Products conform to the European Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU

Inductive Alarm Switches 1 or 2 inductive switches

Reed Switches 1 or 2 switches

Transmitter 4-20 mA output

Agency Approvals Refer to Tables 6-9

Optional Equipment Cartridge or NRSTM valves

Integrally mounted ow controllers

Table 2 MT3750C Capacities

Meter Flow Range Viscosity Pressure
Size Water Air

gph l/h ln/h scfh m3n/h CP mBar Inches WC

0 0.025-0.25 0.096-0.96 4.3-43 0.16-1.6 - 5 12 4.8
1 0.034-0.34 0.13-1.3 5.6-56 0.21-2.1 - 10 12 4.8
2 0.096-0.96 0.36-3.6 13.0-120 0.5-4.9 - 20 12 4.8
3 0.29-2.8 1.0-10 - 1.2-12 0.033-0.33 35 12 4.8
4 0.55-5.5 2.1-21 - 2.5-23 0.063-0.62 70 32 12.8
5 1.1-11 4.2-42 - 5.4-53 0.15-1.3 100 38 15.3
6 2.8-26 11-100 - 12-110 0.31-3.1 130 44 17.7

Notes:

1. Air ows in scfh converted to 70°F and 14.7 psia when the meter is operated at 70°F and 14.7 psia.

2. Air ows in m

3

n/h (converted to normal conditions: 0° and 1.013 bar abs) when the meter is operated at 1.013 bar abs and 20°C.

3. When the viscosity of the uid exceeds the viscosity immunity ceiling (VIC), a calculated correction is applied to account for the difference between factory
calibration uid and process uid.

2

(1, 2)

Limit

(3)

Drop

Product Specications - Pressure / Temperature and Certications

Product Approvals - 3750

Table 3 MT3750C Pressure Ratings in PSIG (BarG)

Meter Pressure Rating

Type -58°F to 400°F / -50°C to 204°C

Standard Meter 1500 (100)

High Pressure Meter 4000 (276)

Table 4 MT3750C Fluid Temperature at Ambient Temperature

Max. Ambient Max. Fluid Temperature per Option
Temperature Indicator Alarm Transmitter

°F °C °F °C °F °C °F °C

-58 -50 -58 to 400 -50 to 204 N/A N/A N/A N/A

-20 -29 400 204 -20 to 250 -29 to 120 -20 to 180 -29 to 82
104 40 400 204 250 120 180 82
110 43 390 199 250 120 175 79
120 49 380 193 250 120 170 76
130 54 370 187 250 120 165 74
140 60 360 182 240 115 155 68
150 65 350 176 235 112 150 65
Notes:

1. Ambient temperature is limited to 150°F (65°C) maximum. Contact factory for ambient temperature > 150°F (65°C)

Table 5 MT3750C Temperature Ratings for Elastomer Materials

Elastomer Minimum Temperature Maximum Temperature

Materials °F °C °F °C

Kalrez 4079 -58 -50 400 204
Viton A 5 -15 400 204

Teon PTFE -58 -50 400 204

Buna -22 -30 250 120

Ethylene Propylene -58 -50 250 120

Table 6 Product Approvals - MT3750C (Reference Tables 7, 8 & 9 for Certications with Transmitter, Reed Switch Alarm and Inductive Alarm)

ApprovalsMark

EU Declaration of
Conformity

CRN
IP66/67 & NEMA 4X
IP66/67
IP65
Type 4X

Explosion safety
"Constructional safety
(c)"








ATEX

Meter Options

Mechanical

Transmitter

Inductive Switch









Declaration/CertificateStandards/Directives/Marking

Alarm

Reed Switch Alarm

EMC Directive (2014/30/EU)
RoHS Directive (2011/65/EU)
Pressure Equipment Directive (2014/68/EU)
ASME B31.1 & ASME B31.3
IEC 60529 & NEMA 250-2014
IEC 60529
IEC 60529
CSA

II 2GD c IIC TX

Special conditions for safe use:

Enclosure contains glass & painted aluminum parts. If it is m ounted in an area where the use of
category 2G or 2D apparatus is required, it must be installed such that ignition source due to
propagating brush discharge sparks are excluded.

The actual maximum surface temperature of the equipment depends not on the equipment itself, but
on operating conditions of the process fluid/gas flowing through the equipment. The equipment by
itself does not generate heat. Due to this reason the temperature class is marked as TX. The
maximum permitted ambient and process temperature limits can be found in the operating
instructions.

At start up especially for gas applications, ensure that the pressure is graduall y increased through the
piping system. A sudden pressure spike situation may result in a fast movement of the float within the
VA flowmeter & the float may hit hard against the float stop.

Declaration
Declaration
Declaration - SEP
CRN
Declaration
DEKRA Certificate/ UL
DEKRA Certificate
CSA / UL Certificate

MBID 022

3

Product Dimensions - Threaded Connections with Indicator Only

*Flow controller bracket not shown. Contact Brooks Instrument for drawing of ow controller with bracket.

4

Product Dimensions - Threaded Connections w/Transmitter or Inductive Alarm

*Flow controller bracket not shown. Contact Brooks Instrument for drawing of ow controller with bracket.

5

Product Dimensions - Threaded Connections w/Reed Switch Alarm

*Flow controller bracket not shown. Contact Brooks Instrument for drawing of ow controller with bracket.

6

Product Specications - Transmitter

Mechanical

Transmitter

Inductive Switch

Alarm

Reed Switch Alarm

ATEX



IECEX



UL



NEPSI



Explosion safety
"Intrinsic Safety (ia)"

ATEX



IECEX





NEPSI



Explosion safety
"Non-sparking (nA)"

IECEX





Russia Custom Union
Excessive Pressure



Russia Custom Union
Explosion safety



II 2 G Ex ia IIC T6
II 2 D Ex iaD 21 IP66/IP67 T70°C, II 2 D Ex tD A21 IP66/IP67 T70°C
EN 60079-0:2006, EN 60079-11:2007
EN 61241-0:2006, EN 61241-11:2006

Ex d IIC T6 Gb
GB3836.1-2010 GB3836.2-2010

Ex ia IIC T6
IEC 60079-0:2004 IEC 60079-11:1999

Class I, II, III, Div.1, Groups A, thru G, T6
Class I, Zone 1 AEx ia IIC T6, Ex ia IIC T6

Ex ia IIC T6 Gb
Ex iaD 21 T70°C
GB3836.1/4-2010, GB 12476.4-2010

Ex nA II T6

Class I, Div.2, Grps A, B, C, and D;
Class II Grps F and G, T6
Class I, Zone 2 AEx nA II T6, Ex nA II T6

Custom Union including Russia
"On safety of the equipment for work in explosive environments"
ТR СU 012/2011 (TR CU Ex)

Custom Union including Russia
“On safety of the equipment operating under excessive pressure”
TR CU 032/2013

Meter Options

EX d IIC T6
IEC 60079-0:2004 IEC 60079-1:2003

Special conditions for safe use:

For information regarding the dimension of the flameproof joints the
manufacturer shall be contacted.

Class I, Div.1, Groups A, B, C, and D,T6
Class II, Div.1, Groups E, F, and G
Class I, Zone 1 AEx d IIC T6, Ex d IIC T6

II 2 G Ex d IIC T6
II 2 D Ex tD A 21 IP66 T 85°C
EN 60079-0:2006, EN 60079-1:2004, EN 61241-0:2006, EN 61241:2004

Special conditions for safe use:

For information regarding the dimension of the flameproof joints the
manufacturer shall be contacted.

Explosion safety
"Flame Proof"

Table x-xx Product Approvals - 3750 With Transmitter

Standards/Directives/MarkingApprovalsMark

KEMA 01ATEX2174

IECEx KEM 06.0049

UL File E73889

GYJ11.1638X

KEMA 01ATEX1033

IECEx KEM 06.0037

1292059

GYJ11.1637

IECEx KEM 06.0037

1292059

TC NRU Д-U.AУ04.B.05988

RU C-HU.ГБ08.B.00741

Declaration/Certificate

Table 7 Product Approvals - MT3750C with Transmitter

Description - Transmitter
The transmitter provides accurate magnet angle detection and
conversion to a 4 - 20 mA industry standard output signal,

based on the position of a oat assembly in the owmeter. This

rugged, compact, microprocessor-driven device is capable of

providing accurate ow information to your external support

systems. The patented magnetic sensor with automatic gain
control enables an extremely high dynamic capture range with-

out sacricing accuracy. (Reference Transmitter Wiring Diagram
on page 9)

7

Product Specications - Reed Switch Alarm/Limit Switches

Table x-xx Product Approvals - 3750 With Reed Switch Alarm

Description - Reed Switch Alarm
Two reed switches are installed in the alarm housing to provide

signaling or switching functions when a preset ow value has

been reached. The reed switches provide high, low or dual
setpoints and latched output over the full range. The switches

are normally adjusted to the desired ow range in the factory.
Modications to the switch settings can be made in the eld.

Minimum setting distance between two switches is approximately

40% of the scale. (Reference Reed Switch Wiring Diagram on
page 9)

Data Reed Switch
Maximum Voltage* 175 Vdc, 124 Vac
Maximum Current* 250 mA
Maximum Contact Rating* 3 Watts

(*Maximum Switch Specications)

Electrical Classication

Non Incendive:
Maximum Voltage 30 Vdc
Maximum Current 100 mA
Maximum Contact Rating 3 Watts

Table 8 Product Approvals - MT3750C With Reed Switch Alarm

Meter Options

ApprovalsMark

Explosion safety
"Intrinsic Safety (ia)"

Explosion safety
"Non-incendive"

Explosion safety
"Intrinsic Safety (ia)"

Mechanical

Transmitter

Standards/Directives/Marking Declaration/Certificate

Inductive Switch

Alarm

Reed Switch Alarm



Class I, Div 1, Groups A, B, C and D; Class II, Groups E, F and G; Class
III; Encl Type 4X
IS Entity Parameters: Vmax=30Vdc, Imax=100mA, Ci=0, Li=0



Class I, Div 2, Groups A, B, C and D; Class II, Groups E, F and G; Class
III; Encl Type 4X



Reed Switch Alarms are classified as “Simple Apparatus” when used in Intrinsically Safe circuits.
They comply with the requirements of EN60079-11 clause 5.7 – Simple apparatus.

Ambient Temperature ratings: -20° C ≤ Tamb ≤ 65° C
Input parameters: Vmax = 30V, Imax = 100mA, Ci = 0μF, Li = 0μH

Special conditions for safe use:

• The product should be installed by suitably trained personnel, in accordance with the applicable
code of practice.

• As the product has no source of internal heating, the temperature classification is dependent on the
ambient air temperature.

• Since part of flowmeter enclosure is made of painted aluminum, if it is mounted in group II, category
1 area, it must be installed such, that, ignition sources due to propagating brush discharge spar ks are
excluded

1788748

1788748

8

Product Specications - Reed Switch Alarm/Limit Switches

Reed Switch Wiring Diagram

Transmitter Wiring Diagram

9

Product Specications - Limit Switches/Inductive Alarm Switch

Table x-xx Product Approvals - 3750 With Inductive Alarm

Limit Switches - Inductive Alarm Switch
One or two electronic limit switches type SJ2-N can be installed
in the indicator housing to allow initiation of signaling or

switching functions on a preset ow value being reached. The

SJ2-N limit switch operates as a slot initiator that is inductively

actuated by a cam mounted to the pointer. Any ow value can

be used for setting the limit value by sliding the switch along
the slot in the mounting plate for the initiators. Minimum
setting distance between two limit switches is approximately
50% of the scale range.

Power supply 8 Vdc (Max. 15.5 Vdc)
Current consumption active area clear: > 3 mA

Current consumption active area obscured: < 1 mA
Self inductance 29 µH
Self capacitance 20 nF

Max Temp 158°F (70°C)

The ow valve can be used for setting the limit value by sliding

the switch along the slot in the mounting plate for the initiators.
Minimum setting distance between two limit switches is
approximately 50% of the scale range.

Table 9 Product Approvals - MT3750C With Inductive Alarm

Meter Options

Approvals

Mechanical

Explosion safety
"Intrinsic Safety (ia)"

Explosion safety
"Non-sparking (nA)"

Russia Custom Union
Excessive Pressure

Russia Custom Union
Explosion safety

ATEX

IECEX

NEPSI

NEPSI

Transmitter

Standards/Directives/MarkingMark Declaration/Certificate

Inductive Switch

Alarm

Reed Switch Alarm

















II 2 G Ex ia IIC T6
II 2 D Ex ia D 21 IP65 T75°C
EN 60079-0:2006, EN 60079-11:2007
EN 61241-0:2006, EN 61241-11:2006

Ex ia IIC T6 Gb
Ex ia IIIC T 75°C Db IP65
IEC 60079-0:2007-10 , IEC 60079-11:2006 , IEC 61241-11:2005

Class I, II, III, Div.1, Groups A thru G, T6
Class I, Zone 0, Zone 1 AEx ia IIC, T6
Ex ia IIC T6

Ex ia IIC T6 Gb
GB3836.1-2010 GB3836.4-2010

Class I, II, III, Div. 2, Groups A thru G, T6
Class I, Zone 2 AEx nA II, T6
Ex nA II T6

Ex nA IIC T6 Gc
GB3836.1:2010; GB3836.8:2003

Custom Union including Russia
“On safety of the equipment operating under excessive pressure”
TR CU 032/2013

Custom Union including Russia
"On safety of the equipment for work in explosive environments"
ТR СU 012/2011 (TR CU Ex)

KEMA 02ATEX1126

IECEx KEM 09.0046

1379260

GYJ11.1639

1379260

GYJ13.1315

TC N RU Д­U.AУ04.B.05988

RU C-HU.ГБ08.B.00741

10

Model Code

Code Description Code Option Option Description

I. Base Model Number 3750C 55 mm, Armored Purge Flowmeter

II. Material Specication 1 316L Stn. Stl. & CRN Certication

4 316L Stn. Stl., CRN Certication & Section IX Welding
5 316L Stn. Stl., CRN Certication & Certied Material to EN 2.2/Section IX Welding
6 316L Stn. Stl., CRN Certication & Certied Material to EN 3.1/Section IX Welding

C 316L Stn. Stl., Certied material to EN 3.1
D 316L Stn. Stl. with Section IX Welding
E 316L Stn. Stl., Certied Material to EN 2.2/Section IX Welding
F 316L Stn. Stl., Certied Material to EN 3.1/Section IX Welding
G Monel K500
H Monel K500 Certied Material to EN 3.1

III. Meter Size 316L Tube Monel K 500 Tube

2** Size 2 - 316L Stn. Stl. Float Size 2 - Monel K 500 Float
3** Size 3 - 316L Stn. Stl. Float Size 3 - Monel K 500 Float
4** Size 4 - 316L Stn. Stl. Float Size 4 - Monel K 500 Float
5** Size 5 - 316L Stn. Stl. Float Size 5 - Monel K 500 Float
6** Size 6 - 316L Stn. Stl. Float Size 6 - Monel K 500 Float

IV. Construction/Seals Construction Seals
A** Standard Design Viton O-rings
B Standard Design Teon O-rings (No Valve Only)
C Standard Design Buna O-rings
D** Standard Design Kalrez O-rings (With/Without Valve)
E Standard Design EPM O-rings
F Standard Design Teon in Meter and Kalrez in Valve
G All Welded/High Pressure No Elastomer - No Valve Cavity

V. Connection Size and Type 1** 1/4” NPT (F) - Integral

VI. Connection Orientation 1** Horizontal Inlet and Outlet (Threaded Connections Only)

VII. Valve Conguration A** No Valve (Standard Fitting with Plug)

VIII. Accuracy/Inscription/Fluid Accuracy Inscription Fluid

B** 4 VDI / 5% FS % Scale Liquid

E** 4 VDI / 5% FS Direct Reading Gas
F 4 VDI / 5% FS % Scale Liquid - High Viscosity
G 4 VDI / 5% FS Direct Reading Liquid - High Viscosity

K 2.5 VDI / 3% FS % Scale Gas
L 2.5 VDI / 3% FS Direct Reading Gas
M 2.5 VDI / 3% FS % Scale Liquid - High Viscosity

** Select meters ship in 5 days. Max order quantity = 5 meters. Consult factory on orders of more than 5 meters.

2 316L Stn. Stl., CRN Certication & Certied Material to EN 2.2
3 316 Stn. Stl., CRN Certication & Certied Material to EN 3.1

A** 316L Stn. Stl.

B 316L Stn. Stl., Certied Material to EN 2.2

0 Size 0 - Titanium Float Size 0 - Titanium Float

1** Size 1 - 316L Stn. Stl. Float Size 1 - Monel K 500 Float

2 1/4” Tube Compression - With Adapter
3 6 mm Tube Compression - With Adapter
4 1/4” Rc (F) - With Adapter
5 1/2” NPT (F) With Adapter
6 3/4” NPT (F) - With Adapter

B** Low Flow Valve on Inlet - Typical for Sizes 0, 1, 2
C** Medium Flow Valve on Inlet - Typical for Sizes 3 & 4
D** High Flow Valve on Inlet - Typical for Sizes 5 & 6

E No Valve Cavity - All Welded / High Pressure Only
K NRS Valve - Size 3 on Inlet - Typical for Sizes 0 & 1

L NRS Valve - Size 4 on Inlet - Typical for Size 2
M NRS Valve - Size 5 on Inlet - Typical for Size 3
N NRS Valve - Size 6 on Inlet - Typical for Sizes 4 & 5
P NRS Valve - Size 7 on Inlet - Typical for Size 6

T Mounted to 316L SS 8802 Flow Controller with Viton Diaphragm

U Mounted to 316L SS 8805 Flow Controller with Teon Diaphragm

V Mounted to 316L SS 8902 Flow Controller with Viton Diaphragm
W Mounted to 316L SS 8905 Flow Controller with Teon Diaphragm
1 Mounted to 316L SS 8802 Flow Controller with Teon Diaphragm
3 Mounted to 316L SS 8902 Flow Controller with Teon Diaphragm

9 N/A No Scale N/A
A N/A Blank Scale N/A

C** 4 VDI / 5% FS Direct Reading Liquid
D** 4 VDI / 5% FS % Scale Gas

H 2.5 VDI / 3% FS % Scale Liquid

J 2.5 VDI / 3% FS Direct Reading Liquid

N 2.5 VDI / 3% FS Direct Reading Liquid - High Viscosity

(Model Code continued on next page)

11

Model Code (continued)

Code Description Code Option Option Description

IX. Electrical Output A** None
B Reed Switch Alarm, Meter Mounted
E Single Inductive Alarm with M20 x 1.5 Electrical Connection
F Single Inductive Alarm with 1/2” NPT (F) Electrical Connection
G Double Inductive Alarm with M20 x 1.5 Electrical Connection
H Double Inductive Alarm with 1/2” NPT (F) Electrical Connection
J Mat Transmitter with M20 x 1.5 Electrical Connection
K Mat Transmitter with 1/2” NPT (F) Electrical Connection

X. Alarm Relay/ A** None
Transmitter Power Supply B Power Supply 24 Vdc with IS Barrier
C Power Supply 120 Vac with IS Barrier
D Power Supply 240 Vac with IS Barrier
E 24 Vdc 1 Channel
F 24 Vdc 2 Channel
G 120 Vac 1 Channel
H 120 Vac 2 Channel
J 240 Vac 1 Channel
K 240 Vac 2 Channel

XI. Certications/Approvals A** None
C Zone 1, Intrinsically Safe CENELEC - ATEX
D Zone 1, Flame-proof CENELEC - ATEX
E Division 2/Zone 2, Non-incendive CSA - USA and Canada (Transmitter 1/2” NPT & Alarms)
F Division 1/Zone 1, Intrinsically Safe CSA - USA and Canada (Transmitter 1/2” NPT & Alarms)
G Division 1/Zone 1, Explosion-proof/Flame-proof UL Listed - USA and Canada
H Zone 1 Intrinsically Safe NEPSI (China) (1/2” NPT and M20 Elec. Conn.)
J Zone 2 Non-sparking NEPSI (China) (1/2” NPT and M20 Elec. Conn.) - Alarm Only
K Zone 1 Flame-proof NEPSI - Transmitter Only (China) (M20 Elec. Conn. Only)
L Zone 1 Intrinsically Safe IECEx (World) (1/2” NPT and M20 Elec. Conn.)
M Zone 2 Non-sparking IECEx (World) - Transmitter Only (1/2” NPT and M20 Elec. Conn.)
N Zone 1 Flame-proof IECEx (World) - Transmitter Only (M20 Elec. Conn.)
P TR CU Ex Zone 2, Non-incendive/non-sparking (Customs Union including Russia) - Transmitter 1/2” NPT & Alarm
R TR CU Ex Zone 1, Flame-proof XP - IIC (Customs Union including Russia)
S TR CU Indicator only (Customs Union including Russia)
T Zone 1 Flame-proof - KOSHA (Korea)
U Zone 1/Zone 2 Non-Electrical ATEX

XII. Material Inspection A** None
1 NACE MR0175 MR0103 - 2.1 Certicate only (316L SS Construction Only)
2 Liquid Dye Penetrant Test Report - 3.1 (Welds Only) - (316L SS Construction Only)
3 Certied According to NACE MR0175 MR0103& Liquid Penetrant
4 International Calibration Certicate Includes Scale Check
5 ICC & NACE MR0175 MR0103
6 Positive Material Identication Report - 3.1
7 PMI & LDP
8 ICC & PMI
9 ICC, PMI & LDP
B LDP, ICC
C LDP, NACE MR0175 MR0103
D LDP, NACE MR0175 MR0103, PMI
E LDP, NACE MR0175 MR0103, PMI, ICC
F ICC, PMI, NACE
H LDP, ICC, NACE

XIII. Accessory A** None
B Flush Panel Mounting (Indicator and Threaded Connections Only)
C No Brooks Identication (Indicator Only)
D Degrease for Oxygen Service
E Commercial Clean
S Flush Panel Mounting & Degrease for Oxygen Service (Same as Option B)
T Flush Panel Mounting & Special Cleaning (Same as Option B)

XIV. Accessory Group 2 0** None
B Bracket, FCA, Standard
C Bracket, FCA, Stainless Steel
D Dual Scale
E Dual Scale and Standard Bracket
F Dual Scale and SS Bracket

Sample Standard Model Code

I II III IV V VI VII VIII IX X XI XII XIII XIV
3750C A 2 A 1 1 A B A A A A A 0

** Select meters ship in 5 days. Max order quantity = 5 meters. Consult factory on orders of more than 5 meters.

12

Brooks Service and Support

Brooks is committed to assuring all of our customers receive the ideal ow solution for their application, along with outstanding ser­vice and support to back it up. We operate rst class repair facilities located around the world to provide rapid response and support.
Each location utilizes primary standard calibration equipment to ensure accuracy and reliability for repairs and recalibration and is
certied by our local Weights and Measures Authorities and traceable to the relevant International Standards.

Visit www.BrooksInstrument.com to locate the service location nearest to you.

START-UP SERVICE AND IN-SITU CALIBRATION

Brooks Instrument can provide start-up service prior to operation when required. For some process applications, where ISO-9001

Quality Certication is important, it is mandatory to verify and/or (re)calibrate the products periodically. In many cases this service

can be provided under in-situ conditions, and the results will be traceable to the relevant international quality standards.

SEMINARS AND TRAINING

Brooks Instrument can provide seminars and dedicated training to engineers, end users, and maintenance persons.

Please contact your nearest sales representative for more details.

Due to Brooks Instrument’s commitment to continuous improvement of our products, all specications are subject to change without notice.

TRADEMARKS

Brooks, Ar-Mite & NRS ....................................................Brooks Instrument, LLC

All other trademarks are the property of their respective owners.

13