Broan QS330SS User Manual
ALLURETM
RANGE HOOD
MODELS QS1, QS2, & QS3
SPECIFICATION SHEET
Meeting customer demands for a contemporary styled
range hood that is 50% quieter than average hoods, is
easy to clean, and brightly lights the cooktop.
FEATURES
Clean, sleek appearance
•
Durable, baked-on polyester finish paint or brushed finish
•
stainless steel
Over 50% quieter than the average range hood
•
Exclusive DuPont Teflon
•
cleaning (QS2 & QS3)
Large, full filter design - dishwasher-safe for easy cleaning
•
Dual halogen lights provide focused lighting for unmatched
•
cooktop visibility as well as a soft, night-time level (lamps not
included)
Axial blade (QS1) or centrifugal blower (QS2 & QS3) provides
•
increased performance and quieter operation.
Flush-mounted controls
•
Versatile design allows for 3¼" x 10", 7" round, or non-ducted
•
discharges without re-positioning blower
Adjustable duct connectors - accommodate off-center ductwork
•
CleanSense™ charcoal filters change color when replace-
•
ment is necessary (for non-ducted installations - purchase
separately)
Available in 30", 36", or 42" widths in White, Biscuit, Almond,
•
Black, and Stainless Steel
Bi-lingual carton graphics and installation manual (English/
•
Spanish) (English/French Canadian in Canada)
Broan Heat Sentry™ - automatically turns blower to high
•
(QS2), on or higher (QS3) when excess cooking heat is
detected
®
, non-stick bottom cover for easy
SPECIFICATIONS MODEL
QS1 QS2 QS3
Volts 120 120 120
HZ 60 60 60
Amps 1.8 2.0 3.0
Max. cfm (horizontal) 220 300 300*
Sones (norm.) 1.5 0.9 0.4*
Sones (high) 5.0 4.5 4.5
Controls 2-sp rocker 3-sp electronic 4-sp electronic
Halogen Flood Light PAR20
Charcoal Filter BPSF‡ BPSF‡ BPSF
DuPont Teflon
Broan Heat Sentry™ No Yes Yes
* 430 cfm & 8.0 sones in Boost mode (QS3 only). † 2 bulbs req. (not included).
‡
Purchase separately for non-ducted installation.
Teflon® is a registered
trademark of DuPont.
®
†
No Yes Yes
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119
PAR20
†
PAR20
†
‡
TYPICAL SPECIFICATION
Range hood shall be Broan QS1 (QS2) (QS3) Series.
Unit will have clean, contoured appearance with no sharp edges.
Finish to be baked-on polyester paint (matte finish stainless
steel). It must have a fully-enclosed bottom and dishwashersafe, full filters.
Hood to be convertible between 3¼" x 10" and 7" round ducted
(using two washable aluminum filters) as well as non-ducted
(using two CleanSense™ filters - must be purchased separately).
Duct connectors must be adjustable to accommodate off-center
ductwork.
Range hood to have an axial blade (centrifugal blower) and twin,
50-watt (max.) halogen flood lights. Blower and lights shall be
operated using a specially-designed, adjustable control with
2-speed rocker (3-speed electronic push button) (4-speed electronic, with delayed "off" and filter reminder).
Air delivery shall be no less than 220 cfm (QS1), 300 cfm (QS2),
430 cfm (QS3) when ducted horizontally. Sound level to be no
greater than 1.5 Sones/100 cfm - 5.0 Sones/220 cfm (QS1);
0.9 Sones/100 cfm - 4.5 Sones/300 cfm (QS2); 0.4 Sones/100
cfm - 4.5 Sones/300 cfm - 8.0 Sones/430 cfm in "Boost" mode
(QS3). Air and sound ratings to be certified by HVI. Unit shall
be U.L. and CU.L. listed.
LISTED
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures
prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art test laboratory. Sones are a measure of
humanly-perceived loudness, based on laboratory measurements.
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
90A 99043473C
Loading...