Broan HLB3 Specifications

SPECIFICATION SHEET
IN-LINE BLOWER MODEL HLB3
For use with Broan Elite and NuTone Premier Hoods.
Powerful yet quiet blower - exhausts the cooking area from a remote location.
FEATURES
BLOWER:
Low RPM for quiet operation
Resilient anti-vibration mounts
Dynamically-balanced, galvanized steel, centrifugal
blower wheel for quiet, efficient performance
Permanently lubricated, thermally protected motor
Plug-in motor rated at 120 VAC
Designed for continuous operation
HOUSING:
Rugged galvanized steel
8-position mounting brackets for easy installation
and greater adaptability to various mounting requirements
Automatic backdraft damper located within exhaust
duct connector
Factory-shipped in horizontal discharge position
May be converted to vertical discharge
Suitable for kitchen installations
ACCESSORIES INCLUDED:
8-inch round integrated duct connectors
One (1) 8-inch to 10-inch-round transition
Hanger kit - for additional installation flexibility
TYPICAL SPECIFICATION
In-Line Blower shall be Model HLB3. Unit shall have galvanized steel housing. Housing to
have adjustable mounting brackets. Blower to include hanger kit, one (1) 8-inch to 10-inch-
round transition, and 8-inch round integrated duct connectors.
Automatic backdraft damper to be located within exhaust duct connectors. Duct connectors, blower assembly and wiring plate shall be adjustable for either horizontal or vertical installation.
Blower unit shall be removable from housing and will have a galvanized steel, centrifugal-type blower wheel. Motor to be permanently lubricated and mounted with resilient anti-vibration mounts.
Air delivery shall be no less than listed. All air ratings shall be certified by HVI. Unit to be UL and cUL listed.
8” ROUND
DUCT
CONNECTOR
SPECIFICATIONS
Volts Hz Amps CFM Duct Weight
12 0 60 2.6 260 (V) 8” Round * 27.8 lbs.
280 (H)
* Performance ratings include the addition of a 10” round
transition on inlet.
Broan-NuTone LLC, 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
REFERENCE QTY. REMARKS Project
Location Architect Engineer Contractor Submitted by Date
50C 99043705B
Loading...