FAN-FORCED
WALL HEATERS
SPECIFICATION SHEET
Broan brings the "designer" look to wall heaters in
a wide choice of performance and finish options.
FEATURES
GRILLE:
Designer-styled, one-piece construction with rounded
•
corners
White, baked enamel finish
•
20-gauge, with downflow louvers
•
Front-mounted thermostat
•
Color-coordinated mounting screws and thermostat knob
•
HEATER ASSEMBLY:
Nickel-chrome resistance alloy heating element
•
Mica insulated, zig-zag element configuration
•
Snap-action, bi-metallic thermostat
•
120 VAC units can be converted to operate on 240 VAC
•
Wattage convertible (except 165F)
•
Manual reset thermal overload protector
•
Permanently lubricated motor
•
High-efficiency blower wheel
•
Removable from housing for cleaning or servicing
•
HOUSING:
24-gauge steel finished with black expoxy paint
•
Removable wiring cover - connect wiring away from tight
•
corners
Mounts directly to wall studs
•
Can be recess or surface-mounted (surface mounting
•
requires Model 84 kit)
Includes housing mask - to prevent construction damage to
•
roughed-in heater
Model 171H: Rough-in housing for use with finish assemblies
Models 165F, 167F, 170F, 174F, 178F: Finish assemblies
for use with 171H rough-in housing
Models 165FT, 167FT, 170FT, 174FT, 178FT: Finish assemblies for use with 171H rough-in housing (Includes builtin thermostat)
ACCESSORIES: (Purchase separately)
Model 84 Surface-Mounting Kit
•
Model 86W Line-Voltage Thermostat
•
Model 59V, 59W 60-Minute Timer
•
Model 61V, 61W 15-Minute Timer
•
Model 83 Integral Thermostat (Use with 165F, 167F, 170F,
•
174F or 178F Finish assemblies when built-in control is
desired)
NOTE: This heater is intended to be used to supply supplemental heat from a wall location in new or existing construction.
TYPICAL SPECIFICATION
Heater shall be Broan Model 165F, (167F), (170), (170F),
(174), (174F), (178), (178F).
Unit shall have steel housing finished with black, epoxy
paint. It will be recessed (surface) - mounted.
Heater to deliver 500, (750), (1000), (1500), (2000) watts of
fan-forced heat at safe "black" temperatures. It must be
wattage-convertible or voltage-selectable. Heater shall include a thermal overload protector with manual reset.
Grille will be White in color and be of 20-gauge, one-piece
construction with no sharp edges. Unit to be controlled with
front-mount thermostat, (Model 86W - Line-Voltage Thermostat), (Model 59V, 59W-60 Minute Timer), (Model 61V, 61W15-Minute Timer).
Heater shall be U.L. Listed.
Broan-NuTone LLC, 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
60K 99041273F
PERFORMANCE RATINGS — FAN-FORCED WALL HEATERS
MODEL WATTS VOLTS AMPS BTU/HR. GRILLE PACKAGING SHIPPING WT. (Lbs.)
165F 500 240 2.08 1707 Off White Single 5
375 208 1.80 1280
500 120 4.16 1707
167F 750 / 1500 240 3.13 / 6.25 2560 / 5120 Off White Single Heater 5
11/25 / 562 208 541 / 2.71 3840 / 1920 Assembly and
Grille Only
170 1000 / 500 120 8.3 / 4.1 3413 / 1707 Off White Single 7.5
750 208 3.61 2560
1000 240 4.16 3413
170F 1000 / 500 120 8.3 /4.1 3413 / 1707 Off White Single Heater 5
750 208 3.61 2560 Assembly and
1000 240 4.16 3413 Grille Only
174 1500 / 750 120 12.5 / 6.2 5120 / 2560 Off White Single 7.5
1125 208 5.41 3840
1500 240 6.25 5120
174F 1500 / 750 120 12.5 / 6.2 5120 / 2560 Off White Single Heater 5
1125 208 5.41 3840 Assembly and
5000 240 6.25 5120 Grille Only
178 2000 / 1000 240 8.3 / 4.1 6827 / 3413 Off White Single 7.5
1500 / 750 208 7.2 / 3.6 5120 / 2560
178F 2000 / 1000 240 8.3 / 4.1 6827 / 3413 Off White Single Heater 5
1500 / 750 208 7.2 / 3.6 5120 / 2560 Assembly and
Grille Only
171H — — — — — 4-Pack 2.4 ea.
Rough-In 11.9 4-Pack
Housings Only
Bold ratings are factory-wired.