Breville BCP200 User Manual
Crepe Creations
Instructions
BCP200
Contents
Page
Breville recommends safety first 4
Know your Breville Crêpe Creations 5
Using your Breville Crêpe Creations 6
Maintaining your Breville Crêpe Creations 8
Crêpe recipes 12
2
Congratulations
on the purchase of your new Breville Crêpe Creations
Breville recommends safety first
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,
our valued customer foremost in mind. In addition we ask that you exercise a degree of care when using any
electrical appliance and adhere to the following precautions:
BREVILLE RECOMMENDS SAFETY FIRST
• Carefully read all instructions before operation and
retain for future reference.
• Remove any packaging material and promotional
stickers and labels before using the Breville Crêpe
Creations for the first time.
• Do not place the Breville Crêpe Creations near the
edge of a bench or table during operation. Ensure
the surface is dry, level, clean and free of liquid
and other substances.
• Do not use the Breville Crêpe Creations on a metal
surface, for example, a sink drainboard.
• Do not place the Breville Crêpe Creations on or
near a hot gas burner, electric element, or where
it could touch a heated oven.
• Do not touch hot surfaces, use utensils provided to
spread batter. Use a heat proof plastic food slide to
turn and remove crêpes from the hot cooking plate.
• Do not leave the appliance unattended when in
use. Always ensure the appliance is turned off by
switching the On/Off switch to the Off position,
then switch the appliance off at the power outlet
and unplug the cord before moving the appliance,
when not in use, if left unattended and before
cleaning and storing.
• Always keep the appliance clean. Follow the
cleaning instructions provided in this book.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
• Fully unwind the cord before use.
• To protect against electric shock, do not immerse
the power cord, plug or appliance in water or any
other liquid.
• Do not allow the cord to hang over the edge
of a table or bench, touch hot surfaces or
become knotted.
• This appliance is not intended for use by young
children or infirm persons unless they have been
adequately supervised by a responsible person to
ensure they can use the appliance safely.
• Young children should be supervised to ensure that
they do not play with the appliance.
• Any maintenance other than cleaning should be
performed at an authorised Breville Service Centre.
• It is recommended to regularly inspect the
appliance. Do not use the appliance if the power
supply cord, plug or appliance becomes damaged
in any way. Return the entire appliance to the
nearest authorised Breville Service centre for
examination and/or repair.
• This appliance is suitable for household use only.
Do not use this appliance for anything other than
its intended use. Do not use in moving vehicles or
boats. Do not use outdoors.
• The installation of a residual current device (safety
switch) is recommended to provide additional
safety protection when using electrical appliances.
It is advisable that a safety switch with a rated
residual operating current not exceeding 30mA
be installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.
4
Know your Breville Crêpe Creations
Non-stick circular cooking plate
for easy cleaning
Red ‘Power On’ indicator light
indicates the cooking
plate is heating
Cord winder
Green ‘Ready’ indicator light
indicates the cooking
plate is ready to use
On/Off switch
Temperature selection control
Batter spreader
5
Using your Breville Crêpe Creations
Before first use, remove any packaging material,
promotional stickers and labels and wipe the cooking
plate with a damp cloth, then dry thoroughly.
Plug the Breville Crêpe Creations into a 230/240 Volt
power outlet and switch the power on at the power
outlet. To turn the Breville Crêpe Creations on, press
the On/Off switch to the ‘On’ position. The red ‘Power
On’ indicator light will illuminate to show that the
Breville Crêpe Creations cooking plate is heating.
Slide the temperature setting control to the desired
heat setting between 1 and 5.
The cooking plate will reach the selected
temperature in approximately 4 minutes and the
green ‘Ready’ indicator light will illuminate.
The green ‘Ready’ indicator light will cycle on
and off during use indicating the appliance is
maintaining the selected temperature.
Fig.1
Note
When cooking crêpes, preheat cooking plate on
temperature setting 2 then pour a small amount of
batter onto the centre of the cooking plate. Quickly
spread the batter in circular movements using the
batter spreader until desired diameter of the crêpe is
achieved. (Fig 1-4)
A selection of pancakes, pikelets and hotcakes
can also be made on the Breville Crêpe Creations
using recipe ideas on Pages 10 – 16.
Note
6
Fig.2
Fig.3
Fig.4
Loading...