Conical Burr Grinder™
Instruction Booklet Livret d’instructions
BCG450XL /A
CONGRATULATIONS
CONTENTS
on the purchase of your new Breville Conical Burr Grinder™
4 Breville recommends safety first
6 Know your Breville Conical Burr
Grinder™
8 Operating your Breville Conical Burr
Grinder™
10 Care & cleaning your Breville Conical
Burr Grinder™
14 One year limited warranty
BREVILLE RECOMMENDS SAFETY FIRST BREVILLE RECOMMENDS SAFETY FIRST
We at Breville are very safety conscious. We design and manufacture consumer products with the
safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree
of care when using any electrical appliance and adhere to the following precautions:
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS
Carefully read all instructions before •
operating and save for future reference.
To protect against electric shock, do not •
immerse the grinder, plug or cord in water
or any other liquid.
Remove any promotional stickers or •
packaging materials before using the
coffee grinder for the first time.
Do not place the appliance near the •
edge of a bench or table during
operation. Always use the appliance
on a dry, level surface.
To turn the appliance off, remove the plug •
from the power outlet. Remove the plug
when the appliance is not being used and
before cleaning.
The Coffee Grinder should not be •
switched on until the bean container
and lid are locked into position in the
Grinding Chamber.
Do not leave the appliance unattended •
when in use.
Do not move the grinder whilst in •
operation.
Do not place this appliance on or near •
a hot gas or electric burner, or where it
could touch a heated oven.
Do not use on metal surfaces, for •
example, a sink drain board.
Do not use on an inclined surface.•
Do not operate this appliance for longer •
than 2 minutes at a time as this could
cause overheating. Allow to cool for at
least 2 minutes after each use. Allow
appliance to cool down for 10-15 minutes
after long operation.
Keep the appliance clean. Follow •
the cleaning instructions provided in
this book.
Avoid contacting moving parts•
The use of attachments not recommended •
or sold by the manufacturer may cause
fire, electric shock or injury.
Check Hopper for presence of foreign •
objects before using.
This appliance has a polarized plug (one •
blade is wider than the other). To reduce
the risk of electric shock, this plug will fit
in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. Do not modify the
plug in any way.
FOR ALL ELECTRICAL
APPLIANCES
Fully unwind the cord before use.•
Do not let the cord hang over the edge •
of a table or counter, touch hot surfaces
or become knotted.
The appliance is not intended for use by •
young children or infirm persons unless
they have been adequately supervised
by a responsible person to ensure that
they can use the appliance safely.
Young children should be supervised •
to ensure that they do not play with the
appliance.
It is recommended to regularly inspect •
the appliance. Do not use the appliance
if power supply cord, plug or actual
appliance becomes damaged in any
way. Return the entire appliance to the
nearest authorised Breville service centre
for examination and/or repair.
This appliance is for household use only. •
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors.
The installation of a residual current •
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA
be installed in the electrical circuit
supplying the appliance. See your
electrician for professional advice.
TO ENSURE CONTINUED
!
PROTECTION AGAINST
ELECTRIC SHOCK, CONNECT
TO PROPERLY GROUNDED
OUTLETS ONLY.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
5
KNOW
your Breville Conical Burr Grinder™
KNOW YOUR BREVILLE CONICAL BURR GRINDER™
Bean container
(removable)
holds up to 5 oz of
coffee beans
Bean Container
Lid
with transparent
window
Stylish stainless
steel design
Tidy cord storage
Non-slip feet
Grind selector
control
with suggested
coffee style settings
Conical burr
grinder
inside the Grinding
Chamber
Touch activated
start/stop button
Timer Selector Dial
7
OPERATING
OPERATING YOUR BREVILLE CONICAL BURR GRINDER ™
your Breville Conical Burr Grinder™
Before first use
Before first use, remove any promotional
stickers or packaging material attached to
your coffee grinder.
Remove the Bean Container, Bean 1.
Container Lid and Ground Coffee
Container and wash in warm soapy water
with a soft cloth. Rinse and dry thoroughly.
Before each use, ensure Grinding
Chamber and Ground Coffee Container
are clean and empty.
Remove the Burr Grinder inside the 2.
Grinding Chamber by gripping the small
inner black plastic frame and pulling out
the top ring.
Using a soft cloth, wipe off any excess 3.
protecting oil from the Burr Grinder and
place it back into the Grinding Chamber.
Place the Bean Container into the 4.
Grinding Chamber so the ‘ALIGN’ arrow
on the Bean Container aligns with the
‘ALIGN’ arrow on top left-hand side of
the Grinder. Turn the Bean Container
clockwise to lock into position.
Measure the desired quantity of whole 5.
coffee beans or spices directly into the
Bean Container and cover with Bean
Container lid.
Plug the Grinder into a 110v 6.
power outlet.
To select the desired fineness of grind, 7.
rotate the Bean Container and align the
white marker on the front panel of the
Grinder with one of the following settings:
COARSE – Percolator
MEDIUM – French Press
FINE – Filter
EXTRA FINE – Espresso
SUPER FINE – Turkish
NOTE:
In order to remove any excess
protecting oils from the Burr
Grinder, it is necessary to grind
1.75 oz (50g) of coffee beans on the
Super Fine (Turkish) setting. Discard
this initial ground coffee.
Rotate the Timer Selector Dial to select 8.
the desired grinding time.
Press the ‘START’ button on the front 9.
of the Grinder to begin grinding. The
Coffee Grinder will begin grinding
the coffee/spices directly into the
Ground Coffee Container and will stop
automatically when grinding is complete.
To stop the grinding cycle at any time,
push the ‘START’ button again. If the
‘START’ button is pressed again, the
grinder will start from the beginning of
the timed cycle.
Remove the plug from the power outlet.10.
Gently tap the side of the Grinder, above 11.
the Ground Coffee Container, so that
any grinds remaining in the release
chute are released into the Ground
Coffee Container.
Remove the Bean Container, Bean 12.
Container Lid and Ground Coffee
Container and wash in warm soapy
water with a soft cloth. Rinse and
dry thoroughly.
Wipe the Grinding Chamber with a 13.
soft dry cloth and replace the Bean
Container, Bean Container Lid and
Ground Coffee Container back
into position.
Rewind the power cord into the cord 14.
storage area located under the
Grinder base.
9