QUAD BLADE FOOD
PROCESSOR
OWNER’S MANUAL Model BP101H2
120V., 60Hz., 800 Watts
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1 (800) 798-7398
Model BP101H2
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO OPERATING LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, N.Y. 12901. If the appliance is found to be defective in material or workmanship, EUROPRO Operating LLC will repair or replace it free of charge. Proof of purchase date and $14.95 to cover the cost of return shipping and handling must be included.*
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with item. We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
OWNERSHIP REGISTRATION CARD
Please fill out and mail the product registration card within ten (10) days of purchase. The registration will enable us to contact you in the unlikely event of a product safety notification. By returning this card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
RETURN TO EURO-PRO OPERATING LLC, 94 Main Mill Street, Door 16, Plattsburgh, N.Y. 12901
______________________________________________________________________BP101H2
Appliance model
______________________________________________________________________
Date purchased |
Name of store |
______________________________________________________________________
Owner’s name
______________________________________________________________________
Address |
City |
State |
Zip Code |
Printed in Turkey |
|
13 |
|
CLEANING & MAINTENANCE
CAUTION: Make sure that the unit is unplugged from power source and control button is on “OFF” before inserting or removing any attachments and before cleaning.
Re-settable Thermal Safety Device
Your Bravetti Platinum Pro Food Processing Center has been designed with a unique safety system which prevents damage to the unit’s motor and drive system, should you inadvertently overload your appliance. The safety system will automatically cut the electric power to the appliance when the device senses an overload or excessive temperature in the motor or drive system. Should this occur during use and the appliance stops functioning, following is the re-setting procedure:
1.Turn the “ON/OFF” speed control to the “OFF” position
2.Unplug the unit from the wall receptacle.
3.Remove and empty the processor bowl. Ensure that no food is jamming the cutting blades or attachments.
4.Allow the appliance to cool down for a minimum of 30 minutes.
5.Re-install the processor bowl and re-plug appliance in the wall outlet.
6.Proceed to use the appliance as before. Should the appliance still fail to operate, turn the “ON/OFF” speed control to the “OFF” position and unplug from the wall outlet. Allow the appliance to cool down for an additional 1 to 2 hours. After this time has passed, repeat the restart procedure, steps 5 and 6 above.
IMPORTANT SAFEGUARDS
Read Instruction Manual Before Use
When using electrical appliances, basic safety precautions should always be followed, including the following:
1.Read all instructions before using the appliance. It is suggested that you keep these instructions in a safe place for future reference.
2.Your voltage must correspond to the voltage printed on the bottom of the appliance.
3.To protect against electrical shock, do not immerse the motor housing (base), cord, or plug in water or other liquid.
4.Close supervision is necessary when the appliance is used by or near children.
5.Unplug appliance from outlet when not in use, before putting on or taking off parts and before cleaning.
6.Avoid touching moving parts at all times.
7.Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to EURO-PRO Operating LLC for examination, repair, electrical or mechanical adjustment.
8.The use of attachments including canning jars not recommended by the manufacturer may cause fire, electric shock or injury to persons.
9.Do not use outdoors.
10.Do not let cord hang over edge of table or counter or touch hot surfaces.
11.Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the food processor is not running.
12.Blades are sharp. Handle carefully. When handling the chopper blades
always hold it by the plastic hub.
13.To reduce the risk of injury, never place cutting blades or discs on the base without first putting bowl properly in place.
14.Be certain cover is securely locked in place before operating appliance.
15.Never feed food by hand. Always use food pusher.
16.Do not attempt to by-pass the cover interlock mechanism.
17.Always operate food processor with the cover in place.
18.Always operate the blender with the cover in place.
19.When blending hot liquids, remove the center piece of the two-piece blender cover.
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
12 |
1 |
REV. 01/05A |
|
Loading...