Braven STRYADE 360 Instruction Manual

INSTRUCTION MANUAL FOR BRAVEN STRYADE 360

WARNINGS

This appliance is intended for domestic household use only and should not be used for any other purpose
or in any other application, such as for non domestic use or in a commercial environment.

I. Precautions

1. Please store and use this product at the ambient temperature;

2. Do not expose this product to the rain or damp surroundings;

3. Prevent this product from falling that could result in serious damage;

4. Do not dismantle, repair or modify this product on your own;

5. In order to avoid any risk, do not dispose this product inappropriately or toss it into the fire as there is a

built-in lithium battery.

II. Considerate Hints

1. Do not turn up the volume to a high level constantly as this could shorten the service life of this product or

impair your hearing;

2. When encountering any fault during operation, please cut off the power supply and disconnect the USB

cable to prevent further damage to the speaker or other components;

3. The Bluetooth transmission range or connectivity could be affected by low battery power. In that case,

please recharge immediately.

4. Please remove audio cables for the use of Bluetooth

III. Functional buttons

Micro USB Port

AUX IN Port

USB Power Port

• Click / to pause during Bluetooth play and click / to play during Bluetooth pause. Click to receive

• Press – shortly to decrease the volume.,Press and hold – for 1.5 seconds to select songs upwards

• Press + shortly to increase the volume,press and hold + to select songs downwards

• Keep pushing /

Function
Button

calls at Bluetooth state. Hold down the button to refuse the calls.

1.5 seconds

to turn ON/OFF the speaker

IV. Bluetooth function

1. Turn on the speaker. The blue indicator light will flash to detect nearing Bluetooth enabled devices. The

blue indicator light will go out and speaker auto-turn off if no Bluetooth device is detected within 5

minutes.

2. Pair the speaker with the desired Bluetooth device.

3. Play/pause as desired by pressing /

4. When you want to play music or a movie from another Bluetooth device, disconnect and restart the

Bluetooth speaker. Then re-pair both devices.

5. This speaker can only connect with one Bluetooth device at the same time