Page 1
WATERPROOF PORTABLE BLUETOOTH® SPEAKER
USER MANUAL
Page 2
GET TO KNOW YOUR BRV-360
POWER ON / OFF
PLAY / PAUSE
ANSWER / END CALL
POWER STATUS LE D
BLUETOOTH PAIRING
VOICE CONTROL
BATTERY LEVEL INDICATOR LED
Green=50-100% Yellow=20-50% & Red=0-20%
VOLUME DOWN
SKIP BACK (press and hold)
VOLUME UP
SKIP FORWARD (press and hold)
MIRCO-USB
CHARGING PORT
3.5 MM INPUT
EXTERNAL USB
CHARGING PORT
(remains attached, must be secured tightly
I/O PORT COVER
to speaker for waterproofing)
ENGLISH 1
Page 3
POWER AND BLUETOOTH® PAIRING
1. Press the Power button for 2-3 seconds to turn your BRV-360 on & off.
®
2. Activate Bluetooth
your device for further instruction).
3. Press and hold the Bluetooth
cue signals.
4. Select BRV-360 in your device’s Bluetooth® settings to establish the connection.
5. If your devices requests a passcode to connect, enter “0 0 0 0”.
6. Cancel Bluetooth
cue signals.
Your BRV-360 remembers the last eight devices it paired with. Tap BRV-360 in your
Bluetooth
NOTE: If your BRAVEN is powered on with an inactive Bluetooth® connection for
30 minutes, it will automatically power off. Turn your BRAVEN on again by holding the
power button for 2-3 seconds until you hear the audio cue.
®
device menu to reconnect.
in the settings of your mobile device (check the user manual of
®
pairing button for 2-3 seconds until the audio
®
pairing mode by pressing the Bluetooth® button until the audio
VOLUME AND PLAY BACK CONTROL
Increase volume by short pressing the “+” button or decrease volume by pressing the
“–” button. An audio cue will indicate when you’ve reached max volume.
Skip to the next trap by long pressing the “+” button or play the previous track by long
pressing the “–” button.
ENGLISH 2
Page 4
CHARGING YOUR BRAVEN
Before using your BRV-360 for the first time, fully charge your speaker until the battery
indicator light turns green.
Charge your BRV-360 by inserting the included micro-USB cable into a wall adapter or
computer. Next, plug the cable into the charging port on the back of the BRV-360.
CHARGING EXTERNAL DEVICES
Your BRAVEN can charge most USB enabled smartphones and tablets using the
1A full-sized USB Port.
To use external charging:
1. Turn your BRAVEN on.
2. Plug your USB power cable into the USB portion the back of your BRAVEN.
3. Insert the other end of the cable into your device to immediately begin charging.
SPEAKERPHONE
Press the “Play” button once on your BRAVEN to answer and end calls over the
speakerphone.
ENGLISH 3
Page 5
WATERPROOF FEATURES
The BRV-360 is IP67 waterproof certified and designed to withstand rainfall, waterjets,
splashing or dunks in 3ft / 1m of water for up to 30 minutes.
IMPORTANT: Ensure your BRV-360 is prepared for use in a wet environment by removing
all cable connections and tightly sealing the port cover. If the cover is not securely
fastened, your BRAVEN may sustain water damage.
USING BRAVEN VOICE CONTROL
Use your smartphone’s virtual personal assistant by double pressing the Bluetooth® button
on your BRAVEN. Give a command through the speaker to make calls, dictate messages
and more.
RESETTING YOUR BLUETOOTH® CONNECTION
Reset the Bluetooth® pairing list to your BRV-360 by press and holding the “+” button
and “–” button for 5 seconds until the speaker shuts down.
ENGLISH 4
Page 6
WARNINGS, CAUTION & LEGAL INFORMATION
To reduce the risk of fire or electric shock,
do not expose the BRAVEN to rain or
moisture while charging. The BRAVEN
should not be exposed to dripping or
splashing, and objects filled with liquids,
such as vases, should not be placed on or
near it while being charged or charging other
devices. As with any electronic products,
use care not to spill liquids into any part of
the product. Liquids can cause a failure
and/or a fire hazard. The power supply must
be used indoors only. Make no modifications
to the product or accessories. Unauthorized
alterations may compromise safety,
regulatory compliance, and system
performance, and will void the warranty.
Do not place any flame sources, such as
lighted candles, on or near the BRAVEN. The
BRAVEN contains small parts that may be a
choking hazard and is not suitable for children under age 3. Do not continue charging
the battery if it does not reach full charge
within the specified charging time. Overcharging may cause the battery to become
hot, rupture, or ignite. If you see any heat
deformation or leakage, properly dispose of
the battery. Do not attempt to charge the
battery in temperatures outside the range of
32°-104°F (0°-40°C). If the battery begins
to leak, do not allow the liquid to come in
contact with your skin or eyes. If contact
has been made, wash the affected area with
plenty of water and seek medical attention
immediately. Do not expose the product or
battery to excessive heat, including direct
sunlight or fire and storage or use inside cars
in hot weather, where it can be exposed to
temperatures in excess of 115°F (60°C).
Doing so may cause the battery and power
supply to generate heat, rupture, or ignite.
Using the product in this manner also may
result in a loss of performance and a
shortened life expectancy. Extended
exposure to direct sunlight may damage the
external appearance and material qualities.
Do not step on, throw, or drop batteries or
the power supply or device, or expose them
to a strong shock. Do not pierce, crush,
dent, or deform the batteries or power
supply in any way. If either becomes
deformed, properly dispose of it. Do not
short-circuit batteries. Do not attempt to
service the BRAVEN yourself. Opening or
removing covers may expose you to
dangerous voltages or other hazards and will
void the manufacturer’s warranty. To prevent
risk of fire or electric shock, avoid
overloading wall outlets, extension cords, or
integral convenience receptacles. Your
®
Bluetooth
device (mobile phone, music
player, tablet, laptop, etc.) must support the
A2DP Bluetooth
wirelessly with your new BRAVEN speaker.
The A2DP profile is supported by most
recent mobile products with built-in
Bluetooth
your device’s user manual for details and
instruction regarding the Bluetooth
it supports. This device complies with part
15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received,including interference that may
cause undesired operation. NOTE: This
equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or more
of the following measures: — Reorient or
relocate the receiving antenna. — Increase
the separation between the equipment and
receiver. — Connect the equipment into
an outlet on a circuit different from that to
which the receiver is connected. — Consult
the dealer or an experienced radio/TV
technician for help. CAUTION: Any changes
or modifications not expressly approved by
the party responsible for compliance could
void the user’s authority to operate the
equipment. FCC RADIATION EXPOSURE
STATEMENT: This device complies with FCC
radiation exposure limits set forth for an
uncontrolled environment. This device
complies with Industry Canada licenseexempt RSS standard(s). Operation is
subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device.
®
profile in order to work
®
capability. Please refer to
®
profiles
Under Industry Canada regulations, this
radio transmitter may only operate using an
antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry
Canada. To reduce potential radio
interference to other users, the antenna
type and its gain should be so chosen that
the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for
successful communication. Lithium Battery
installed is not intended to be replaced by
the USER CAUTION: Danger of explosion if
battery is incorrectly replaced. Replace only
with the same or equivalent type. Where
the MAINS plug is used as the disconnect
device, the disconnect device shall remain
readily operable. The device meets the
exemption from the routine evaluation limits
in section 2.5 of RSS 102 and compliance
with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and
compliance.
Correct Disposal of this product.
This marking indicates that this product
should not be disposed with other household
wastes throughout the EU. To prevent
possible harm to the environment or human
health from uncontrolled waste disposal,
recycle it responsibly to promote the
sustainable reuse of material resources.
To return your used device, please use the
return and collection systems or contact the
retailer where the product was purchased.
This product complies with
California Energy Commission efficiency
standards for consumer battery chargers.
ENGLISH 5
Loading...