Bose QuietComfort Acoustic Noise Cancelling Headset User Manual

QuietComfortTMAcoustic Noise Cancelling® Headset

Owner's Guide

October 30, 2001

AM254864_03_V.pdf

AM183562_04_V.pdf October 30, 2001 1

DECLARATION OF CONFORMITY

We, the offerer:

Bose® Corporation, The Mountain, Framingham, MA

01701-9168 USA

acknowledge our sole responsibility,

that the product:
Kind of equipment: Headphones
Type designation: QuietComfortTM Acoustic Noise
Cancelling® headset

In accordance with EMC Directive 89/336/EEC

and Article 10(1) of the Directive,

is in compliance with the following

norm(s) or document(s):

Technical regulations: EN50081-1, EN50082-1

Accredited by:

Bose Corporation, The Mountain, Framingham, MA

01701-9168 USA

15 April 2000

Bose Products B.V.
Nijverheidstraat 8, 1135 GE Edam
The Netherlands

Vice President Europe

Manufacturer’s authorized

Nic Merks

EU representative

2 October 30, 2001 AM254864_03_V.pdf5

Uses and Reminders

Y our QuietComfortTMAcoustic

®

Noise Cancelling

Thank you for purchasing the Bose® QuietComfort
Acoustic Noise Cancelling headset. Advanced design,
integrated technologies, and high quality materials
enable the headset to provide you with clearer, more lifelike
sound reception, while reducing unwanted noise.

Wearing it comfortably and effectively

Notice the marking L or R on the headband just above

each earcup. They indicate the proper position (L for left
ear, R for right) to ensure a good fit and performance.

Put the headset on and adjust it so the headband rests

gently on your head and the earcushions fit snugly (an
effective seal) and comfortably around your ears (with your
ears completely inside the ear cushions).

Remove any jewelry or earwear that affects the comfort

and fit of the headset.

Using your headset

The headset has two volume settings – Hi and Lo. These
settings are only volume levels for listening to audio and do
not impact the noise reduction technology.

For noise reduction technology only, turn the unit on Hi or
Lo and do not plug the headset into any audio source.

For audio use, begin listening in the Lo setting. Then adjust
the volume on the audio source. For more volume, try the
Hi setting. First turn down the volume on the audio source,
then switch to the Hi setting. Finally, re-adjust the volume
on the audio source.

The headset can be used with a variety of audio sources:
CD, DVD, MP3, laptop computers, and home stereo.

Headset

AM183562_04_V.pdf October 30, 2001 3