Page 1
Set Up Guide • Guía de configuración • Guide de configuration
Page 2
Important Safety Instructions
Please read this guide
Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and
operate your system properly and enjoy its advanced features. Please save this guide for future reference.
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the
presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle, as marked on the system, is intended to alert
the user to the presence of important operating and maintenance instructions in this owner’s
guide.
WARNING: Contains small parts which may be a choking hazard. Not suitable for children under
age 3.
WARNINGS:
• To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.
• Do not expose this apparatus to dripping or splashing, and do not place objects filled with
liquids, such as vases, on or near the apparatus. As with any electronic products, use care not
to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.
• To prevent electric shock, match the wide blade of the line cord plug to the wide slot of the AC
(mains) receptacle. Insert fully.
• Do not place any naked flame sources, such as lighted candles, on or near the apparatus.
CAUTIONS:
• Make no modifications to the system or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance.
• Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme
volume when using headphones, especially for extended periods.
NOTES:
• The product label is located on the bottom or the back of the product.
• Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device
shall remain readily operable.
• The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation
vehicles, or on boats.
• This product is intended to be used only with the power supply provided.
• The speaker wire and interconnect cables included with the system are not approved for in-wall installation. Please check your local building codes for the correct type of wire and cable required for in-wall
installation.
• Changes or modifications not expressly approved by Bose Corporation could void the user’s authority
to operate this equipment.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
2 - English
Page 3
Important Safety Instructions
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been dam-
Part Name
PCBs X O O O O O
Metal parts X O O O O O
Plastic parts O O O O O O
Speakers X O O O O O
Cables X O O O O O
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement of GB/T 26572.
X: Indicates that said hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limit requirement of GB/T 26572.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
aged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Please dispose of used batteries properly, following local regulations. Do not incinerate.
This symbol means the product must not be discarded as household waste, and should be
delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps
protect natural resources, human health and the environment. For more information on disposal
and recycling of this product, contact your local municipality, disposal service, or the shop
where you bought this product.
Bose Corporation hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC and all other applicable EU
directive requirements. The complete declaration of conformity can be found at:
www.Bose.com/compliance
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
(CR(VI))
Polybrominated
Biphenyl (PBB)
Polybrominated
diphenylether (PBDE)
English - 3
Page 4
Important Safety Instructions
Please complete and retain for your records.
The serial and model numbers can be found on the bottom panel of the product.
Lifestyle® SoundTouch™ model: _____________________________________________________
Control console serial number: _____________________________________________________
Acoustimass® serial number: _______________________________________________________
Soundbar serial number: __________________________________________________________
Purchase date: ___________________________________________________________________
Please keep your receipt together with this Setup Guide and the Operating Guide.
Date of manufacture
The four bolded digits in the serial number indicate the date of manufacture. The first digit is the year of
manufacture; “5” is 2005 or 2015. Digits 2-4 are the month and date; “001” is January 1 and “365” is
December 31.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road,
China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose GP, Castleblayney Road, Carrickmacross, Ireland
Taiwan Importer: Bose Taiwan Branch, Room 905, 9F, Worldwide House, 131 Min Sheng East Rd, Section
3, Taipei, Taiwan, 105
App Store is a service mark of Apple Inc.
Amazon, Kindle and Fire are trademarks of Amazon.com, Inc. or its affiliates.
Android and Google Play are trademarks of Google Inc.
Blu-ray Disc
The Bluetooth
of such marks by Bose Corporation is under license.
™
and Blu-ray™ are trademarks of the Blu-ray Disc Association.
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from Digital
Theater Systems, INC. DTS, the Symbol, & DTS and the Symbol together are registered
trademarks, and DTS Digital Surround is a trademark of DTS, Inc. ©DTS, Inc. All Rights
Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
iHeartRadio is a registered trademark of iHeartMedia, Inc.
This product incorporates Spotify software which is subject to 3rd party licenses found here:
www.spotify.com/connect/third-party-licenses.
Spotify is a registered trademark of Spotify AB.
SoundTouch and the wireless note design are trademarks of Bose Corporation in the U.S. and other
countries.
Wi-Fi is a registered trademark of Wi-Fi Alliance
© 2015 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise
used without prior written permission.
4 - English
®
Page 5
Contents
Introduction
About your Lifestyle® SoundTouch™ system ................................................ 6
SoundTouch™ ..................................................................................................... 6
About your SoundTouch™ wireless adapter .......................................... 6
Unpacking the System
Carton contents ................................................................................................. 7
Accessories boxes ............................................................................................. 7
Cables and power cords box ..................................................................... 7
Essentials box ............................................................................................. 8
Control console box ................................................................................... 8
Setting Up the Soundbar
Connecting the soundbar ................................................................................ 9
Attaching the optional extension feet to the Soundbar ............................ 12
Setting Up the Control Console
Connecting the control console ...................................................................... 13
Setting Up the Acoustimass® Module
Connecting the Acoustimass module ........................................................... 16
Starting up the System
Installing the remote control’s batteries ...................................................... 18
Powering on the system .................................................................................. 19
Completing setup with UNIFY® ....................................................................... 20
Care and Maintenance
Troubleshooting ................................................................................................ 21
Contacting customer service .......................................................................... 21
Appendix: Using UNIFY® to connect SoundTouch™
Adding the system to your Wi-Fi® network .................................................. 22
To add the system to an existing SoundTouch™ account .................. 22
Download and install the SoundTouch™ app ........................................ 22
English - 5
Page 6
Introduction
About your Lifestyle® SoundTouch™ system
The Lifestyle® SoundTouch™ system is elegant and easy-to-use, delivering superior performance for both music and video. This guide provides step-by-step
instructions for setting up your new system.
Your new home entertainment system includes a soundbar, control console,
Acoustimass
®
module, SoundTouch™ wireless adapter and a universal remote
control.
SoundTouch™
With SoundTouch™, you can stream Internet radio, music services and your music
library. If you have Wi-Fi
room you want. Refer to the operating guide for SoundTouch
®
at home, you’re ready to enjoy your favorite music in any
™
features.
About your SoundTouch™ wireless adapter
The SoundTouch™ wireless adapter in the Essentials box enables SoundTouch™
and Bluetooth
adapter is part of the UNIFY
until prompted by UNIFY
For system and SoundTouch
®
technology on your entertainment system. Setting up your wireless
®
setup process. Do not connect your wireless adapter
®
. See page 20.
™
features, refer to the operating guide.
6 - English
Page 7
Unpacking the System
Carton contents
Carefully unpack the carton and confirm that the following parts are included. Save
the carton and packaging materials for transporting or storing the system.
Note: If part of the system is damaged, do not use it. Contact your authorized
®
Bose
dealer or Bose customer service. Refer to the contact sheet in the
carton.
Soundbar
Acoustimass
®
module
Accessories boxes
Each box is identified by an icon on the box. These icons appear in the system
setup steps to indicate where parts are located.
Cables and power cords box
Audio input cable AC power cord
Use the appropriate power cord for your region.
AM antenna
English - 7
Page 8
Unpacking the System
Essentials box
SoundTouch™ series II
wireless adapter
FM antenna IR emitter cable Stereo audio cable
USB cable USB drive (for system
ADAPTiQ® audio calibration
headset
updating only)
Operating guide
Acoustimass module feet
and Soundbar feet
Control console box
8 - English
Control console
Power supply
HIGH SPEED HDMI
Remote control and
Batteries
™
cable
Page 9
Setting Up the Soundbar
Connecting the soundbar
The Lifestyle® SoundTouch™ entertainment system uses the reflective surfaces of
your room to deliver wide, spacious sound. For best sound quality, the soundbar
should not be placed inside a cabinet, or diagonally in a corner.
To avoid wireless interference, keep other wireless equipment away from the system. Place the system outside of and away from metal cabinets, away from other
audio/video components and away from direct heat sources.
Note: Remove all protective films. These may affect acoustic performance if left in
place.
What you need:
Soundbar
1. Lay the soundbar grille-side down on the table in front of your TV.
Tip: Lay the soundbar on a soft surface to protect it from being damaged.
2. Insert the audio input cable into the Audio In connector on the soundbar with
the flat surface and arrow on the plug facing up.
Audio input
cable
Audio input cable
Power cord
Soundbar
OPTIONAL:
speaker array
extension feet
English - 9
Page 10
Setting Up the Soundbar
3. Insert the small end of the power cord into the Power connector.
Note: Do not plug the power cord into an AC power outlet until instructed to
do so.
Power cord
4. Arrange the cables as needed for your setup location.
OPTIONAL: Secure cables under the clips in the channel running along the length
of the soundbar and attach the extension feet (page 12).
Channel
Cable clip
10 - English
Page 11
Setting Up the Soundbar
5. Turn the soundbar over and place it in front of your TV with the speaker grille
facing into the room.
English - 11
Page 12
Setting Up the Soundbar
Attaching the extension feet to the
Soundbar (optional)
Attach the optional extension feet to raise the soundbar.
1. Turn the soundbar upside down onto a soft surface to protect it from being
damaged.
2. Attach the extension feet to the bottom of the soundbar.
Optional extension feet
3. Place the soundbar on its feet.
Wall mounting the soundbar
You can mount the soundbar on a wall. To purchase the WB-135 Wall Mount Kit,
contact your local Bose dealer or visit www.Bose.com
CAUTION: Do not use any other hardware to mount the soundbar.
12 - English
Page 13
Setting Up the Control Console
Connecting the control console
What you need:
Control console
1. Place the control console on a flat, stable surface near your TV.
Note: Until your system is completely installed, keep the control console
positioned for easy access to the rear connector panel.
Power supply
Control console
HIGH-SPEED
HDMI™ cable
Power cord
English - 13
Page 14
Setting Up the Control Console
2. Insert one end of the HIGH-SPEED HDMI™ cable into an HDMI IN connector
on your TV.
If an HDMI cable is already connected to an HDMI connector on your TV, you
can disconnect the other end and use this cable.
Note: If you plan on viewing 3D content, use the supplied
HIGH-SPEED HDMI cable.
3. Insert the other end of the HDMI cable into the HDMI OUT Video to TV
connector on the control console.
14 - English
HDMI OUT
Video to TV
Page 15
Setting Up the Control Console
4. Insert the soundbar’s audio input cable into the Audio OUT connector on the
control console with the flat surface and arrow on the plug facing up.
Note: Do not connect the audio input cable to a Bose link connector.
Audio OUT
5. Insert the power supply output cord into the Power connector.
Power
AC power cord
Power supply
output cord
6. Insert a power cord into the power supply.
7. Plug the power cords from the soundbar and the control console into an AC
(mains) power outlet.
English - 15
Page 16
Setting Up the Acoustimass® Module
Connecting the Acoustimass® module
What you need:
Acoustimass module
CAUTION: Choose a stable and level surface for the Acoustimass module.
Vibration can cause the module to move, particularly on smooth
surfaces like marble, glass or highly polished wood.
1. Attach the rubber feet to the bottom of the acoustimass module.
2. Insert the small end of the power cord into the Power connector.
Rubber feet
Rubber foot
Bottom panel
Power cord
16 - English
Power
Page 17
Setting Up the Acoustimass® Module
3. Place the Acoustimass® module according to the following guidelines:
• For best sound quality, stand the Acoustimass module on its feet along the
same wall as your TV, or along any other wall in the front third of the room.
• The front opening of the module can face any direction.
• Make sure there is an AC (mains) power outlet nearby.
CAUTION: Do not operate the Acoustimass module on its front end, back end,
Note: Remove all protective films. These may affect acoustic performance if left in
4. Plug the Acoustimass module’s power cord into an AC (mains) power outlet.
side, or top.
place.
English - 17
Page 18
Starting Up the System
What you need:
SoundTouch™ series II
wireless adapter
Remote control
and batteries
ADAPTiQ® audio
calibration headset
USB cable
Before you start:
• Do not connect any devices to the control console until instructed by UNIFY®.
• Make sure the soundbar and Acoustimass
®
module are in their final positions.
Installing the remote control’s batteries
1. Slide open the battery compartment cover on the back of the remote control.
2. Install the four provided AA (IEC LR6) batteries. Match the + and – symbols on
the batteries with the + and – markings inside the compartment.
3. Slide the battery cover back into place.
18 - English
Page 19
Starting Up the System
Powering on the system
1. Press the power button on the control console.
Note: The system operates in a power saving mode when it is off to keep
energy consumption low, so it may take several seconds to start.
Status indicator
Power button
2. Check that the status indicator on the soundbar is off.
Note: If the status indicator is blinking amber, there is no wireless connection
between the speaker and the Acoustimass
shooting” in the operating guide.
Status indicator
3. Power on your TV.
4. Using your TV’s remote control, change the TV input to the one that is
connected to your Lifestyle
®
SoundTouch™ system.
®
module. Refer to “Trouble-
English - 19
Page 20
Starting Up the System
Completing setup with UNIFY
®
The UNIFY intelligent integration system guides you through the initial process of
setting up your system. It guides you through choosing the right cables and inputs,
and programming the Bose
®
remote to operate your connected devices.
Follow the instructions on your TV screen to complete the following:
• Select your language.
• Run the ADAPTiQ
• Connect the SoundTouch
®
audio calibration system.
™
wireless adapter to your system and your Wi-Fi®
network using a smartphone or tablet.
Note: If you are unable to complete setup with a smartphone or tablet,
see “Appendix: Using UNIFY
®
to set up SoundTouch™” on page 22.
• Connect and set up external audio/video devices
• Configure your Bose
®
remote to control your connected devices.
After completing the initial setup, you can use the UNIFY system at any time to
change your system setup. Refer to the operating guide.
20 - English
Page 21
Troubleshooting
Care and Maintenance
If you experience any difficulties during the setup process, such as an
unrecognized device remote or a connection error, go to the UNIFY
correct or change part of your system setup. See “Changing Your System Setup”
in the operating guide.
Refer to “Troubleshooting” in the operating guide.
®
menu and
Contacting customer service
For additional help using the system:
• Visit SoundTouch.com
• Contact Bose
®
Customer Service. Refer to the contact sheet in the carton.
English - 21
Page 22
Appendix: Using UNIFY® to set up SoundTouch™
Adding the system to your Wi-Fi® network
You can set up the SoundTouch™ wireless adapter using Network Setup in the
UNIFY menu if you are unable to complete setup with a smartphone or tablet.
1. Press Setup on the control console.
2. Select Network Setup in the UNIFY menu.
3. Press OK on the remote.
4. Follow the onscreen instructions to connect the adapter.
To add the system to an existing SoundTouch™ account
If you have already set up SoundTouch™ for another system, you do not need to
download the SoundTouch
1. On your smartphone, tablet or computer select the SoundTouch
to launch the app.
2. Select EXPLORE > SETTINGS > Systems > ADD SYSTEM to add another
system.
3. Select IT IS ALREADY CONNECTED.
Download and install the SoundTouch™ app
If this is your first time setting up a SoundTouch™ system, you must install the app.
On your smartphone or tablet, download the SoundTouch
1. On your smartphone or tablet, download the SoundTouch
™
app again.
™
icon
™
controller app.
™
controller app.
Bose® SoundTouchTM
controller app
• iOS users: download from the App Store
• Android
• Amazon Kindle Fire users: download from the Amazon Appstore for Android
2. Select
3. Click CONTINUE.
The SoundTouch
4. Select IT IS ALREADY CONNECTED.
5. Follow the instructions in the app to complete setup, including creating a
SoundTouch
22 - English
™
users: download on the Google Play™ store
to launch the app.
™
system setup screen appears.
™
account, adding a music library and music services.
Page 23
English - 23
Page 24
©2015 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM744560 Rév. 00
Loading...