Bose EP22-D Datasheet
ControlSpace® EP22-D
2-in/2-out Dante™ Endpoint
Product Description
The Bose® ControlSpace® EP22-D Dante endpoint is a convenient and
cost-effective way to add 2-in/2-out analog audio channels to a Dantebased networked audio system. The small form factor of the EP22-D
with PoE power capability makes it easy to locate the endpoint close to
analog devices, helping to reduce costly and interference-prone analog
wiring.
Key Features
• Small form factor, can be unobtrusively located near analog devices
• Integrated discovery, routing, conguration and control using
ControlSpace Designer™ software
• Dual power options (DC or PoE) means the EP22-D will work with
either standard or PoE Ethernet switches
• Three input gain settings for common line and microphone sources.
Channel gain is individually adjustable via ControlSpace Designer
software
• +24VDC Phantom power
• Separate analog output gains to accommodate both consumer and
professional line-level requirements
Technical Specications
TECHNICAL DATA SHEET
Applications
• Hotel ballrooms
• Conference/meeting centers
• Conference rooms
• Sports facilities
• Convention centers
• Religious and worship facilities
• Retrot applications using existing
networking cable
Audio Inputs
Input Channels Two (2) analog, balanced microphone/line level
Connectors Two (2) 3.81 mm Euroblock, 3-pin
Phantom Power +24VDC, software selectable per input
Gain Settings 0 / +25 / +40 dB, software selectable
Input Impedance > 1.8 kΩ at any gain setting
Equivalent Input Noise -115 dBu (at +40 dB gain)
Maximum Input Level +12 dBu (at 0 dB gain)
Audio Outputs
Output Channels Two (2) analog, balanced line-level,
Connectors Two (2) 3.81 mm Euroblock, 3-pin
Output Gain 0 / +10 dB, software selectable
Output Noise < –90 dBu @ 0 dB gain
Maximum Output Level +12 dBu
Output Impedance 200 ohms (100 ohms unbalanced)
Software Application
ControlSpace® Designer™ software v4.2 or later
General
Digital Conversion 48 kHz / 24-bit
System THD < 0.01 % (at any gain, input signal 3 dB below maximum)
PoE Class Class 0 802.3af PoE PD compliant
Certications FCC Part 15 Class A, CE (EN 55022 Class A)
Dimensions 1.06" H x 6.45" W x 3.45" D (27 mm x 164 mm x 88 mm)
Operating Temperature 32 °F – 104 °F (0 °C – 40 °C)
Product Code 738675-0010
with automatic muting on loss of Dante signal
OF 2
1
pro.Bose.com
ControlSpace® EP22-D
2-in/2-out Dante™ Endpoint
Connector Panel
POWER/ID indicator: Indicates power when on
and blinks when the Identify button is pressed in
ControlSpace Designer™ software
12VDC input: +12VDC @ 500mA,
center-positive polarity
(External supply not required if
used with a PoE Ethernet switch)
Dante™/ PoE network connector:
100 Mbps Dante Ethernet RJ-45
network connection
Line/Mic inputs (2):
• Balanced mic/line inputs
• +24V Phantom Power
(individually software switchable per
channel)
• Available gains of 0 / 25 / 40 dB
(individually software selectable per
channel)
TECHNICAL DATA SHEET
Line outputs (2):
• Low impedance analog outputs
– 200 ohms balanced, 100 ohms
unbalanced
• Available gains of 0dB and +10dB
(individually software selectable
per channel)
ControlSpace Designer™ software interface
Dante™ is a trademark of Audinate Pty Ltd.
OF 2
2
pro.Bose.com
Loading...