Bosch UC MCM 5100, MCM 5000m, UC MCM 5200 User Manual
Owner’s Manual
Food Processor Plus
models:
MCM 5000 UC • MCM 5100 UC
MCM 5200 UC
READ THIS MANUAL
thoroughly for important safety and operating
instructions before using this appliance.
1
IMPORTANT SAFEGUARDS
WARNING: A risk of fire and electrical shock exists in all electrical appliances and may
cause personal injury or death.
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions before using the food processor.
2. T o protect against risk of electric shock, do not put the drive unit in or under water or
other liquid.
3. This appliance is not for use by children.
4. Close supervision is necessary when any appliance is used near children.
5. Do not leave appliances unattended during operation.
6. Unplug from outlet when not in use, before putting on or taking off parts and
before cleaning.
7. T o disconnect: switch appliance of f then remove plug from power supply .
8. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas
and other utensils away from whisks, blades, disc, dough hook and/or other
moving parts during operation to reduce the risk of injury to persons and/or
damage to the appliance or its attachments.
9. Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions or is dropped or damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair or electrical or mechanical
adjustment.
10. The use of attachments not recommended or sold by the appliance manufacturer
may cause fire, electric shock or injury and is therefore prohibited.
1 1. Do not use outdoors or when standing in a damp area.
12. Do not let cord hang over edge of table or counter , or touch hot surfaces.
13. Always operate appliance with covers in place.
14. Blades are sharp. Handle carefully due to risk of injury .
15. Remove blades, hooks, whisks or discs from mixing bowl before washing.
NOTE: ALSO BE SURE TO READ THE WARNINGS AND CAUTIONS THAT ARE
PROVIDED BEFORE EACH A TT ACHMENT’S OPERA TING INSTRUCTION.
SAVE THESE INSTRUCTIONS
2
TABLE OF CONTENTS
IMPORT ANT SAFEGUARDS .................................................................. 2
T able of contents..................................................................................... 3
ABOUT YOUR FOOD PROCESSOR ...................................................... 4
Bosch Food Processor ........................................................................... 4
Unpacking............................................................................................... 4
Electrical specifications ............................................................................ 4
Before using for the first time .................................................................. 4
Getting to know your Food Processor ...................................................... 6
Power unit features .............................................................................. 6-7
Special features of mixing bowl ............................................................... 7
Getting started ................................................................................... 8-10
STANDARD A TTACHMENTS ................................................................ 10
Mixing bowl w/multifunction blade, whisk, hooks and discs................... 10
How to use multifunction blade .............................................. 10-11
Placing into operation with multifunction blade.............................. 11
How to use dough hook ................................................................ 12
How to use whipping whisk.................................................... 12-13
How to use slicing and grating discs ........................................... 14
Care and cleaning of bowl and its accessories ........................... 16
Blender with unbreakable plastic jar ........................................................ 16
How to use blender...................................................................... 17
Placing blender into operation...................................................... 18
Example of use of blender ........................................................... 18
Care and cleaning of blender........................................................ 19
Citrus Juicer........................................................................................... 19
Placing into operation with citrus juicer........................................ 20
Care and cleaning of mixing bowl with citrus juicer ...................... 20
Juice Extractor....................................................................................... 20
Placing into operation with juice extractor.................................... 21
Care and cleaning of mixing bowl with juice extractor .................. 21
SERVICE and REP AIR .......................................................................... 22
TROUBLESHOOTING ................................................................. 23
SAMPLE RECIPES .......................................................................... 24-25
Important Notes ..................................................................................... 26
BOSCH small appliance warranty ........................................................... 27
HOUSEHOLD USE ONLY
3
ABOUT YOUR FOOD PROCESSOR
Congratulations on having selected one of
the Bosch Food Processors. A series of
food processors designed to simplify
common food preparation tasks of the home
cook: stirring, beating, slicing, mincing,
grating and chopping as well as juicing.
three-quart capacity mixing bowl, cover
with integral feeding tube and pusher/
measuring cup, multifunction blade,
whipping whisk, dough hook, reversible
slicing disc, reversible coarse grating
disc, fine grating disc, 6-cup capacity
blender, citrus juicer, juice extractor
motor drive cover and spatula.
As you read through these instructions,
please pay particular attention to the
IMPORTANT SAFEGUARDS. Specific
safeguards for the attachments, as well as
warnings and cautions, are provided in each
section describing the operation of that
particular attachment.
Bosch Food Processor
The Bosch Food Processor Plus is available
in 3 models:
• The MCM 5000 UC
comprised of a two-speed electronic
power unit with integral cord storage,
three-quart capacity mixing bowl, cover
with integral feeding tube and pusher/
measuring cup, multifunction blade,
beater, dough hook, reversible slicing
disc, reversible coarse grating disc,
citrus juicer, motor drive cover and
spatula.
• The MCM 5100 UC
comprised of two-speed electronic power
unit with integral cord storage, threequart capacity mixing bowl, cover with
integral feeding tube and pusher/
measuring cup, multifunction blade,
beater, dough hook, reversible slicing
disc, reversible coarse grating disc, 6cup capacity blender, citrus juicer , motor
drive cover and spatula.
• The MCM 5200 UC
comprised of a four-speed electronic
power unit with automatic cord rewind,
Unpacking
Carefully remove the power unit from its
packaging and place it on the counter so it
is ready to use. As you remove the
accessories from the carton, check them
against figure 1 to assure that all the
standard parts are present.
Electrical Specifications
Check to make sure that the voltage on
which your food processor is to operate is
the same as specified on the rating plate.
Standard North American models have an
electrical power rating of 530-watt maximum
power rating with the attachment that draws
the most power (some attachments may
draw less power).
Before Using for the First Time
Before using any of the attachments for the
first time it is recommended they be washed,
rinsed well and dried. Of the attachments
supplied with the systems in this manual,
all parts, except the blender’s jar/blade
assembly , are dishwasher safe:
> The blender’s jar/blade assembly
should be washed under running water
and dried.
Note: It is recommended that the
blender jar/blade assembly
never be left to stand in water or
soap solution, to prevent the bearing
lubricant from being washed out.
4
MCM 5000 UC
MCM 5100 UC
MCM 5200 UC
Figure 1
5
Getting to Know Y our Food Processor
The Bosch Food Processors are comprised
of various attachments, depending on the
system purchased (see above).
Bosch engineers are continually working on
expanding the usefulness of your Bosch
Food Processor. If there is some type of
accessory in which you are interested, that
is not presently available for your Bosch
Food Processor, please either write us at:
• Bosch Small Appliances
Customer Support
BSH Home Appliances
5551 McFadden Avenue
Huntington Beach, CA 92649
or call us at:
• 1 (866) 44BOSCH
[1 (866) 442-6724]
Power Unit Features
The MCM 5000 power units have the
following features, refer to figure 2:
530-watt motor
One of the most powerful motors offered
with any food processor system.
Electronic speed control
Six-position rotary switch, on the MCM
5200, see figure 2a; four-position rotary
switch, on the MCM 5100 and MCM 5000,
figure 2b, is located at the front of the power
unit. The MCM 5200 has 4 speeds plus a
momentary pulse function and a stop
position “O/Off,” while the MCM 5200 and
MCM 5000 have 2 speeds plus a momentary
pulse function and a stop position “O/Off,”
see figure 2a.
Figure 2.
6
Built-in Safety Cutout
The Bosch Food Processors are provided
with a built-in safety cutout to protect the
motor against overheating.
If the safety cutout should open:
a. Turn the processor to the off position
“O/Off” and unplug.
b. Contact Bosch Small Appliances
Customer Support, see page 6, for
closest Bosch authorized service
center.
c. T ake, or ship, the food processor to
a Bosch authorized service center to
have the safety cutout replaced.
Safety Cover Interlock
The Bosch Food Processor incorporate in
their design a special safety feature; the
Safety Cover Interlock, figure 2c. This
feature prevents the rotary switch from
being turned from the Off position, “O/Off,”
if cover has not been placed on the bowl
properly and rotated to trip the Safety Cover
Interlock.
Safety Motor Drive Cover
Another special safety feature incorporated
in the Bosch Food Processors is the Safety
Motor Drive Cover, figure 2d. The Safety
Motor Drive Cover must be in place on the
high speed blender drive when not in use
or the motor will not start when turned to
one of its On positions, or if removed while
power unit is running will bring the power
unit to a stop.
Dual drives
The Bosch Food Processors come with
three drives:
• A high-speed drive directly coupled to
the motor, used to drive the blender and
other special accessories, located
under the Safety Motor Drive Cover,
figure 2e.
• A dual drive, figure 2f, used by bowl
accessories: one high-torque drive used
to drive dough hook, citrus juicer and
other special accessories requiring high
torque; and, a high speed drive used to
drive the multifunction blade, beater,
whipping whisk and other accessories
requiring higher speeds.
Convenient cord storage
The MCM 5200 UC model stores the cord
internally , on an automatic cord winder, see
figure 2g.
Four rubber feet
Four rubber feet provide the ultimate in
stability, while also serving to isolate the
power unit from the hard surface to minimize
noise and vibration, figure 2h.
Special features of mixing bowl
The mixing bowl has a number of special
features:
Dual feeding tube
The three-quart capacity mixing bowl comes
with two feeding tubes molded into the cover.
The small tube may be used for slicing or
grating items that you wish to stand on end.
Pusher/measuring cup
In addition to its ability to act as both a
pusher and a measuring cup, the slimmer
portion of the pusher has a hole at the
bottom to allow it top be used as a funnel
when liquids need to be added to the
mixture in the bowl. See figure 3a.
Filling tray
The MCM 5200 UC, Bosch Food
Processor, also comes with a filling tray
that can be mounted on the feeding funnel
to simplify the feeding of material into the
bowl, figure 3b.
7
Figure 3.
Getting Started
The operation of your Bosch Food
Processor is summarized below.
Specific instructions for using each of the
attachments, provided with the food
processor systems covered by this manual,
follow the summarized instructions. Please
read the specific instructions thoroughly
before using that attachment, paying
particular attention to the IMPORTANT
SAFEGUARDS and WARNINGS provided.
1. Place power unit on suitable work
surface.
Before using the food processor with
any of the attachments, the power unit
should be placed on a suitable work
surface. The surface should be sturdy ,
smooth and clean; make sure that
there is no flour or oil on the surface.
A clean, smooth surface will provide
the best footing for the suction cup feet
on the power unit and will limit slipping
and/or “walking,” see figure 2h.
2. Plug power unit into power supply.
Pull the power unit’s cord out to
appropriate length and plug it into a
convenient nearby outlet.
3. Select attachment to be used.
Select the attachment you wish to use.
4. Cover the drive not being used.
If dual drive is to be used for selected
attachment, make sure that safety
motor drive cover is placed over the
high speed blender drive and pressed
down until it snaps in place.
If high speed blender drive is to be
used, remove the safety motor drive
cover from the high speed blender
drive and place mixing bowl over dual
drive and turn clockwise to lock into
position as shown in figure 4a. Next
place the mixing bowl cover, with
pusher/measuring cup in the feeding
tube, on the bowl. Make sure arrows
on cover and bowl are aligned, so that
tabs on bowl fit into channels in cover
and then turn cover clockwise until tab
on cover enters cover interlock and
turn until tab clicks into place, figure
4b.
Figure 4.
5. Place selected attachment.
Place the selected attachment on
power unit. See specific instructions
for attachment selected. Specific
instructions are located on pages
listed below:
Attachment Pages
Bowl w/multifunction blade ..... 10–12
with dough hook .......................... 12
with whipping whisk/beater ..... 13-14
with slicing and grating disc .... 14-16
Blender .....................................16–18
Citrus juicer .............................. 19-20
Juice extractor........................... 20–21
Table 1.
8
6. Operate unit with rotary switch.
Once the attachment is in place, the
speed of its moving components can
be controlled through the use of the
rotary switch at the front of the power
unit. See figure 2. The rotary switch
has six or four positions, depending
on the model you have:
All MCM models have the following:
a. “M,” a momentary “pulse” position
that provides full speed and power
for the time it is held in position.
b. “O/Off,” the off position.
The MCM 5000 and 5100 have 2 speeds
c. Two speeds labeled 1 and 2.
Speed 1 is the lowest speed.
The MCM 5200 has 4 speeds:
d. Four speeds labeled 1, 2, 3 and 4.
Speed 1 is the lowest speed. The
speed increases with each
succeeding step up to the highest
speed, speed 4.
9. Continue use.
If the attachment was of the batch-feed
type and you wish to continue using
the attachment, empty the bowl or jar
of the attachment per its specific
instructions and reinstall the
attachment as before. Repeat steps
5 through 8 as often as necessary to
complete work.
10. Work completed,
remove attachment.
If the attachment is of the continuous
feed type or is the batch type and you
have completed the work you wished
to perform with the attachment,
remove the attachment from the power
unit per the instructions for the specific
attachment being used.
1 1 . Place contents (batch-feed type).
If the attachment is the batch feed
type, disassemble per the specific
attachment’s instructions and place
the contents in a suitable container .
All models of the Bosch Food
Processor incorporate a built-in safety
cutout switch to protect the motor
against overheating. If the safety
becomes activated, the power unit will
stop. If power unit should stop even
though there is power to the unit see
TROUBLESHOOTING at the back of
this manual .
7. T urn power unit off.
When your work with the attachment
is completed or the capacity of the
batch-feed attachment has been
reached, turn the power unit to the Off
position, “O/Off,” and unplug.
8. Remove the attachment.
Remove the attachment from the
power unit, per instructions for the
specific attachment being used.
12. Care and cleaning.
Once you have completed working
with the Bosch Food Processor, the
next step is to disassemble and clean
the attachments. If you wish to use
another attachment, please return to
step 3, above.
Power unit
With the power unit turned Off and
unplugged, it should be cleaned only with
a clean, damp cloth. Then wipe off the safety
motor drive cover and reinstall on the power
unit, if necessary. Never use coarse or
caustic cleaning products to clean the
power unit. Never immerse the power unit
in water.
The power unit may be left on the counter
or stored for future use. If the unit will be
stored, store the cord and lift the power unit
and place in your chosen storage area.
9
Loading...