Bosch RSS-241575W-FR, RSS-241575W-FW Specsheet

Fire Alarm Systems | RSS 24 V Fixed‑candela Strobes

RSS 24 V Fixed‑candela Strobes

www.boschsecurity.com

u UL Regulated voltage ranges of 16 V to 33 V using

filtered DC or unfiltered FWR voltage

u Strobes produce 1 flash per second over the

regulated voltage range; listed at 15 cd, but providing 75 cd on axis

These Wheelock fixed‑candela strobes provide intensities of 15/75 cd. They can be synchronized when used with the DSM Synchronization Module or a compatible control panel. Synchronized strobes can eliminate possible restrictions on the number of strobes in the field of view. When synchronized, these strobes comply with ADA requirements concerning photosensitive epilepsy and meet the requirements of NFPA 72.

Certifications and approvals

Cooper Wheelock, Inc. holds these Listings and Approvals:

Region

Certification

USA UL UUKC: Signaling Appliances and Equip-

ment for the Hearing Impaired (UL1971)

CSFM see our website

Installation/configuration notes

Compatible Products

The following products are compatible with the RSS Strobes:

u ADA/NFPA/ANSI compliant

u Zero inrush above peak

Category Product ID Product Description

Control

D7024

Addressable FACP

Panels

D7024 Conventional FACP

D8024

D9124

D10024A

FPD-7024

Analog FACP

Addressable FACP

Analog FACP

Addressable FACP

FPD-7024 Conventional FACP

FPA-1000 Analog Addressable FACP

Modules DSM‑12/24‑R Dual synchronization module (red)

When used with a D7039 Multiplex Expansion Module, the FPD-7024 and D7024 become addressable fire alarm control panel (FACP).

For synchronization, use the DSM-12/24-R Synchronization Module with these control panels.

Mounting Considerations

These strobe appliances use an integral strobe mounting plate for mounting on the indicated back boxes for the indicated applications:

2 | RSS 24 V Fixed‑candela Strobes

Conduit

Applications

Single‑gang •

Double‑gang • •

Four‑inch square •

100‑mm European •

BB‑R • •

SHBB‑R •

Surface Mounted

Flush Mounted

All models have an attractive cover plate for a clean, finished appearance.

Wiring

Notice

Do not use these units in coded or pulsed signaling circuits.

The input terminals accept wires with diameters between 18 AWG and 12 AWG (ISO 0.75 mm2 and 4 mm2).

Parts included

Quant. Component

1 Strobe

1 Hardware pack

1 Literature pack

Technical specifications

Electrical

Current Draw

• at 16 VDC to 33 VDC:

• at 16 FWR to 33 FWR:

Voltage (24 V nominal)

15/75 cd*: 90 mA RMS maximum

15/75 cd*: 145 mA RMS maximum

16 VDC or FWR to 33 VDC or FWR

*Although Listed under UL1971 at 15 cd, the strobe produces 75 cd on axis.

Environmental

Relative Humidity: Up to 95%, non‑condensing

Temperature (Operating):

0°C to +49°C (+32°F to +120°F)

Mechanical

Dimensions (H x W x D):

Material: Molded plastic enclosure incorporating a

4.75 in. x 4.75 in. x 2.5 in. 12.1 cm x 12.1 cm x 6.4 cm)

Xenon flashtube and Lexan lens.

Trademarks

All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

Ordering information

RSS‑241575W‑FR 24 VDC Wall‑mount Strobe (square, red)

This Wheelock red, 24 VDC, wall‑mount, fixed‑candela strobe is listed at 15 cd, but provides 75 cd on axis. It can be synchronized when used with the SM (single) and DSM (dual) Synchronization Modules or a compatible control panel.

Order number RSS-241575W-FR

RSS‑241575W‑FW 24 VDC Wall‑mount Strobes (square, white)

This Wheelock white, 24 VDC, wall‑mount, fixed‑candela strobe is listed at 15 cd, but provides 75 cd on axis. It can be synchronized when used with the SM (single) and DSM (dual) Synchronization Modules or a compatible control panel.

Order number RSS-241575W-FW

Accessories

BB‑R Steel Back Box

Black, 10.2 cm (4 in.) square, 3.8 cm (1.5 in.) deep

Order number BB-R

DBB‑R Steel Back Box (red)

8.6 cm (3.375 in.) square, 5.6 cm (2.1875 in.) deep

Order number DBB-R

DSM‑12/24‑R Dual Synchronization Module (red)

A 12/24 VDC Cooper Wheelock module that synchronizes notification appliances on a single Class A or two Class B circuits.

Order number DSM‑12/24‑R

NATP‑R Trim Plate (red)

13.3 cm (5.25 in.) square, 2.1 cm (0.8125 in.) thick. Not Available.

Order number NATP-R

NATP-W Trim Plate (white)

13.3 cm (5.25 in.) square, 2.1 cm (0.8125 in.) thick

Order number NATP-W

RP‑R Retrofit Plate (red)

20.3 cm (8 in.) high, 14.9 cm (5.875 in.) wide. Not Available.

Order number RP-R

SBB‑R Surface‑mount Back Box (red)

14 cm (5.5 in.) x 14.2 cm (5.6 in.) x 9.1 cm (3.6 in.)

Order number SBB-R

SBB‑W Surface‑mount Back Box (white)

14 cm (5.5 in.) x 14.2 cm (5.6 in.) x 9.1 cm (3.6 in.)

Order number SBB-W

+ 1 hidden pages