Bosch PXX695HC1E User Manual

Register your

new device on

MyBosch now and

get free benefits:

bosch-home.com/

welcome

Induction hob

PXX...HC..

[en]

Information for Use

en Safety

Further information and explanations are available online:

Table of contents

1 Safety...................................................................2

2 Avoiding material damage..................................4

3 Environmental protection and saving en-

ergy ......................................................................5

4 Suitable cookware...............................................5

5 Familiarising yourself with your appliance .......7

6 Before using for the first time ............................8

7 Software update ..................................................8

8 Basic operation ...................................................8

9 Favourite button................................................10

10 FlexInduction.....................................................10

11 Time-setting options.........................................11

12 PowerBoost.......................................................12

13 PanBoost1..........................................................12

14 Keep-warm function1........................................13

15 Transfer settings...............................................13

16 PerfectFry Sensor .............................................13

17 Childproof lock..................................................15

18 Pause .................................................................15

19 Individual safety switch-off ..............................15

20 Basic settings....................................................16

21 Cookware test ...................................................17

22 HomeConnect ..................................................17

23 Hob-based hood control...................................19

24 Cleaning and servicing.....................................20

25 Troubleshooting................................................21

26 Disposal.............................................................22

27 Customer Service..............................................22

28 Information regarding Free and Open

Source Software................................................22

29 Declaration of Conformity ................................23

30 Test dishes ........................................................23

1 Safety

Observe the following safety instructions.

1.1 General information

¡ Read this instruction manual carefully.
¡ Keep the instructions, the appliance and

the product information safe for future refer­ence or for the next owner.

¡ Do not connect the appliance if it has been

damaged in transit.

1.2 Intended use

Only a licensed professional may connect ap­pliances without plugs. Damage caused by in­correct connection is not covered under the
warranty.
The appliance can only be used safely if it is
correctly installed according to the safety in­structions. The installer is responsible for en­suring that the appliance works perfectly at its
installation location.
Only use this appliance:

¡ To prepare meals and drinks.
¡ Under supervision. Never leave the appli-

ance unattended when cooking for short
periods.

¡ in private households and in enclosed

spaces in a domestic environment.

¡ up to an altitude of max. 4000m above

sea level.

Do not use the appliance:
¡ With an external timer or a separate remote

control. This does not apply if operation
with appliances included in EN 50615 is
switched off.

If you wear an active implantable medical
device (e.g. a pacemaker or defibrillator),
check with your doctor that it complies with
Council Directive 90/385/EEC of 20th June
1990, EN 45502-2-1 and EN 45502-2-2, and
that it has been chosen, implanted and pro­grammed in accordance with VDE-AR-E
2750-10. If these conditions are satisfied, and

1

Available depending on software version. Further information on availability can be found on the website.

2

Safety en

if, in addition, non-metal cooking utensils and
cookware with non-metal handles are used, it
is safe to use this induction hob as intended.

1.3 Restriction on user group

This appliance may be used by children aged
8 or over and by people who have reduced
physical, sensory or mental abilities or inad­equate experience and/or knowledge,
provided that they are supervised or have
been instructed on how to use the appliance
safely and have understood the resulting
dangers.
Do not let children play with the appliance.
Children must not perform cleaning or user
maintenance unless they are at least 15 years
old and are being supervised.
Keep children under the age of 8 years away
from the appliance and power cable.

1.4 Safe use

WARNING‒Risk of fire!

Leaving fat or oil cooking on an unattended
hob can be dangerous and may lead to fires.

▶ Never leave hot oil or fat unattended.
▶ Never attempt to extinguish a fire using wa-

ter; instead, switch off the appliance and
then cover with a lid or a fire blanket.

The cooking surface becomes very hot.
▶ Never place flammable objects on the

cooking surface or in its immediate vicinity.

▶ Never place objects on the cooking sur-

face.

The appliance will become hot.
▶ Do not keep combustible objects or aero-

sol cans in drawers directly underneath the

hob.
Hob covers can cause accidents, for example
due to overheating, catching fire or materials
shattering.
▶ Do not use hob covers.
After every use, switch off the hob using the
main switch.
▶ Do not wait until the hob turns off automat-

ically as there are no longer any pots and

pans on it.
Food may catch fire.
▶ The cooking process must be monitored. A

short process must be monitored continu-

ously.

WARNING‒Risk of burns!

The appliance and its parts that can be
touched become hot during use, particularly
the hob surround, if fitted.
▶ Caution should be exercised here in order

to avoid touching heating elements.

▶ Young children under 8 years of age must

be kept away from the appliance.

Hob protective grilles may cause accidents.
▶ Never use hob protective grilles.
The appliance becomes hot during operation.
▶ Allow the appliance to cool down before

cleaning.
Metal objects on the hob quickly become very
hot.
▶ Never place metal objects (such as knives,

forks, spoons and lids) on the hob.

WARNING‒Risk of electric shock!

Improper repairs are dangerous.
▶ Repairs to the appliance should only be

carried out by trained specialist staff.
▶ Only use genuine spare parts when repair-

ing the appliance.
▶ If the power cord or the appliance power

cable of this appliance is damaged, it must

be replaced with a special power cord or

special appliance power cable, which is

available from the manufacturer or its Cus-

tomer Service.
If the appliance or the power cord is dam­aged, this is dangerous.

▶ Never operate a damaged appliance.
▶ If the surface is cracked, you must switch

off the appliance in order to prevent a pos-

sible electrical shock. To do this, switch off

the appliance via the fuse in the fuse box

rather than at the main switch.
▶ Never pull on the power cord to unplug the

appliance. Always unplug the appliance at

the mains.
▶ If the appliance or the power cable is dam-

aged, immediately switch off the fuse in the

fuse box.
▶ Call customer services. →Page22
An ingress of moisture can cause an electric
shock.
▶ Do not use steam- or high-pressure clean-

ers to clean the appliance.

3

en Avoiding material damage

The insulation on cables of electrical appli­ances may melt if it touches hot parts of the
appliance.
▶ Never bring electrical appliance cables into

contact with hot parts of the appliance.
If metallic objects come into contact with the
fan that is located on the underside of the
hob, this may cause an electric shock.
▶ Do not store long, pointed metallic objects

in the drawers below the hob.

WARNING‒Risk of injury!

Saucepans may suddenly jump due to liquid
between the saucepan base and the hotplate.
▶ Always keep hotplates and saucepan

bases dry.
▶ Never use icy-cold cookware that has been

in the freezer.

When cooking in a bain marie, the hob and
cooking container could shatter due to over­heating.
▶ The cooking container in the bain marie

must not directly touch the bottom of the
water-filled pot.

▶ Only use heat-resistant cookware.
An appliance with a cracked or broken sur­face can cause cuts.
▶ Do not use the appliance if it has a cracked

or broken surface.

WARNING‒Risk of suffocation!

Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.
▶ Keep packaging material away from chil-

dren.

▶ Do not let children play with packaging ma-

terial.
Children may breathe in or swallow small
parts, causing them to suffocate.

▶ Keep small parts away from children.
▶ Do not let children play with small parts.

Avoiding material damage

2  Avoiding material damage

This is where you can find the most common causes of damage and tips on how to avoid them.

Damage Cause Measure

Stains Unsupervised cooking process. Monitor the cooking process.
Stains, blisters Spilled food, especially food with a high

sugar content.

Stains, blisters or
fractures in the glass

Stains, discolouration Unsuitable cleaning methods. Only use cleaning agents that are suitable for

Blisters or fractures in
the glass

Scratches, discolour­ation

Scratches Salt, sugar or sand. Do not use the hob as a work surface or

Damage to the appli­ance

Damage to the cook­ware or the appliance

Glass damage Melted material on the hot cooking zone or

Overheating Hot cookware on the control panel or on the

Defective cookware, cookware with melted
enamel or cookware with copper or alu­minium base.

Knocks or falling cookware, cooking ac­cessories or other hard or pointed objects.

Rough cookware bases or moving the cook­ware on the hob.

Cooking with frozen cookware. Never use frozen cookware.

Cooking without contents. Never place or heat empty cookware on a

hot pot lid on the glass.

frame.

Remove immediately with a glass scraper.

Use suitable cookware that is in a good con­dition.

glass ceramic, and only clean the hob when
it is cold.

When cooking, do not hit the glass or let ob­jects fall onto the hob.

Check the cookware. Lift the cookware when
moving it.

storage space.

hot cooking zone.
Do not place greaseproof paper or alu-

minium foil nor plastic containers or pot lids
on the hob.

Never place hot cookware on these areas.

4

Environmental protection and saving energy en

ATTENTION!

A fan is located on the underside of this hob.

▶ If a drawer is located on the underside of the hob,

do not store any small or pointed objects, paper or
tea towels in it. These objects may be sucked in
and damage the fan or impair the cooling.

▶ There must be a clearance of at least 2cm between

the contents of the drawer and the fan entry point.

Environmental protection and saving energy

3  Environmental protection and saving energy

3.1 Disposing of packaging

The packaging materials are environmentally compat­ible and can be recycled.

▶

Sort the individual components by type and dispose
of them separately.

3.2 Saving energy

If you follow these instructions, your appliance will use
less energy.

Select the cooking zone to match the size of your
pan. Centre the cookware on the hob.
Use cookware whose base diameter is the same dia­meter as the hotplate.

Tip:Cookware manufacturers often give the upper
diameter of the saucepan. It is often larger than the
base diameter.

Unsuitable cookware or incompletely covered cook-

¡

ing zones consume a lot of energy.

Cover saucepans with suitable lids.

Cooking without a lid consumes considerably more

¡

energy.

Suitable cookware

4  Suitable cookware

Lift lids as infrequently as possible.

When you lift the lid, a lot of energy escapes.

¡

Use a glass lid.

You can see into the pan through a glass lid

¡

without having to lift it.

Use pots and pans with flat bases.

Uneven bases increase energy consumption.

¡

Use cookware that is suitable for the quantity of food.

Large items of cookware containing little food need

¡

more energy to heat up.

Cook with only a little water.

The more water that is contained in the cookware,

¡

the more energy is required to heat it up.

Turn down to a lower power level early on.

If you use an ongoing power level that is too high,

¡

you will waste energy.

Product Information according (EU) 66/2014 can be
found on the attached appliance pass and online on
the product page for your appliance.

Cookware that is suitable for induction cooking must
have a ferromagnetic base, i.e. it must be attracted by
a magnet. The base must also match the size of the
cooking zone. If cookware is not detected on a cooking
zone, place this on the cooking zone with the next
smallest diameter.

Cookware Materials Properties

Recommended cook­ware

Suitable The base is not fully ferromagnetic. If the ferromagnetic area is smaller than the

Stainless steel cookware in a sandwich
design that distributes the heat well.

Ferromagnetic cookware made of enamelled
steel, cast iron or special induction cookware
made of stainless steel.

4.1 Size and characteristics of the cookware

To be able correctly detect the cookware, you must
take the size and the material of the cookware into con­sideration. All cookware bases must be perfectly flat
and smooth.
Use Cookware test to check whether the cookware is
suitable. Refer to
→"Cookware test", Page17 for more details.

This cookware distributes the heat evenly,
heats up quickly, and ensures that it can be
detected easily.

This cookware distributes the heat evenly,
heats up quickly, and ensures that it can be
detected.

base of the cookware, only the area that is
ferromagnetic heats up. As a result, the heat
is not distributed evenly.

5

en Suitable cookware

Cookware bases that contain aluminium. These cookware bases reduce the ferromag-

Not suitable Cookware made from normal thin steel,

glass, clay, copper or aluminium.

Notes

¡ Do not use adapter plates between the hob and the

cookware.

¡ Do not heat up empty cookware and do not use

cookware with a thin base, as this may become very
hot.

netic area, which means that less power is
emitted to the cookware. This cookware may
not be sufficiently detected or may not be de­tected at all, and therefore does not heat suf­ficiently.

6

Familiarising yourself with your appliance en

A

C

B

C

Familiarising yourself with your appliance

5  Familiarising yourself with your appliance

5.1 Control panel

Individual details, such as colour and shape, may differ from the figure.

Letters Designation

Main switch
Control panel
Cooking zone

Note:Always keep the control panel clean and dry.
Tip:Do not place any cookware near the displays or

buttons. The electronics may overheat.

Touch fields

When you switch on the hob, the symbols for the con­trols available at this time light up.

Sensor Function

Main switch

⁠ Select a cooking zone

Settings area
PowerBoost
Automatic linking/separating of cooking

zones
PerfectFry Sensor
Timer functions
Childproof lock
Pause
Favourite button

⁠ Connectivity

Indicators/symbols

Display Function

Switch-off timer
PerfectFry Sensor

⁠- Power levels

Childproof lock

Buttons in connection with Home Connect

As soon as the connection to Home Connect has been
established, the following buttons and displays are
available:

Sensor Function

⁠ Accept settings from another appliance

If lights up, search for further information in the
HomeConnect app.

7

en Before using for the first time

A A

5.2 Distribution of the cooking zones

The specified power has been measured with the
standard pots which are described in IEC/EN
60335-2-6. The power may vary depending on the size
of the cookware or cookware material.

Area Highest power level

⁠ ⁠ Power level 9

PowerBoost

2200W
3700W

Area Highest power level

⁠ Power level 9

PowerBoost

3300W
3700W

5.3 Cooking zone

Before you start cooking, check whether the size of the
cookware fits the cooking zone that you want to use for
cooking:

Area Cooking zone type

⁠ Single-circuit cooking zone
⁠ Flex Zone

→"FlexInduction", Page10

5.4 Residual heat indicator

The hob has a residual heat indicator for each cooking
zone. Do not touch the cooking zone if the residual
heat indicator is lit.

Display Meaning

⁠ The cooking zone is hot.
⁠ The cooking zone is warm.

Before using for the first time

6  Before using for the first time

Observe the following recommendations.

6.1 Initial cleaning

Remove any leftover packaging from the hob surface
and wipe the surface with a damp cloth. You can find a
list of recommended detergents on the official website
www.bosch-home.com.
More information on care and cleaning. →Page20

6.2 Cooking with induction

In comparison to conventional hobs, induction techno­logy brings with it a series of changes and has a num­ber of benefits such as time savings when cooking and
frying, energy savings as well as greater ease of clean­ing and care. It also offers improved heat control as the
heat is generated directly in the cookware.

Software update

7  Software update

If the appliance is connected to HomeConnect, some
functions may be available with a software update.

6.3 Cookware

You can find a list of recommended cookware on the
official website www.bosch-home.com.
Further information on suitable cookware. →Page5

6.4 Setting Home Connect

When you first switch on the appliance, you will be
prompted to set your home network. ⁠lights up for a
few seconds on the display panel.
To begin the connection to Home Connect, touch
and proceed in accordance with the information in the
section
→"HomeConnect ", Page17.
To end the setting, switch off the hob.
You can also adjust the HomeConnect setting at a dif­ferent time.

More information on the availability of additional func­tions can be found on the website www.bosch­home.com

Basic operation

8  Basic operation

8.1 Switching on the hob

▶

Touch ⁠.

8

A signal sounds. The symbols for the cooking zones

and the currently available functions light up.

lights up in the cooking zone displays.

a The hob is ready to use.

ReStart

▶

If you switch the appliance on within four seconds of
switching it off, the hob operates with the settings
that were previously set.

8.2 Switching the hob off

▶

Touch until the displays go out.

a All cooking zones are switched off.

Note:If all of the cooking zones are switched off for
longer than 59seconds, the hob is automatically
switched off.

8.3 Setting the power level in the cooking zones

The cooking zone has 17 power levels, which are dis­played from to with intermediate values. Select the
best power level for the food and the planned cooking
process.

1.

Touch the required cooking zone display

a and light up.

Basic operation en

2.

Select the required power level in the settings area.

a The power level has been set.

Note:If no cookware is placed on the cooking zone or
the pot is not suitable, the selected power level flashes.
After a certain period of time, the cooking zone
switches itself off.

QuickStart

▶

If you set one or more items of cookware on any
cooking zone before switching on the appliance, the
hob detects this and automatically selects the cook­ing zone for one of the items of cookware. Then se­lect the power level in the next 59 seconds, or the
hob will switch off.

Changing the power level and switching off the cooking zone

1.

Select the cooking zone.

2.

Select the required power level or set it to

a The cooking zone's power level is changed or the

cooking zone is switched off.

8.4 Cooking tips

¡ When heating up puree, cream soups or thick

sauces, stir occasionally.

¡ To preheat, set the power level 8-9.
¡ When cooking with the lid on, reduce the power

level as soon as you see steam escaping. The
cooking result is not affected by the steam escap­ing.

¡ After cooking, place a lid on the cookware until you

serve the dish.

¡ To cook with the pressure cooker, observe the man-

ufacturer's instructions.

¡ Do not cook food for too long, otherwise nutrients

will be lost. The kitchen timer enables you to set the
optimal cooking time.

¡ Ensure that the oil does not smoke.
¡ To brown the food, fry it in small portions, one after

the other.

¡ Some items of cookware may reach high temperat-

ures while the food is cooking. You should therefore
use oven gloves.

¡ You can find recommendations for energy-efficient

cooking under
→"Saving energy", Page5

Cooking recommendations

The table shows which power level ( ) is suitable for
which food. The cooking time ( ) may vary de­pending on the type, weight, thickness and quality of
the food.

Melting

Chocolate, cooking chocolate 1-1.5 ­Butter, honey, gelatine 1-2 -

Heating and keeping warm

Stew, e.g. lentil stew 1.5-2 -

1

Without lid

2

Preheat to power level 8 - 8.5

1

Milk
Boiled sausages

1

1.5-2.5 ­3-4 -

Defrosting and heating

Spinach, frozen 3-4 15-25
Goulash, frozen 3-4 35-55

Poaching, simmering

Potato dumplings

1

Fish
White sauces, e.g. Béchamel

1

4.5-5.5 20-30
4-5 10-15
1-2 3-6

sauce
Whisked sauces, e.g.

3-4 8-12
Béarnaise sauce, Hollandaise
sauce

Boiling, steaming, braising

Rice, with double the volume of

2.5-3.5 15-30

water
Rice pudding

2

2-3 30-40
Potatoes boiled in their skin 4.5-5.5 25-35
Boiled potatoes 4.5-5.5 15-30

1

Pasta

6-7 6-10
Stew 3.5-4.5 120-

180
Soups 3.5-4.5 15-60
Vegetables 2.5-3.5 10-20
Vegetables, frozen 3.5-4.5 7-20
Stew in a pressure cooker 4.5-5.5 -

Braising

Rolled roasting joint 4-5 50-65
Pot roast 4-5 60-100

1

Without lid

2

Preheat to power level 8 - 8.5

9

en Favourite button

Goulash

Braising/frying with a small
amount of fat

2

1

3-4 50-60

Escalope, plain or breaded 6-7 6-10
Escalope, frozen 6-7 6-12
Chops, plain or breaded 6-7 8-12
Steak (3 cm thick) 7-8 8-12
Poultry breast, 2 cm thick 5-6 10-20
Poultry breast, frozen 5-6 10-30
Rissoles (3 cm thick) 4.5-5.5 20-30
Hamburgers (2 cm thick) 6-7 10-20
Fish and fish fillet, plain 5-6 8-20
Fish and fish fillet, breaded 6-7 8-20
Fish, breaded and frozen, e.g.

6-7 8-15

fish fingers
Prawns and scampi 7-8 4-10
Sautéing fresh vegetables and

7-8 10-20

mushrooms

1

Without lid

2

Preheat to power level 8 - 8.5

Stir-fry, vegetables, meat cut in

7-8 15-20

strips Asian-style
Frozen dishes, e.g. stir-fries 6-7 6-10
Pancakes, cooked one after the

6.5-7.5 -

other
Omelette (cooked one after the

3.5-4.5 3-10

other)
Fried eggs in oil 5-6 3-6

Deep-frying, 150–200g per
portion in 1–2l oil, deep-fat
fried in portions

Frozen products, e.g. chips,

1

8-9 -

chicken nuggets
Croquettes, frozen 7-8 ­Meat, e.g. chicken portions 6-7 ­Fish, breaded or battered 6-7 ­Vegetables, mushrooms,

6-7 ­breaded, beer-battered or tem­pura

Small baked items, e.g. dough-

4-5 ­nuts, battered fruit

1

Without lid

2

Preheat to power level 8 - 8.5

Favourite button

9  Favourite button

You can use the function to select two functions or
cooking settings which can then be quickly accessed
on ⁠.

9.1 Assigning Favourite button functions

Requirement:Connect the appliance to Home Con-

nect. You can find more information about this under
Home Connect →Page17

FlexInduction

10  FlexInduction

The flexible cooking zone allows you to position cook­ware of any shape or size any way you like. It consists
of four inductors that work independently of each other.
When the flexible cooking zone is in use, only the area
that is covered by cookware is activated.

10.1 Positioning the cookware

The flexible cooking zone can be configured in two
ways, depending on which cookware is used. In order
to guarantee good thermal detection and heat distribu­tion, we recommend positioning the cookware in the
centre, as shown in the figures.

1.

To assign functions, open the Home Connect app
and follow the instructions.

2.

As soon as you have assigned the functions, you
can use them:

a Function 1: Press briefly.
a Function 2: Press and hold ⁠.

Note:If you have not assigned any functions,
switches off once the hob is switched on.

¡ Position the cookware depending on the size:

As a connected cooking zone

Recommended for cooking with just one item of cook­ware.

10

Time-setting options en

¡ Recommended oblong cookware ⁠:

As two separate cooking zones

Recommended for cooking with two items of cook­ware.
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.

Caution

Do not place cookware in the middle between the right
and left zones. The cooking zones are not activated
correctly and you do not achieve a good cooking res­ult.

10.2 Switching on FlexInduction

1.

Place the cookware on the cooking zone.

2.

The appliance detects the cookware and selects the
cooking zone.

a The cooking zones split or connect automatically

depending on the size and position of the cook­ware.

a When the flexible zone is connected, lights up

more brightly.

Notes

¡ By pressing , you can manually change the set-

tings for the cooking zones.

¡ If you move or lift the cookware from an active con-

nected cooking zone, an automatic search starts.
Each item of cookware that is found within the cook­ing zone during this search is heated at the previ­ously selected power level.

Time-setting options

11  Time-setting options

Your hob has various functions for setting the cooking
time:

¡ Switch-off timer
¡ Timer

The button is assigned to the Switch-off timer func­tion by default. However, you can also assign one of
the above-mentioned functions to the sensor.You can
change these settings via the Home Connect app or in
the basic settings →Page16.

11.1 Switch-off timer

Allows you to programme a cooking time for one or
more cooking zones and their automatic switch-off
once the time set has elapsed.

Switching on Switch-off timer

1.

Select the cooking zone and the power level.

2.

Press ⁠.

a and light up.

3.

Within the next 10seconds, set the required cook­ing time in the settings area.

‒ You can set intermediate values between 1

minute and 9 minutes in increments of 30
seconds. To do this, use to select the intermedi­ate values.

‒ To select a time in hours, e.g. 1h 30mins, press

the numerical sequence 1 - 3 - 0 in the settings
area. If you select a time of more than
60minutes, the time is automatically displayed in
hours.

4.

Touch to confirm.

a Once the cooking time has elapsed, the cooking

zone is switched off and a signal sounds.

Notes

¡ If a cooking time has been programmed in a cook-

ing zone in which the PerfectFry Sensor is activated,
the programmed cooking time will start to count
down as soon as the selected temperature level has
been reached.

¡ To switch the display between the operating temper-

ature PerfectFry Sensor and the programmed cook­ing time, press the selected temperature.

Changing or switching off Switch-off timer

1.

Select the cooking zone and then touch ⁠.

2.

To switch off the function, change the cooking time
or set it to ⁠.

11

en PowerBoost

11.2 Timer

Enables a clock to be activated. This function operates
independently of the cooking zones and other settings.
It does not automatically switch off the cooking zones.

Switching on Timer

Requirement:Assign the function to ⁠.

1.

Press ⁠.

PowerBoost

12  PowerBoost

2.

Select the required time.

a The time starts to elapse.
a A signal tone sounds and the displays flash once

the time has elapsed.

Changing or switching off the Timer

1.

Press ⁠.

2.

To switch off the function, change the cooking time
or set it to ⁠.

The PowerBoost function enables you to heat up large
quantities of water faster than when using ⁠.
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, ⁠and ⁠ flash on the display for
the selected cooking zone. ⁠is then set automatically
without activating the function.

12.1 Switching on PowerBoost

PanBoost

13  PanBoost

You can use this function to heat up pans more quickly
than with . Do not use the PowerBoost function with
frying pans – this may damage the coating.
You can activate the function via Home Connect or Fa­vourite button.
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, ⁠and flash on the display for
the selected cooking zone. then switches on auto­matically.

1

1.

Select the cooking zone.

2.

Touch

a The ⁠display lights up.
a The function is activated.

Note:You can also switch on this function when cook­ing with a connected FlexZone.

12.2 Switching off PowerBoost

1.

Select the cooking zone.

2.

Touch .

a The ⁠display goes out and the cooking zone

switches back to power level

a The function is switched off.

Note:In certain circumstances, the appliance switches
this function off to protect the electronic elements in­side the hob.

¡ Only use cold pans.
¡ Use pans with a completely flat base. Do not use

pans with a thin base.

13.2 Switching on PanBoost

Requirement:Assign the function to .

→"Favourite button", Page10.

1.

Select the cooking zone.

2.

Touch ⁠.

a lights up.
a The function is activated.

Note:You can also switch on this function when cook­ing with a connected FlexZone.

13.3 Switching off PanBoost

1.

Select the cooking zone.

2.

13.1 Recommended applications

¡ Do not place a lid on the pan.
¡ Never leave pans unattended when they are heating

up.

1

Available depending on software version. Further information on availability can be found on the website.

12

Select the power level.

a goes out
a The function is switched off.

Note:To avoid high temperatures, this function auto­matically switches itself off after 30 seconds.

Keep-warm function en

Keep-warm function

14  Keep-warm function

1

You can use this function to melt chocolate or butter,
and to keep meals warm.
You can activate the function via Home Connect or Fa­vourite button.

14.1 Switching on Keep-warm function

Requirement:Assign the function to .

→"Favourite button", Page10.

1.

Select the required cooking zone.

Transfer settings

15  Transfer settings

You can use this function to transfer the power level
and the programmed cooking time from one cooking
zone to another.

15.1 Transfer settings

Requirement:Move the cookware to a cooking zone

which is not switched on, which you have not yet pre­set or on which no other cookware has been previously
placed.

2.

Touch ⁠.

lights up.

a The function is switched on.

14.2 Switching off Keep-warm function

1.

Select the cooking zone.

2.

Set to

goes out.

a The function is switched off.

1.

Move the cookware.

a The cookware is detected.
a The previously selected power level and flash al-

ternately on the display for the new cooking zone.

2.

Select the new cooking zone to implement the set­tings.

a The original cooking zone is set to
a The settings are transferred to the new cooking

zone.

Note:If you place a new item of cookware on a differ­ent cooking zone before you have confirmed the set­tings, you can use this function for the new item of
cookware.

PerfectFry Sensor

16  PerfectFry Sensor

This function allows you to melt, prepare sauces, sauté,
deep fry or fry while keeping the temperature under
control.
Instead of constantly adjusting the power level during
cooking, select the required target temperature once at
the start. The sensors under the glass ceramic meas­ure the temperature of the cookware and keep this
constant throughout the entire cooking process.
This function is available on all cooking zones marked
with this symbol ⁠.

Functions Temperature

Melting 70-80ºC
Preparing sauces 110 - 120 ºC
Frying 140ºC
Frying 160ºC
Frying 180-200ºC

1

Available depending on software version. Further information on availability can be found on the website.

Functions Temperature

Frying 220ºC

16.1 Recommended cookware

Special cookware has been developed for this function,
which delivers the best results.

The recommended cookware is available from cus­tomer service, specialist retailers or our online shop
www.bosch-home.com.

Note:You can also use other cookware. Depending on
the composition of the cookware, the achieved temper­ature may differ from the selected temperature level.

16.2 Switching on the PerfectFry Sensor

1.

Place the empty cookware on a cooking zone.

2.

Select the cooking zone.

13

en PerfectFry Sensor

3.

Press ⁠.

a , and the preset temperature light up on the dis-

play for the selected cooking zone.

4.

Select the temperature by swiping your finger over
the settings area.

a flashes until the set temperature is reached again.
a The selected temperature and the development of

the temperature reached in the pan flash alternately
until the selected temperature has been reached.

a The temperature shown on the displays is approxim-

ate and may differ from the actual temperature in
the frying pan.

a Once the temperature has been reached, a signal

tone sounds and as well as the temperature sym­bol stop flashing.

5.

Add the frying fat and then the food to the frying
pan.

Note:If you need to cook with more than 250ml oil,
add the oil and wait a few seconds before you add the
food.

16.3 Switching off PerfectFry Sensor

▶

Select the cooking zone and touch ⁠.

16.4 Recommendations for cooking with PerfectFry Sensor

The following table shows the ideal temperature levels
for a selection of dishes. The temperature and the
cooking time depend on the amount, condition
and quality of the food.

Meat

Escalope, plain 160-180 4-10
Escalope, breaded 180 6-10
Fillet 180-200 6-10
Chops 160-180 10-15
Cordon bleu, Wiener

Schnitzel
Steak, rare, 3cm thick 220 8-10
Steak, medium, 3cm

thick
Steak, well-done, 3cm

thick
T-bone steak, rare,

4.5cm thick
T-bone steak, medium,

4.5cm thick
Poultry breast, 2 cm

thick
Bacon 160-180 5-8
Minced meat 180-200 6-10
Hamburgers, 1.5cm

thick
Meatballs 160-180 10-20
Pre-boiled sausages 160-180 8-20
Chorizo, fresh saus-

ages

180 10-15

200 6-10

180 6-12

200-220 10-15

180-200 20-30

160 10-20

160-200 6-15

160-180 10-20

Skewers 160-180 10-20
Gyros 180-200 6-10

Fish and seafood

Fish fillet, plain 180 10-20
Fish fillet, breaded 180 10-20
Fish, fried, whole 160 10-20
Sardines 180 6-12
Prawns 180 4-8
Squid, cuttlefish 180-200 6-12
Blue mussels, clams,

cockles

Egg dishes

Fried eggs in butter 140 2-6
Fried eggs in oil 180-220 2-6
Scrambled eggs 140 4-9
Omelette 140 3-6
French toast 160 4-8
Crêpes, blini, pan-

cakes, tacos

Vegetables

Fried potatoes, boiled
in their skin

Chips 180-200 15-25
Potato fritters 200 2-4
Onions, garlic, sauteed

until clear
Onion rings 180-200 4-12
Courgettes, aubergines,

peppers
Green asparagus, fried 160-180 10-20
Mushrooms 180 10-15
Vegetables, glazed 120 10-20
Vegetables in tempura

batter

Frozen dishes

Chicken nuggets 180-200 8-12
Fish fingers 180 8-12
Chips 200-220 4-8
Stir-fries 160-180 6-10
Spring rolls 180-200 8-15
Pasties, croquettes 200-220 6-8

Sauces

Tomato sauce 120 20-30
Cream sauce 110-120 10-20
Béchamel sauce 110-120 10-20
Cheese sauce 110-120 3-8
Sweet sauces 110-120 10-20
Reducing sauces 110-120 5-10

Melting

Chocolate coating 70-80 5-15
Cheese 70-80 3-10

110-120 4-8

180-200 1-3

180-200 6-12

140 4-12

160-180 4-12

180-200 5-10

14

Childproof lock en

Butter 70-80 3-5
Fondue 70-80 5-15

Miscellaneous

Fried cheese 180-200 5-15
Croutons 160-180 6-10

Childproof lock

17  Childproof lock

The hob is equipped with a childproof lock. You can
use this to prevent children from switching on the hob.

17.1 Switching on Childproof lock

Requirement:The hob must be switched off.

▶

Touch and hold for 4 seconds.

a lights up for 10seconds.
a The hob is locked

Pause

18  Pause

Bread for toasting 200-220 8-12
Dried ready meals 110-120 5-10
Almonds, walnuts, pine

nuts, roasted
Popcorn 220 10-20

180-200 3-15

17.2 Deactivating the childproof lock

1.

To switch on the hob, touch ⁠.

2.

Touch and hold for 4 seconds.

a The lock is released.

17.3 Automatic childproof lock

You can also activate the childproof lock automatically
every time the hob is switched off.
You can find out how to switch the function on and off
in the "Basic settings" section →Page16.

You can use the function to pause and resume active
cooking processes for up to 10 minutes without chan­ging the settings you have selected.
You can switch the function on to clean the control
panel, for example.

18.1 Activating the Pause function

▶

Press ⁠.

a lights up in the cooking zone displays.

Individual safety switch-off

19  Individual safety switch-off

Activate the safety function if one cooking zone is in
operation for an extended period and you do not
change any settings. The cooking zone displays
and switches itself off.
The time depends on the selected power level.

Power level Time

1.0 - 1.5 10 hours

a All active cooking processes are stopped. The set-

tings are retained.

a The function is activated.

18.2 Deactivating the Pause function

▶

Touch ⁠.

a The function is switched off. The cooking processes

continue.

Note:After approximately 10 minutes, the cooking
zone automatically switches off.

2.0 - 3.5 5hours

4.0 - 5.0 4 hours

5.5 - 6.5 3 hours

7.0 - 7.5 2 hours

8.0 - 9.0 1hour

Press any button to switch on the cooking zone.

15

en Basic settings

Basic settings

20  Basic settings

You can configure the basic settings for your appliance to meet your needs.

20.1 Overview of the basic settings

Display Setting Value

⁠ Childproof lock

→"Childproof lock", Page15

- Manual.

- Automatic.

1

- Function switched off.

⁠ Audible signals - The confirmation signal, the fault signal and the sig-

nal for incorrect use are deactivated.

- The fault signal is activated.

- The confirmation signal and the signal for incorrect

use are activated.

- All signal tones are switched on 1.

⁠ Volume of the audible signals - Quiet.

- Medium.

1

– Loud.

⁠ Assign one of the time-setting programme

functions to on the control panel.

- Switch-off timer.

- Timer.

1

→"Time-setting options", Page11

⁠ Power limitation

This enables you to limit the total power of
the hob, if required, due to the circum­stances of your electrical installation. Ob­serve the regulations of the local electricity
suppliers. The available settings depend on
the maximum power of the hob. You can find
more information on the rating plate. If the
function is switched on and the hob has
reached the set power limit, the required and
permitted power level flashes and you can-

The power is increased by 500 W with each level.

– Switched off. Maximum power of the hob 1.

- 1000 W. Lowest power setting.
⁠. - 1500 W.

...

- 3000 W.
⁠. - 3500 W.

- 4000 W.
⁠. - 4500 W.

...

- Maximum power of the hob.

not select a higher power level.

⁠ Demo mode

Demonstration mode for the hob: When you

- Switched off.

- Switched on.

1

switch on the hob, lights up for a few
seconds and the cooking zones do not heat
up.

⁠ Cookware test

You can use this function to test the quality
of the cookware.

- Not suitable.

- Not optimal.

- Suitable.

→"Cookware test", Page17

- Hob-based hood control

→"Overview of the hood control settings", Page20

The settings are configured based on the ex­tractor hood model.

⁠ Restoring factory settings - Individual settings 1.

- Factory settings.

1

Factory setting

20.2 To go to the basic settings

Requirement:The hob must be switched off.

1.

To switch on the hob, touch ⁠.

2.

Within the next 10seconds, touch and hold for 4
seconds.

Product information Display

Customer service directory ⁠
Production number

16

Product information Display

Production number 1
Production number 2

a The first four displays provide the product informa-

tion. Touch to view the individual displays.

3.

Touch to access the basic settings.

a ⁠ and light up as a presetting.

4.

Touch repeatedly until the desired setting ap­pears.

5.

Select the required setting in the settings area.

6.

Touch and hold for 4 seconds.

a This saves the settings.

Cookware test

21  Cookware test

Cookware test en

20.3 Discarding changes to the basic settings

▶

Touch ⁠.

a All changes are discarded and not saved.

The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook­ware.
Before the test, ensure that the diameter of the cook­ware base corresponds to the diameter of the cooking
zone being used.
Access is via the basic settings. →Page16

21.1 Carrying out Cookware test

Requirement:As a single cooking zone, the flexible

cooking zone is set in such a way that only the indi­vidual item of cookware is checked.

1.

At room temperature, place the cookware with ap­prox.200ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.

2.

Call up the basic settings and select ⁠ ⁠ ⁠.

3.

Touch the settings area. flashes in the cooking
zones.

HomeConnect

22  HomeConnect

This appliance is network-capable. Connecting your ap­pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon­nect app to configure the settings.

Tips

¡ Please consult the documents supplied by

HomeConnect.

¡ Please also follow the instructions in the HomeCon-

nect app.

Notes

¡ Please note the safety precautions in this instruction

manual and make sure that they are also observed
when operating the appliance via the HomeCon­nect app.
→"Safety", Page2

¡ Hobs are not designed to be left unattended. Al-

ways monitor the cooking process.

¡ Operating the appliance on the appliance itself al-

ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.

a The function is switched on.
a After 10 seconds, the result appears in the cooking

zone displays.

21.2 Checking the result

You can see what the result means for the quality and
speed of the cooking process in the following table.

Result

The cookware is not suitable for the cooking zone
and therefore does not heat up.

The cookware is taking longer to heat up than ex­pected and cooking is not progressing as well as
it ought to.

The cookware is heating up correctly and cooking
is progressing well.

To reactivate this function, touch the settings area.

¡ In networked standby mode, the appliance requires

a maximum of2W.

22.1 Setting up HomeConnect

Requirements

¡ The appliance is connected to the power supply and

is switched on.

¡ You have a mobile device with a current version of

the iOS or Android operating system, e.g. a smart­phone.

¡ The mobile device and the appliance are within

range of your home network's Wi-Fi signal.

1.

Download the HomeConnect app.

2.

Open the HomeConnect app and scan the follow­ing QR code.

3.

Follow the instructions in the HomeConnect app.

17

en HomeConnect

22.2 Wi-Fi symbol

The Wi-Fi indicator on the main screen changes ac­cording to the status and quality of the connection and
the availability of the HomeConnect server.

status Description

Lights up steadily at half
brightness.

Flashes at full brightness. Network connection is be-

Lights up steadily at full
brightness.

Flashes. Network settings are re-

Switched off. Network not active.

No network connection
saved.

ing established.
Network connection

saved and Wi-Fi active.

set.

22.3 Adding or removing a Wi-Fi home network

The following overview shows how to add or remove a
Wi-Fi home network.

Wi-Fi home network
status

No Wi-Fi home network
stored.

The Wi-Fi home network
has now been saved.

The Wi-Fi home network
has now been saved.

Action

To add the Wi-Fi home
network, briefly press ⁠.

To pair another appliance,
press and hold ⁠.

To reset the Wi-Fi home
network settings, press
and hold . If flashes,
press and hold again.

22.4 Changing settings via the
HomeConnect app

You can use the HomeConnect app to change the set­tings for the cooking zones and send them to the hob.

Requirement:The hob is connected to the Wi-Fi and to
the HomeConnect app.

1.

Select the setting in the HomeConnect app and
send it to the hob.
Follow the instructions in the HomeConnect app.
Settings that you send from the HomeConnect app
to the hob must be confirmed on the hob.

a As soon as cooking settings are transmitted to a

cooking zone, the display starts to flash, depending
on the setting.

2.

Press to confirm the setting.

3.

To discard the setting, press any other touch field
on the hob.

22.5 Activating automatic presence detection

Thanks to the automatic presence detection function,
you no longer need to confirm parameters on the hob
from your mobile device, provided you are near the
hob. If you send settings to a cooking zone, you can
confirm these directly from your mobile device.

1

Requirements

¡ The hob is connected to the Wi-Fi and to the

HomeConnect app.

¡ The Bluetooth is connected to the mobile device.
¡ The user is near the hob.

1.

Open the HomeConnect app.

2.

In order to set the automatic presence detection, fol­low the instructions in the HomeConnect app.

22.6 Software update

Your appliance's software can be updated using the
software update function, e.g. for the purposes of op­timisation, troubleshooting or security updates.
To do this, you must be a registered HomeCon­nectuser, have installed the app on your mobile device
and be connected to the HomeConnectserver.
As soon as a software update is available, you will be
informed via the HomeConnectapp and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in­stalling it via the HomeConnectapp if you are in your
home network (Wi-Fi). The HomeConnectapp informs
you once installation is successful.

Notes

¡ The software update consists of two steps.

– The first step is the download.
– The second step is the installation on your appli-

ance.

¡ You can continue to use your appliance as normal

while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.

¡ Installation takes a few minutes. You cannot use

your appliance during installation.

¡ We recommend that you install security updates as

soon as possible.

22.7 Remote diagnostics

Customer Service can use Remote Diagnostics to ac­cess your appliance if you contact them, have your ap­pliance connected to the HomeConnect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.

Tip:For further information and details about the avail­ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com.

22.8 Data protection

Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
HomeConnect server (initial registration):
¡ Unique appliance identification (consisting of appli-

ance codes as well as the MAC address of the Wi-Fi
communication module installed).

¡ Security certificate of the Wi-Fi communication mod-

ule (to ensure a secure data connection).

¡ The current software and hardware version of your

appliance.

1

Available depending on software version. Further information on availability can be found on the website.

18

Hob-based hood control en

¡ Status of any previous reset to factory settings.

This initial registration prepares the HomeConnect
functions for use and is only required when you want to
use the HomeConnect functions for the first time.

Hob-based hood control

23  Hob-based hood control

If the hob and the extractor hood are HomeConnect­compatible, connect the appliances in the HomeCon­nectapp. To do this, connect the two appliances to
HomeConnect and follow the instructions in the app.

Notes

¡ Using the controls on the extractor hood always

takes priority. It is not possible to use the hob-based
hood control during this time.

¡ You can only connect to the extractor hood via the

HomeConnect app. Other connection routes are no
longer supported.

23.1 Controlling the extractor hood via the hob

In the basic settings for your hob, you can adjust the
behaviour of your extractor hood depending on
whether the hob or individual cooking zones are
switched on or off.
You can select other settings using the controls on the
hob.

Note:If you cannot find these settings for your hob,
check the settings of the extractor hood in the
HomeConnect app to configure the connection.

Connecting the fan

▶

In order to set the hood from the hob, you must first
assign the hood function to Favourite button.
→"Favourite button", Page10
If you assign the hood function , you can choose
between setting the fan, automatic mode or the
hood lighting.

Setting the fan

Requirement:The function is assigned to Favourite

button.

Note:Please note that the HomeConnect functions
can only be utilised with the HomeConnect app. In­formation on data protection can be retrieved in the
HomeConnect app.

1.

Press ⁠.

2.

Select the required setting in the settings area.
You can select the following settings:

Fan off
Fan setting 1
Fan setting 2
Fan setting 3
Intensive mode 1
Intensive mode 2
Automatic mode

Note:Available depending on extractor hood model.

a The fan is switched on.

3.

Press to switch off the fan.

Switching on automatic mode

You can set automatic mode using the hob's control
panel.

Requirement:The function is assigned to Favourite
button.

1.

To switch on automatic mode, press ⁠.

2.

To switch off automatic mode, press ⁠.

Setting the hood lighting

You can switch the hood light on and off using the
hob's control panel.

Requirement:The function is assigned to Favourite
button.

1.

To switch the lighting on, press ⁠.

2.

To switch the lighting off, press again.

19

en Cleaning and servicing

23.2 Overview of the hood control settings

In the basic settings for your hob, depending on the extractor hood model, you can adjust the behaviour of your ex­tractor hood depending on whether the hob or individual cooking zones are switched on or off. If you cannot find
these settings for your hob, check the settings of the extractor hood in the HomeConnect app to configure the con­nection. The display shows this setting only when the appliance has been connected to the extractor hood.

Indicator Setting Value

Setting for whether and how the fan switches on
automatically.

Setting for whether and how the fan is to run on
after switching off the hob.

The lighting switches itself on when the hob is
switched on.

The lighting switches itself off when the hob is
switched off.

1

Factory setting

2

Depending on the appliance specifications

Automatic fan start-up

– Switched off. The extractor hood must be

switched on manually, if required.

– Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.

1,

⁠

– Switched on in automatic mode. In auto­matic mode, the extractor hood switches itself on
when one of the cooking zones is switched on.

2

Fan run-on

– Fan switches off when the hob is switched off

– Switched on with standard fan run-on

– No change to the settings

1,

⁠

– Switched on in automatic mode

2

Switching the lighting on automatically

– Switched off

⁠ 1 – Switched on

Switching the lighting off automatically

⁠ 1 – Switched off

– Switched on

Cleaning and servicing

24  Cleaning and servicing

To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.

24.1 Cleaning products

You can obtain suitable cleaning products and glass
scrapers from customer service, a retailer or the online
shop www.bosch-home.com.

ATTENTION!

Unsuitable cleaning products may damage the sur­faces of the appliance.

▶ Never use unsuitable cleaning products.
▶ Do not use cleaning products while the hob is still

hot. This may cause marks on the surface.

Unsuitable cleaning products

¡ Undiluted detergent
¡ Detergent intended for dishwashers
¡ Abrasive cleaning products
¡ Aggressive cleaning products such as oven spray

or stain remover

¡ Abrasive sponges
¡ High-pressure or steam jet cleaners

24.2 Cleaning the hob

Clean the hob after every use to stop cooking residues
from getting burnt on.

Requirement:The hob must be cold. Do not allow the
hob to cool down if it has sugar stains, rice starch,
plastic or aluminium foil on it.

1.

Remove heavy soiling using a glass scraper.

2.

Clean the hob with a cleaning agent for glass
ceramic.
Follow the cleaning instructions on the packaging of
the cleaning agent.

Tips

¡ You can achieve good cleaning results using a

special sponge for glass ceramic.

¡ If you keep the base of the cookware clean, the

hob surface remains in a good condition.

24.3 Cleaning the hob surround

If the hob frame is dirty or stained after use, clean this.

Note:Do not use a glass scraper.

1.

Clean the hob frame with hot soapy water and a soft
cloth.
Wash new sponge cloths thoroughly before use.

2.

Dry with a soft cloth.

20

Troubleshooting

25  Troubleshooting

Troubleshooting en

You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.

WARNING‒Risk of injury!

Improper repairs are dangerous.

▶ Repairs to the appliance should only be carried out

by trained specialist staff.

▶ If the appliance is defective, call Customer Service.

→"Customer Service", Page22

WARNING‒Risk of electric shock!

Improper repairs are dangerous.

▶ Repairs to the appliance should only be carried out

by trained specialist staff.

▶ Only use genuine spare parts when repairing the

appliance.

▶ If the power cord or the appliance power cable of

25.1 Warnings

Notes

¡ If or appears in the displays, press and hold the

sensor for the respective cooking zone and read the
fault code.

¡ If the fault code is not listed in the table, disconnect

the hob from the power supply and wait 30seconds
before reconnecting it. If this display appears again,
contact customer service and specify the exact fault
code.

¡ If an error occurs, the appliance does not switch to

standby mode.

¡ In order to protect the appliance's electronic parts

from overheating or surge currents, the hob may
temporarily reduce the power level.

this appliance is damaged, it must be replaced with
a special power cord or special appliance power
cable, which is available from the manufacturer or
its Customer Service.

25.2 Information on the display panel

Fault Cause and troubleshooting

No displays light up. The power supply has been disconnected.

▶

Use other electrical appliances to check whether there has been a power failure.

The appliance has not been connected as shown in the circuit diagram.

▶

Connect the appliance in accordance with the circuit diagram.

Electronics fault

▶

If you are unable to rectify the fault, inform the technical after-sales service.

The displays flash. The control panel is wet or an object is covering it.

▶

Dry the control panel or remove the object.

⁠ ⁠, ⁠ ⁠, ⁠ ⁠ ⁠ ⁠ ⁠, ⁠

⁠ ⁠ ⁠ ⁠, ⁠

+ power level and

audible signal

and signal tone There is hot cookware in the vicinity of the control panel. The cooking zone has been

/ The cooking zone has overheated and has been switched off to protect the work surface.

/ The operating voltage is incorrect and outside of the normal operating range.

The electronics have overheated and one or all of the cooking zones have been switched
off.

▶

Wait until the electronics have cooled down sufficiently. Then touch any button on the
control panel.

There is hot cookware in the vicinity of the control panel. This may cause the electronics to
overheat.

▶

Remove the cookware. The fault display goes out shortly afterwards. You can continue to
cook.

switched off to protect the electronics.

▶

Remove the cookware. Wait a few seconds. Touch any button. When the fault display
goes out, you can continue cooking.

▶

Wait until the electronics have cooled down sufficiently before switching the cooking
zone back on.

Transfer settings is not activated.

▶

Touch any button to confirm the fault display. You can continue to cook as normal
without using the Transfer settings function. Contact customer service.

The cooking zone has been operating continuously for an extended period.

▶

Individual safety switch-off is switched on. Touch any button to switch off the display so
that you can set the cooking zone.

▶

Contact your energy supplier.

21

en Disposal

Fault Cause and troubleshooting

/ The hob is not connected correctly.

▶

Disconnect the hob from the mains. Connect the hob in accordance with the circuit dia­gram.

Demo mode is activated.

▶

Switch off demo mode in the basic settings.

HomeConnect is not
working properly.

The hood control is
not working properly.

Animations on the

displays

Different causes are possible.

▶

Go to www.home-connect.com.

The hood control functions do not switch on.

▶

Resetting and re-pairing the settings of the Wi-Fi home network

In certain circumstances, the hob can perform self-maintenance tasks, e.g. a firmware up­date, optimisation or troubleshooting.

▶

Wait until the process is complete and only then switch the hob on.

25.3 Normal noises from your appliance

An induction hob may sometimes cause noises or vi­brations, such as buzzing, crackling, hissing noises, fan
noises or rhythmic noises.

Disposal

26  Disposal

26.1 Disposing of old appliance

Valuable raw materials can be reused by recycling.

1.

Unplug the appliance from the mains.

2.

Cut through the power cord.

3.

Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author­ity.

Customer Service

27  Customer Service

Function-relevant genuine spare parts according to the
corresponding Ecodesign Order can be obtained from
Customer Service for a period of at least 10 years from
the date on which your appliance was placed on the
market within the European Economic Area.

Note:Under the terms of the manufacturer's warranty
the use of Customer Service is free of charge.

Detailed information on the warranty period and terms
of warranty in your country is available from our after­sales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.), the production number (FD)
and the consecutive numbering (Z-Nr.) of your appli­ance.
The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.

This appliance is labelled in accord­ance with European Directive
2012/19/EU concerning used elec­trical and electronic appliances
(waste electrical and electronic equip­ment - WEEE).
The guideline determines the frame­work for the return and recycling of
used appliances as applicable
throughout the EU.

27.1 Product number (E-Nr.), production
number (FD) and consecutive numbering (Z­Nr.)

You can find the product number (E-Nr.), the produc­tion number (FD) and the consecutive numbering (Z­Nr.) on the appliance's rating plate.
The rating plate can be found:

¡ on the appliance certificate.
¡ on the lower section of the hob.

The product number (E no.) can also be found on the
glass ceramic. You can also display the customer ser­vice index (KI) and the production number (FD) in the
basic settings. →Page16
Make a note of your appliance's details and the Cus­tomer Service telephone number to find them again
quickly.

Information regarding Free and Open Source Software

28  Information regarding Free and Open Source Software

This product includes software components that are li­censed by the copyright holders as free or open
source software.

22

The applicable licence information is stored on your
home appliance. You can also access the applicable li­cence information via your HomeConnect app: "Profile

Declaration of Conformity en

-> Legal information -> Licence Information".1 You can
download the licence information on the brand product
website. (Please search on the product website for
your appliance model and additional documents). Al­ternatively, you can request the relevant information
from [e-mail] or BSH Hausgeräte GmbH,
Carl-Wery-Str. 34, 81739 Munich, Germany.
The source code will be made available to you on re­quest.

Declaration of Conformity

29  Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the appli­ance with Home Connect functionality conforms to the
essential requirements and other relevant provisions of
Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.bosch-home.com among the additional
documents on the product page for your appliance.

Please send your request to [e-mail] or
BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Mu­nich, Germany.
Subject: „OSSREQUEST“
The cost of performing your request will be charged to
you. This offer is valid for three years from the date of
purchase or at least as long as we offer support and
spare parts for the relevant appliance.

Hereby, BSH Hausgeräte GmbH declares that the ap­pliance with HomeConnect functionality is in compli­ance with relevant statutory requirements.

2

A detailed Declaration of Conformity can be found on­line at www.bosch-home.co.uk among the additional
documents on the product page for your appliance.

2

2.4 GHz band (2400–2483.5MHz): Max. 100mW
5-GHz band (5150–5350MHz + 5470–5725MHz):
max. 130mW

BE BG CZ DK DE EE IE EL ES
FR HR IT CY LI LV LT LU HU
MT NL AT PL PT RO SI SK FI
SE NO CH TR IS UK (NI)

5GHz WLAN (Wi-Fi): For indoor use only.

AL BA MD ME MK RS UK UA
5GHz WLAN (Wi-Fi): For indoor use only.

Test dishes

30  Test dishes

These recommended settings are intended for test in­stitutes to facilitate the testing of our appliances. The
tests were carried out using our cookware sets for in­duction hobs. If required, these accessory sets can be
purchased at a later point from specialist retailers, or
through our technical after-sales service or our online
shop.

30.1 Melting the chocolate coating

Ingredients: 150 g dark chocolate (55% cocoa).
¡ 16 cm saucepan without lid

– Boiling: Power level 1.5

30.2 Heating and keeping lentil stew warm

Recipe in accordance with DIN 44550
Initial temperature 20°C
Heating up without stirring
¡ 16 cm saucepan with lid, amount: 450g

– Heating up: Duration 1 min. 30 sec., power level

9

– Simmering: Power level 1.5

¡ 20 cm saucepan with lid, amount: 800g

– Heating up: Duration 2 min. 30 sec., power level

9

– Simmering: Power level 1.5

1

Depending on the appliance specifications

2

Only applies to Great Britain

23

en Test dishes

30.3 Heating and keeping lentil stew warm

E.g.: Lentil diameter 5–7 mm. Initial temperature 20 °C
Stir after heating for 1 minute
¡ 16 cm saucepan with lid, amount: 500g

– Heating up: Duration approx. 1 min. 30 sec.,

power level 9

– Simmering: Power level 1.5

¡ 20 cm saucepan with lid, amount: 1kg

– Heating up: Duration approx. 2 min. 30 sec.,

power level 9

– Simmering: Power level 1.5

30.4 Béchamel sauce

Milk temperature: 7 °C
¡ 16 cm saucepan without lid, ingredients: 40 g but-

ter, 40 g flour, 0.5 l milk with 3.5% fat content and a
pinch of salt

Preparing Béchamel sauce

1.

Melt the butter, stir in the flour and salt, and heat up
the mixture.

‒ Heating up: Duration 6 min., power level 2

2.

Add the milk to the roux and bring to the boil, stir­ring continuously.

‒ Heating up: Duration 6 min. 30 sec., power level

7

3.

Once the Béchamel sauce comes to the boil, leave
it on the cooking zone for a further two minutes.

‒ Simmering: Power level 2

30.5 Cooking rice pudding with the lid on

Milk temperature: 7 °C

1. Heat the milk until it starts to rise up. Heat up without
a lid. Stir after heating for 10 min.

2. Set the recommended power level and add rice,
sugar and salt to the milk.
The cooking time, including heating up, is approx. 45
minutes.
¡ 16 cm saucepan, ingredients: 190g short-grain

rice, 90g sugar, 750ml milk with 3.5% fat content
and 1 g salt
– Heating up: Duration approx. 5 min. 30 sec.,

power level 8.5

– Simmering: Power level 3

¡ 20 cm saucepan, ingredients: 250g short-grain

rice, 120g sugar, 1l milk with 3.5% fat content and

1.5 g salt
– Heating up: Duration approx. 5 min. 30 sec.,

power level 8.5

– Simmering: Power level 3, stir after 10 minutes

30.6 Cooking rice pudding without a lid

Milk temperature: 7 °C

1. Add the ingredients to the milk and heat the mixture
up while stirring continuously.

2. Once the milk has reached approx. 90°C, select the
recommended power level and leave it to simmer on a
low heat for approx. 50minutes.
¡ 16 cm saucepan without lid, ingredients: 190g

short-grain rice, 90g sugar, 750ml milk with 3.5%
fat content and 1 g salt
– Heating up: Duration approx. 5 min. 30 sec.,

power level 8.5

– Simmering: Power level 3

¡ 20 cm saucepan without lid, ingredients: 250g

short-grain rice, 120g sugar, 1l milk with 3.5% fat
content and 1.5 g salt
– Heating up: Duration approx. 5 min. 30 sec.,

power level 8.5

– Simmering: Power level 2.5

30.7 Cooking rice

Recipe in accordance with DIN 44550
Water temperature: 20°C
¡ 16 cm saucepan with lid, ingredients: 125g long-

grain rice, 300 g water and a pinch of salt
– Heating up: Duration approx. 2 min. 30 sec.,

power level 9

– Simmering: Power level 2

¡ 20 cm saucepan with lid, ingredients: 250g long-

grain rice, 600 g water and a pinch of salt
– Heating up: Duration approx. 2 min. 30 sec.,

power level 9

– Simmering: Power level 2.5

30.8 Roasting a pork loin

Initial temperature of the loin: 7°C
¡ 24cm pan without lid, ingredients: 3 pork loins,

total weight approx. 300g, 1cm thick, and 15g
sunflower oil
– Heating up: Duration approx. 1 min. 30 sec.,

power level 9

– Simmering: Power level 7

30.9 Preparing crêpes

Recipe in accordance with DIN EN 60350-2
¡ 24 cm pan without lid, ingredients: 55 ml batter per

crêpe
– Heating up: Duration 1 min. 30 sec., power level

9

– Simmering: Power level 7

24

30.10 Deep-fat frying frozen chips

¡ Pot dia. 20 cm without lid: ingredients: 2 l sunflower

oil. For each frying time: 200 g frozen chips, 1 cm
thick.
– Heating up: Power level 9, until the oil temperat-

ure reaches 180 °C.

– Simmering: Power level 9

Thank you for buying a
Bosch Home Appliance!

Register your new device on MyBosch now and profit directly from:

• Expert tips & tricks for your appliance

• Warranty extension options

• Discounts for accessories & spare-parts

• Digital manual and all appliance data at hand

• Easy access to Bosch Home Appliances Service

Free and easy registration – also on mobile phones:

www.bosch-home.com/welcome

Looking for help?
You'll find it here.

Expert advice for your Bosch home appliances, help with problems
or a repair from Bosch experts.
Find out everything about the many ways Bosch can support you:
www.bosch-home.com/service
Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH

Carl-Wery-Straße 34
81739 München, GERMANY
www.bosch-home.com

Valid within Great Britain:

A Bosch Company

*9001794505*

9001794505 (031107)
en

Imported to Great Britain by
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom