Bosch NWD-455V03-10P, NWD-455V03-20P, NWD-455V04-10P, NWD-455V04-20P, NWD-455V09-10P Specifications
...
CCTV | NWD‑455 FlexiDome IP Cameras
The NWD-455 FlexiDome IP is a high-performance, 1/3inch CCD network camera, designed to ensure the highest
possible image quality at all times. This ultra-compact and
vandal-resistant camera provides DVD-like quality MPEG-4
video at up to 25 and 30 images per second (for PAL and
NTSC respectively) or H.264 encoding. Network video
signals are sent over IP networks and can be received and
displayed on a PC web browser, viewed and recorded
using the DiBos hybrid recording system, or managed as
part of a VIDOS or BVMS video management system.
Moreover, a BOSCH Video over IP (BVIP) decoder can
decode the stream for viewing on a CVBS or VGA monitor.
FlexiDome IP uses H.264 or MPEG-4 compression,
bandwidth throttling, and multicasting capabilities to
manage bandwidth and storage requirements efficiently,
while delivering the best image quality and resolution. The
analog video service output and the on-screen displays
(OSD) simplify focus adjustment and network
configuration, leading to lower installation and support
costs. Power over Ethernet (PoE) makes installation
easier and more cost-effective, since these cameras no
longer require AC power.
Functions
H.264 Baseline Profile Encoding
Firmware version 4.0 and higher enables the camera to
use H.264 Baseline Profile to encode the video signal. This
reduces the required bit rate for a given quality setting, or
increases the quality while keeping the bit rate setting.
Because H.264 Baseline Profile does not support field
encoding, interlaced video is not possible, thus resolution
is limited to a maximum of 2CIF. H.264 encoding requires
double the performance in respect to MPEG‑4. Frame rate
values must therefore be divided by two.
MPEG-4 video encoding
The FlexiDome MPEG-4 encoder creates high-quality
streaming video at low bit rates, minimizing bandwidth
and storage requirements, which further reduces costs.
Each FlexiDome IP camera can deliver up to 25 and 30
images per second (PAL and NTSC) at true 4CIF video
resolution.
ONVIF
ONVIF (Open Network video Interface Forum) compliancy
ensures integration with third party management systems
and video network devices.
NWD‑455 FlexiDome IP Cameras
▶
High-impact, vandal-resistant enclosure
▶
Advanced color CCD network dome camera
▶
NightSense for low light situations
▶
High-performance H.264, MPEG-4, and M-JPEG
▶
Direct-to-iSCSI recording
▶
Storage efficient tri-streaming: Dual MPEG-4/H.264
and M-JPEG simultaneously
▶
Power over Ethernet (IEEE 802.3af compliant)
▶
ONVIF conformant
www.boschsecurity.com
2 | NWD‑455 FlexiDome IP Cameras
Intelligence
The FlexiDome IP supports increased intelligence at the
edge that provides powerful tamper detection for various
combined picture cases arising from: video loss, masking,
hooding, defocusing, and diverted camera. Bosch also
offers Intelligent Video Motion Detection (IVMD) as an
additional licensable option. This provides video content
analysis (VCA) directly at the video input for even more
advanced VCA.
Tri-streaming video
FlexiDome IP cameras can generate two separate H.264/
MPEG-4 video streams and one JPEG stream
simultaneously, while giving access to five users at a time.
This advanced tri-streaming capability, not typically found
in other IP CCTV systems, enables the user to optimize
live viewing and recording requirements to meet specific
site and enterprise needs. For example, BOSCH Video
over IP Systems (BVIP) can be configured to record video
at one quality setting (e.g. 3.75 IPS at 2CIF), while
simultaneously providing live images at the best possible
image quality (e.g. 30 IPS at 4CIF). Alternatively, the
system deliver a high bandwidth, H.264/MPEG-4 stream to
a local LAN user, while simultaneously streaming a low
bandwidth H.264/MPEG-4 stream to a remote user over a
WAN connection, while using the JPEG stream for remote
viewing, for instance, on a PDA.
Power options
Three power options, PoE, 24 VAC (12 to 28 VAC) and
12 VDC (+11 to +36 VDC), are available on the NWD-455.
Utilizing PoE makes installation easier and more costeffective, since cameras do not require a local AC power
source. Additionally, they can use an uninterruptible
power supply (UPS), which will allow continuous
operation, even during a power failure, e.g. in
emergencies.
OSD-based network setup
Network parameters and basic camera set-up, such as
lens set-up and back focus, are quickly and easily
performed using the on-screen displays (OSD) and analog
video service output. Unlike other IP cameras, no network
connection, PC configuration utilities, or other tools are
required to set up FlexiDome IP.
Recording
The FlexiDome IP cameras offer unparalleled recording
options – network-attached utilizing iSCSI devices, and of
course centrally, using network video recorders (NVRs).
The iSCSI RAID 5 storage support enables a camera to act
as a conventional DVR, while streaming high-performance
live video across the network. The cameras also offers
10 Mb internal RAM storage.
Certifications and Approvals
Region Certification
Europe CE Declaration of Conformity
USA FCC Declaration of Conformity
Safety acc. to EN 60950-1 (CE)
acc. to UL 60950-1
Immunity acc. to EN 50130-4 (CE)
Emission acc. to EN 55022 class B (CE)
acc. to EN 61000-3-2 (CE); EN 61000-3-3 (CE)
acc. to FCC CFR 47 Part 15, Class B
acc. to AS/NZS CISPR 22 (equal to CISPR 22)
Installation/Configuration Notes
____
NWD
____
455
03
04
09
V
_
10
20
____
P
____
1 03 2.6 to 6 mm F1.4
04 3.7 to 12 mm F1.6
09 9 to 22 mm F1.4
2 10 PAL color or CCIR mono
20 NTSC color or EIA mono
Dimensions in mm (in)
Loading...