Bosch MSM7800AU Operating Instructions Manual
MSM7800AU
en Operating instructions
en Australia ...................................................................................................................3
...................................................................................................
2 Robert Bosch Hausgeräte GmbH
Congratulations on the purchase of your
new BOSCH appliance. Bosch products
are modern, high-quality domestic
appliances. For more information on our
products, please visit our web page.
This appliance is intended for processing
normal domestic quantities of food in the
household or for similar, non-commercial
applications. Examples of similar,
non-commercial applications include
use in staff kitchens in shops, offi ces,
agricultural and other businesses, and
for use by guests in guesthouses, small
hotels, and similar residential facilities.
This appliance should only be used for
processing normal domestic quantities of
food and for usual durations (see table, Fig.
G). Store the instruction manual in a safe
place.
If selling or passing on the appliance
to another person, always supply the
instruction manual. The appliance is
maintenance-free. The manufacturer is not
liable for any damages resulting from noncompliance with the instructions for correct
use of the appliance.
At a glance
Fold out the picture pages.
Fig. A
1 Stainless steel mixer foot
Insert the mixer foot and click it into
place.
2 Basic unit
3 Mains cable
4 Suspension
For storing the appliance in a hanging
position.
5 Speed display
6 Speed control
Infi nitely variable rotary speed
(only in conjunction with button 7a).
- Turning to the right reduces the rotary
speed.
- Turning to the left increases the rotary
speed.
en
7 On/Off button
a Adjustable speed
(with speed control 6)
b Turbo speed
The blender is switched on for as long as
the On/Off button (a or b) is pressed.
8 Release buttons
To release the accessory, push both
release buttons at the same time.
9 Mixer foot blade
10 Mixing beaker
Working in the mixing beaker prevents
the mixed products from spraying out.
Place the lid on the mixing beaker to
store processed foods.
Multi-function accessory with tools
11 Bowl
12 Drive unit
13 Pusher
14 Universal blade
15 Carrier disc for disc inserts
15A Cutting insert - coarse
15B Cutting insert - fi ne
15F Grater insert - medium-fi ne
15G Grating disc insert - coarse
16 Whisk with drive unit
Safety information
Risk of injury
Risk of electric shock
Only connect and operate the appliance
according to the specifi cations on the
rating plate. Do not use if the power cable
or appliance show signs of damage. Keep
out of the reach of children. Children must
be supervised to ensure that they do
not play with the appliance. Do not allow
persons (including children) with reduced
sensory perception or mental capacity, or
with insuffi cient knowledge or experience
to operate the appliance, unless they are
under supervision or have been instructed
in the use of the appliance by a person
responsible for their safety. Disconnect the
plug before assembly, after use, before
Robert Bosch Hausgeräte GmbH 3
en
cleaning, before leaving the room and in
the event of a malfunction. Do not stretch
the power cable across sharp edges or hot
surfaces. If the power cable of this appliance
is damaged, it must be replaced by the
manufacturer, their after-sales service or a
similarly qualifi ed person in order to prevent
hazards. Repairs to the appliance must only
be performed by our after-sales service.
Do not use the blender with wet hands and
do not operate it while empty. Only operate
the blender using original accessories. Take
care when processing hot liquids. Liquids
may spray out during processing.
Do not immerse the appliance in liquid
further than the join between the mixer
foot and basic unit, and never hold under
running water. Never immerse the drive
unit of the multi-function accessory in water
and do not put it in the dishwasher. The
detachable shaft can be briefl y rinsed under
running water.
It is recommended that you do not leave
the appliance switched on for longer than is
required to process the required food.
Never place the mixer foot onto hot surfaces
and do not use to mix very hot products.
Allow hot food products to cool to 80 °C or
below before processing with the mixer foot.
Only switch on the appliance once the tools
and accessories are fully fi tted.
Only change the tools and accessories
when the appliance has come to a
complete stop and the mains plug has been
unplugged.
The bowl of the multi-function accessory
must not be used to heat food in a
microwave. The bowl must only be used for
its intended purpose.
Overload fuse
If the appliance overloads (for example,
due to long periods of use or because
excess pressure is exerted on the food to
be chopped or grated using the pusher), the
overload fuse switches the appliance off.
See »Troubleshooting«.
Explanation of symbols on the appliance
and accessories
Caution: Rotating tools.
Do not insert fi ngers into the fi lling
opening.
Operation
Clean the appliance and accessories
thoroughly before using for the fi rst time, see
»Cleaning and care«.
Blender
Risk of injury due to sharp blade/
rotating drive
Never touch the blade on the mixer foot.
Do not clean the mixer foot blade using
bare hands. Always use a brush.
Important:
Only fi t and remove the mixer foot when
the appliance has come to a complete
stop.
For mixing mayonnaise, sauces, mixed
drinks, baby food, cooked fruit and
vegetables. For pureeing soups.
The blender is not suitable for
preparing mashed potato.
Preparation
Fig. B
• Clean all parts before use.
• Fully unwind the mains cable.
• Insert the mixer foot into the basic unit
and click into place.
• Plug in the mains plug.
• Place the food in the mixing beaker or
similar high-sided beaker.
The blender works better if the food
to be processed contains some
liquid.
• Set the required speed using the speed
regulator.
- Turning to the right reduces the
rotary speed.
- Turning to the left increases the
rotary speed.
4 Robert Bosch Hausgeräte GmbH
In general, the turbo speed is
recommended for processing food. For
liquids, hot foodstuffs and for mixing
together solids and liquids (e.g. muesli
into yoghurt), it is advisable to use the
speed control.
The current speed is shown in the
speed display when the On/Off button is
activated. The more segments that light
up, the higher the set speed.
• Hold the blender and beaker fi rmly.
• Switch on the blender by pressing the
required On/Off button.
The blender remains switched on for
as long as the On/Off button is
pressed.
To prevent the mixing products from
spraying out, do not press the On/Off
button until the mixer foot is
immersed in the food to be mixed.
Always switch off the blender before
extracting it from the mixed food.
• When you have fi nished processing the
food, release the On/Off button.
• Unplug the mains plug.
• Press the release buttons and remove
the mixer foot from the basic unit.
Multi-function accessory with tools
Risk of injury due to sharp blade/
rotating drive
Never insert fi ngers into the bowl during
operation. Always use the pusher (13) to
push ingredients into the beaker.
The drive continues to run for a short
time after the blender is switched off. Do
not change the tool until the drive has
come to a complete stop.
When working with the multi-function
accessory, the appliance can only be
switched on if the drive unit is screwed
tightly in place.
Important:
Only fi t and remove the basic unit to/
from the drive unit of the multi-function
accessory when the appliance has come
to a complete stop.
en
Universal blade (14)
For chopping meat, hard cheese, onions,
herbs, garlic, fruit, vegetables, nuts,
and almonds. It is important to note the
maximum quantities in the table (Fig. G).
Risk of injury due to sharp blade.
Never touch the blade in the bowl.
Do not clean the universal blade using
bare hands. Always use a brush.
Only handle the universal blade by the
plastic part.
Caution:
Before chopping meat, ensure that
all gristle, bones and tendons have been
removed. The multi-function accessory
is not suitable for chopping very hard
materials (e.g. coffee beans, radishes,
nutmeg) or frozen food (e.g. fruit).
Preparation
Fig. C
• Place the bowl on a smooth, clean work
surface and press down.
• Insert the blade.
• Place the food in the bowl.
• Place the drive unit on the bowl with the
pusher inserted (align arrow a on the
drive unit with any catch b on the bowl)
and turn in an anti-clockwise direction
until it clicks into place.
If the bowl contains larger quantities
of ingredients, it may be diffi cult to fi t
the drive cover. If required, twist the
three-winged coupling on the
underside of the drive unit into the
correct position.
When locking the drive cover in
place, ensure that the shaft of the
cutting knife is sitting vertically in the
beaker (see picture C-4b).
• Place the basic unit on the drive unit and
allow to click into place.
Ensure that the appliance audibly
engages into position on the drive
insert. Otherwise, the appliance
coupling may be seriously damaged.
• Plug in the mains plug.
Robert Bosch Hausgeräte GmbH 5
Loading...