Bosch ISC-PDL1-WAC30G Specsheet

Intrusion Alarm Systems | Professional Series TriTech+ Curtain Motion Detectors with Anti-mask

Professional Series TriTech+ Curtain

Motion Detectors with Anti-mask

www.boschsecurity.com

u 30 m x 2.6 m (100 ft x 8.5 ft) standard coverage

u EN50131-2-4 Grade 3 compliant

u Sensor data fusion technology

u Tri-focus optics technology

u Range adaptive radar

The ISC-PDL1-WAC30x Professional Series TriTech+

Curtain Detectors with Anti-mask are exceptionally

suited for commercial indoor applications. MANTIS

anti-mask technology makes obscuring the detector

view nearly impossible for intruders. Sensor data

fusion technology ensures that the detector sends

alarm conditions based on precise information.

Tri‑focus optics eliminate coverage gaps and respond

efficiently to intruders. The powerful combination of

unique features in the Professional Series delivers

superior catch performance and virtually eliminates

false alarms.

The self-locking two-piece enclosure, built-in bubble

level, flexible mounting height, and three optional

mounting brackets simplify installation and reduce

service time.

Functions

Sensor data fusion technology

Sensor data fusion technology is a unique feature that

uses a sophisticated software algorithm to gather

signals from five sensors: two pyroelectric sensors, a

range adaptive radar sensor, a room temperature

sensor, and a white light level sensor. The

microcontroller analyzes and compares the sensor

data to make the most intelligent alarm decisions in

the security industry.

Tri-focus optics technology

Tri-focus optics technology uses optics with three

specific focal lengths: long-range coverage, middle-

range coverage, and short-range coverage. The

detector applies the three focal lengths to 14

detection zones, which combine to make a solid

curtains of detection. Tri-focus optics technology also

includes two pyroelectric sensors, which deliver twice

the standard optical gain. The sensors process

multiple signals to deliver precise performance

virtually free of false alarms.

Range adaptive radar

The microwave transceiver automatically adjusts its

detection thresholds based on input from the PIR

sensors. Integrating the target distance information

from the PIR significantly reduces false alarms from

the microwave Doppler radar.

MANTIS Anti-mask technology

MANTIS (Multi-point Anti-mask with Integrated Spray

detection) uses patented prism lenses and active

infrared detection to provide industry-leading

protection against all known forms of attack. MANTIS

complies with the latest worldwide regulatory

standards for detecting objects covering or placed in

front of the detector. MANTIS is sensitive to materials

regardless of texture or color, including fabric, paper,

metal, plastic, tape, and spray. When MANTIS

identifies a masking material, the detector sends a

supervision anti-mask signal to the control panel.

Active white light suppression

An internal light sensor measures the level of light

intensity directed at the face of the detector. Sensor

data fusion technology uses this information to

eliminate false alarms from bright light sources.

Dynamic temperature compensation

The detector automatically adjusts PIR sensitivity to

identify human intruders at critical temperatures.

Dynamic temperature compensation detects human

body heat accurately, avoids false alarms, and delivers

consistent catch performance at all operating

temperatures.

Cover and wall tamper switch

When an intruder removes the cover or attempts to

separate the detector from the wall, a normally-closed

contact opens to alert the control panel.

Self-adjusting LEDs

The LED brightness adjusts automatically to the

surrounding light level. A blue light-emitting diode

(LED) indicates TriTech+ alarms and activates during a

walk test. A yellow LED indicates microwave

detection, and a red LED indicates PIR detection.

Remote walk test LED

Users can enter a command through a keypad, a

control center, or programming software to remotely

enable or disable the walk test LED.

Alarm memory

Alarm memory flashes the alarm LED to indicate

stored alarms for use in multiple unit applications. A

switched voltage from the control panel controls the

alarm memory.

Solid state relays

Solid state relays send silent alarm output signals to

provide a higher level of security and reliability. An

external magnet does not activate the relay. The solid

state relay uses less current than a mechanical relay,

providing longer standby capacity during a power loss.

Draft, insect, and small animal immunity

The sealed optic chamber provides immunity to drafts

and insects, reducing false alarms. Small animal

immunity reduces false alarms caused by animals less

than 4.5 kg (10 lb), such as rodents.

Remote self test

A remote self test initiates when the walk test input

switches to its true state. The alarm relay and alarm

LED activate for four seconds following a successful

test. The trouble relay activates, and the alarm LED

flashes following a failed test.

Input power supervision

When the power is lower than 8 V, a low input power

trouble condition activates the trouble relay and

causes the LED to flash. The trouble condition clears

automatically when power reaches or exceeds 8 V.

Trouble memory

When the walk test input switches to its true state for

less than two seconds, the LED flashes to indicate the

most recent trouble condition. If there is no trouble in

memory, the LED does not flash. After twelve hours, or

after the detector receives a second walk test pulse

for two seconds or less, the LED stops flashing and

the trouble memory clears.

DIP switch programming

The following functions are all programmed using DIP

switch settings:

• Local Walk Test LED

• Remote Walk Test Input Polarity

• Alarm Memory Polarity

• Long and Short Range Select

• MANTIS Anti-mask On and Off

Certifications and approvals

Region Certification

Europe CE EMC, LVD, R&TTE ISC-PDL1-WAC30G,

ISC-PDL1-WAC30H

Sweden SBSC ISC-PDL1-WAC30G, Alarm Class 3/4,

Environmental Class II (Larmklass 3/4

miljöklass II)

France AFNOR ISC-PDL1-WAC30G

AFNOR ISC-PDL1-WAC30H

Installation/configuration notes

Long-range coverage 30 m x 2.6 m (100 ft x 8.5 ft)

Mounting

The recommended mounting height is 2 m to 3 m

(7 ft to 10 ft) with no adjustments required.

Mount the motion detector level, both horizontally and

vertically.

Mounting options:

2

| Professional Series TriTech+ Curtain Motion Detectors with Anti-mask