Bosch ISC-FPB1-W60QS, ISC-FPB1-W60QF, ISC-FPB1-W200QS, ISC-FPB1-W200QF, ISC-FPB1-W120QS Specsheet

Intrusion Alarm Systems | Photobeam 5000

Photobeam 5000

www.boschsecurity.com

u Quad beam detection

u Environmental discrimination circuit

u Beam power control to reduce cross-talk

The Photobeam 5000 Series consists of the single
channel quad beam ISC-FPB1-W60QS, ISC-FPB1­W120QS, ISC-FPB1-W200QS, and the four channel
quad beam ISC-FPB1-W60QF, ISC-FPB1-W120QF, and
ISC-FPB1-W200QF detectors with separate
transmitters and receivers.
The detector series uses four pulsed infrared beams
that are designed to activate an alarm when all four
beams are simultaneously blocked. False alarm
immunity is increased by the utilization of four beams
compared to single or dual beam models.
The detector series also features interlocked upper
and lower beams, signal voltage LED, and optional
environmental discrimination circuitry.

System overview

Consisting of a separate transmitter and receiver, it is
designed to activate an alarm when an intruder passes
within the direct line of sight between the transmitter
and receiver.

Functions

Mounting features

Mounting and installing the detector is now easier
than ever. Install the detector through easy-to-use
mounting hole locations which provide an enlarged
entry point of access to accept small to large, single or
multiple cable set wires. Fastening screw locations
eliminate the need for unnecessary crawling or
bending during installation.

Multiple Channel Operation (4-channel models only)

Configure the detectors for up to four different
channels. This allows multiple units to be used near
one another without the possibility of receiver cross­talk. This is particularly useful when stacking multiple
beam sets.

High Density mode (4-channel models only)

The High Density mode allows you to add an additional
zones of protection to detect larger objects that only
partly interrupt the beams of individual devices. This
feature allows an alarm condition to be generated
when beam pairs are interrupted on adjacent devices
but not all four beams are interrupted on one device.

2 | Photobeam 5000

Selectable AND/OR mode (4-channel models only)

This feature allows an added level of detection by
generating an alarm when four beams from two units
are blocked simultaneously. Environmental conditions
require higher false alarm tolerance against smaller
objects passing through the detector's line of sight. To
do this, set the AND/OR gate option to AND gate mode
that only causes an alarm condition when all four
infrared beams are interrupted simultaneously.
High Security applications might require the detection
of smaller objects passing through the detector's line
of sight. To do this, set the AND/OR gate option to OR
gate mode that causes an alarm condition when either
the upper two beams or the lower two beams are
interrupted.

Dust/insect cover features

The included foam sealing ensures that the detectors
are properly secured from insects and other
environmental elements such as humidity and
temperature fluctuations.
The improved cover design includes water flow
channels to prevent water and dirt from accumulating
in front of optic components, and eliminates the need
for additional weatherproofing solutions.

Environmental Discrimination Circuit

Monitors gradual loss of signal due to dust, fog, rain,
and snow. Normally closed output opens when signal
loss reaches 90%. May be field configured to bypass
alarm relay when activated.

Beam Power Control

The transmitter power output is field adjustable
allowing the user to eliminate reflections and cross­talk from other units.
This feature improves catch performance and false
alarm immunity, and allows for reliable installation in
most applications.

Test features

High visibility reception level LED improves ease of
installation. Flash rate increases as installation
alignment improves.
Voltage output terminals also allow for improved
alignment accuracy.
Optical module alignment switch to allow for
independent adjustment of upper and lower beam
pairs.

Dual Modulated beam

The Dual Modulated Beam eliminates interference
from external noise sources such as sunlight, car
headlights, electrical interference, etc.

Certifications and approvals

Region Certification

Europe CE EMC, RoHS [ISC-FPB1-W60QF, ISC-

CE EMC, RoHS [ISC-FPB1-W60QS, ISC-

FPB1-W120QF, ISC-FPB1-W200QF
with or wihout BH12T heater]

FPB1-W120QS, ISC-FPB1-W200QS
with or without BH12T heater]

Technical specifications

Photobeam

ISC-FPB1-

W60QS

Maximum
indoor range

Maximum
outdoor range

* Single channel quad beam series

ISC-FPB1-

Maximum
indoor range

Maximum
outdoor range

* Four channel quad beam series

120 m
(393 ft)

60 m
(196 ft)

W60QF

120 m
(393 ft)

60 m
(196 ft)

ISC-FPB1­W120QS

240 m
(787 ft)

120 m
(393 ft)

ISC-FPB1­W120QF

240 m
(787 ft)

120 m
(393 ft)

ISC-FPB1­W200QS

400 m
(1312 ft)

200 m
(656 ft)

ISC-FPB1­W200QF

400 m
(1312 ft)

200 m
(656 ft)

Environmental considerations

Operating temperature -25°C to +60°C (-13°F to +140°F) (96%

or less)

Storage temperature/
humidity

IP rating (indoor) IP66

-30°C to +70°C (-22°F to +158°F)
Relative Humidity 96%

Mounting considerations

Location Pole mount or surface mount

Horizontal adjustability ±90°

Vertical adjustability ±10°

Distance between upper
and lower lens

245 mm (9.64 in)

Dimensions

Dimensions 103 mm x 398 mm x 99 mm

(4.05 in. x 15.66 in. x 3.89 in.)