Bosch ISC-BPR2-WP12, ISC-BPR2-W12 Specsheet

Page 1
Intrusion Alarm Systems | Blue Line Gen2 PIR Motion Detectors
Blue Line Gen2 PIR Motion Detectors
www.boschsecurity.com
u Wall to Wall coverage – Superior catch performance
within 12 m x 12 m (40 ft x 40 ft) coverage area
u Pet‑friendly Selectable model available – optimize
The Blue Line Gen2 PIR Motion Detectors (ISC-BPR2) use two Fresnel lenses designed to produce sharply­focused images throughout the field of view providing superior response to intruders. These lenses provide a high density (77 zone) 7‑layer pattern, and the selectable lookdown lens provides an additional three lookdown zones. Easy installation and flexible mounting options provide state-of-the-art detection. The pet‑friendly (-WP) generates alarm signals for human intruders without generating false alarm signals for pets.
Functions
First Step Processing (FSP)
First Step Processing (FSP) almost instantly responds to human targets without producing false alarms from other sources. FSP adjusts the detector's sensitivity based on signal amplitude, polarity, slope, and timing. This eliminates the need for the installer to select the sensitivity level, thus improving ease of installation and reliability.
u Dynamic Temperature Compensation – superior
catch performance in any environment
u Flexible Mounting Height, No Adjustments – reduce
installation time and false alarms, improve catch performance
u Self-locking Enclosure with Integrated Bubble Level
– reduce installation time
Pet‑friendly Selectivity (‑WP models only)
The installer can turn pet immunity on or off based upon application requirements. When pet immunity is turned off, the detector provides superior catch performance identical to the non‑pet models. When pet immunity is turned on, the detector can distinguish between signals caused by humans and signals caused by pets. It ignores signals caused by one or two pets up to 20 kg (45 lb) or numerous rodents.
Dynamic Temperature Compensation
The detector intelligently adjusts its sensitivity so that it can identify human intruders at virtually any temperature.
Wall-to-Wall Coverage
An improved lookdown zone and coverage range of 12 m x 12 m (40 ft x 40 ft) provide wall-to-wall coverage.
Self-locking Enclosure
The sliding self‑locking enclosure has an integrated bubble level and custom gap‑free, lift‑gate style terminal blocks to make installation easier.
Page 2
2 | Blue Line Gen2 PIR Motion Detectors
Sealed Optics and Electronics
The optics and electronics are assembled into the front enclosure and sealed with a protective cover to prevent damage during installation. The sealed optical chamber also prevents drafts and insects from affecting the detector.
Test Features
Externally visible alarm LED can be disabled after installation.
Certifications and approvals
These detectors are also designed to comply with the following:
Europe Complies with EN50131-2-2 Grade 2
Complies with EN50130-5 Class II
Complies with EN60529, EN50102 (IP30, IK04)
Complies with Directive 2002/95/EC - Restriction of the
use of certain Hazardous Substances (RoHS)
China Complies with CCC GB10408.1 and GB10408.5
Region Certification
Europe CE EMC, LVD [-W12, -WP12]
EN50131EN50131-2-2 [-W12]
Installation/configuration notes
Coverage Patterns
EN50131EN50131-2-2 [-WP12]
Belgium INCERT B-509-0051/d [ISC-BPR2-W12, -
USA UL cULs - ANSR: Intrusion-detection Units
France AFNOR 2620200001A0 [-W12]
AFNOR 2620200001B0 [-WP12]
China CCC 2010031901000322 [-W12-CHI, -
Sweden INTYG 11-268 [-WP12]
INTYG 11-269 [-W12]
the Nether­lands
Bulgaria GD
NCP 2011062 [ISC-BPR2-W12, -WP12, ISC-
FSPP
WP12; ISC-BPQ2-W12]
(UL 639), ANSR7: Intrusion-detection Units Certified for Canada (ULC-S306) [-W12 and -WP12]
WPC12-CHI]
BPQ2-W12, ISC-BDL2-W12G, ISC­BDL2-WP12G, ISC-BDL2-WP6G]]
GODKJENNELSESBEVIS [-W12, -WP12]
12 m x 12 m (40 ft x 40 ft) coverage
Mounting
The recommended mounting height is 2.2 m to 2.75 m (7.5 ft to 9 ft) with no adjustments required. Mount the motion detector level, both horizontally and vertically. Mounting options:
• On a flat wall (surface, semi-flush), with the optional B335-3 Swiveling low-profile mount, or with the optional B328 Gimbal-mount Bracket
• In a corner (the junction of two perpendicular walls)
• On the ceiling with the optional B338 Universal Ceiling-mount Bracket
Parts included
Quant. Component
1 Detector
Page 3
3 | Blue Line Gen2 PIR Motion Detectors
1 Hardware pack
• 2 anchors (#6, #8 x 7/8)
• 2 screws( #6 x 1.25)
• 1 cable tie (2.5 mm)
1 Literature - Installation Guide
Technical specifications
Electrical
Current (standby/alarm): 10 mA at 12 VDC
Voltage (operating): 9 VDC to 15 VDC
Environmental
Environment Complies with EN50130-5 Class II
Pet Immunity1: One or two pets up to 20 kg (45 lb) or
numerous rodents.
Relative Humidity: 0 to 95%, non-condensing
For UL Listed product installations, 0 to 85%, non-condensing
Temperature (operating): -30°C to +55°C (-20°F to +130°F)
For UL Listed product installations, 0°C to +49°C (+32°F to +120°F)
1
Applies to the Pet Friendly models only and only
when the Pet Immunity feature is turned on.
Mechanical
ISC-BPR2-W12-CHI Blue Line Gen2 PIR Motion Detector
Provides PIR, 12 m x 12 m (40 ft x 40 ft) coverage. For use in China.
Order number ISC-BPR2-W12-CHI
Color: white
Dimensions: 105 mm x 61 mm x 44 mm
(4.2 in. x 2.4 in. x 1.7 in.)
Material: High-impact ABS plastic
Radio Frequency Interference (RFI) Immunity
No alarm or setup on critical frequencies in the range from 150 kHz to 2 GHz at field strengths less than 30 V/m.
Outputs
Relay: Solid state, supervised, Form A normally-closed (NC)
contacts rated for ≤100 mA, 25 VDC, 2.5 W, <20 Ω closed
Tamper: Normally-closed (NC) contacts (with cover on) rated
for ≤100 mA, 25 VDC, 2.5 W Connect tamper circuit to 24-hour protection circuit.
Ordering information
ISC-BPR2-W12 Blue Line Gen2 PIR Motion Detector
Provides PIR, 12 m x 12 m (40 ft x 40 ft) coverage.
Order number ISC-BPR2-W12
ISC-BPR2-WP12 Blue Line Gen2 Pet Friendly PIR Motion Detector
Provides Pet Friendly PIR, 12 m x 12 m (40 ft x 40 ft) coverage.
Order number ISC-BPR2-WP12
Page 4
4 | Blue Line Gen2 PIR Motion Detectors
Represented by:
North America: Europe, Middle East, Africa: Asia-Pacific: China: Latin America and Caribbean:
Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us
Bosch Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.com
Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 apr.securitysystems@bosch.com www.boschsecurity.asia
Bosch (Shanghai) Security Systems Ltd. 203 Building, No. 333 Fuquan Road North IBP Changning District, Shanghai 200335 China Phone +86 21 22181111 Fax: +86 21 22182398 www.boschsecurity.com.cn
Robert Bosch Ltda Security Systems Division Via Anhanguera, Km 98 CEP 13065-900 Campinas, Sao Paulo, Brazil Phone: +55 19 2103 2860 Fax: +55 19 2103 2862 latam.boschsecurity@bosch.com www.boschsecurity.com
© Bosch Security Systems 2016 | Data subject to change without notice 2602384139 | en, V19, 12. Feb 2016
Loading...