Bosch DS936, DS936B Specsheet

4 m

0 m

13 ft

0 ft

Intrusion Alarm Systems | DS936 Low Profile Panoramic PIR Detector

DS936 Low Profile Panoramic PIR Detector

www.boschsecurity.com

u Enhanced signal processing

u 360° x 7.5 m (24 ft) pattern

u Surface/semi-flush mountable

The ceiling mount, low profile panoramic DS936 PIR Detector uses alternate polarity pulse count. It also uses a pointable Fresnel lens to provide up to 7.5 m (24 ft) of coverage and can be mounted on the surface, or semi-flush directly to a ceiling or a standard octagonal electrical box.

Functions

Enhanced Signal Processing

Field-selectable for standard, intermediate or high.

Test Features

External visible alarm LED. Internal noise voltage test pins provide precise pattern location and background disturbance evaluation using a standard analog meter.

Certifications and approvals

u Internal pointability

u Sealed detector chamber

Installation/configuration notes

Europe DS936 complies with EN50131‑1, Grade 2

Region Certification

Europe CE 2004/108/EC EMC Directive (EMC);

2006/95/EC Low-Voltage Directive (LVD); 2011/65/EU Restriction of the

USA UL DS936: ANSR: Intrusion Detection Units

(UL639)

China CCC DS936-CHI: 2009031901000548

Top View Broad Coverage: Up to 7.5 m x 360° (24 ft x 360°). Provides 360° coverage pattern. Coverage diameter is approximately two times the mounting height.

0 m

0 ft

4 m

13 ft13 ft

0 m

3 m11 ft

2 | DS936 Low Profile Panoramic PIR Detector

Side View Broad Coverage: Up to 7.5 m x 360° (24 ft x 360°). Provides 360° coverage pattern. Coverage diameter is approximately two times the mounting height.

Technical specifications

Enclosure Design

Material: High impact ABS plastic enclosure

Dimensions: 3.05 cm x 11.7 cm (1.2 in. x 4.6 in.)

Environmental Considerations

Operating Temperature: -29°C to +49°C (-20°F to +120°F)

Radio Frequency Interference (RFI) Immunity:

DS936: Complies with Environmental Class II

For UL Certificated installations, 0°C to +49°C (+32°F to +120°F)

No alarm or setup on critical frequencies in the range from 26 MHz to 950 MHz at 50 V/m.

(EN50130-5)

Ordering information

DS936 Low‑Profile Panoramic PIR Detector

Provides enhanced signal processing, 360° x 7.5 m (24 ft) pattern, mounts to surfaces, or mounts semi-flush into a ceiling.

Order number DS936

DS936B Low Profile Panoramic PIR Detector

Provides enhanced signal processing, 360ﾟ x 7.5 m (24 ft) pattern, mounts to surfaces, or mounts semi-flush into a ceiling. Black housing and white lens.

Order number DS936B

DS936-FRA Low Profile Panoramic PIR Detector

For use in France. Provides enhanced signal processing, 360° x 7.5 m (24 ft) pattern, mounts to surfaces, or mounts semi-flush into a ceiling.

Order number DS936-FRA

DS936‑CHI Low Profile Panoramic PIR Detector

For use in China. Provides enhanced signal processing, 360° x 7.5 m (24 ft) pattern, mounts to surfaces, or mounts semi-flush into a ceiling.

Order number DS936-CHI

Accessories

TC6000 Test Cord

Test cord for connecting a compatible detector’s test pins to a voltmeter. It is 4.6 m (15 ft) long.

Order number TC6000

Mounting

Height Range: 2 m to 3.6 m (7 ft to 12 ft)

Location: Surface or semi-flush on ceiling or on standard

Pattern Pointability:

10 cm (4 in.) octagonal electrical box

±15° rotational

Outputs

Alarm: Normally-closed reed relay rated at 3.0 W, 125 mA at

Tamper: Normally-closed cover activated tamper switch with

28 VDC for resistive loads and protected by a 4.7 Ω resistor in the common C leg.

separate terminals. Tamper contacts rated 125 mA at 28 VDC maximum.

Power Requirements

Current: 20 mA at 12 VDC

Voltage: 10 VDC to 15 VDC

+ 1 hidden pages