Depending on your handset, you can connect your
Bluetooth phone via the Bluetooth interface or the CPT
9000 via the cradle to your vehicle.
Getting started with your Bluetooth phone, refer to
page 5
Getting started with your
BMW CPT 9000, refer to page 11
The telephone can be operated using:
The multi-function steering wheel*
The Display*
The voice input system*
For how to operate your mobile phone, please read the
separate Owner's Manual.
For Bluetooth phones BMW recommends that mobile
phones be operated inside the car via the optional cradle
with external antenna. Otherwise mutual interference
between the vehicle's electronics and such equipment
cannot be entirely ruled out.
While using BMW Assist, you will not be able to operate
the BMW mobile phone until after you have completed the
service call.
Only make adjustments if the traffic conditions
permit, so as not to endanger the car's occupants
and other road users by being distracted. Using a handheld mobile phone while driving is dangerous and is illegal
in many cities. Use the telephone in conjunction with the
hands-free unit, or pull over in a suitable place where you
will not endanger other road users.
Hands-free system
The hands-free microphone is located in the headliner.
The hands-free system is switched on automatically when
you make or receive a call using the following equipment:
Button on the steering wheel
Display.
As soon as you make a call with the hands-free system,
the other audio sources are automatically muted.
Adjusting the volume
You can adjust the volume of the hands-free system during a phone call:
By using the buttons on the steering wheel
By using the Radio volume control
The volume of the hands-free system stays at the level set
here even if you lower the volume of other audio sources
to a minimum.
Overview
4