Blodgett MARK V Hatchable, MARK V Hatchable 111-H, MARK V Hatchable 112-H, MARK V Hatchable 111-HD, MARK V Hatchable 112-HD Specifications

BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
Model MARK V 111-H (Type I, Size 1, NSN 7310-01-104-2431)Model MARK V 112-H (Type II, Size 1, NSN 7310-01-385-9738)Model MARK V 111-HD (Type I, Size 2, NSN 7310-01-424-4548)Model MARK V 112-HD (Type II, Size 2, NSN 7310-01-361-6025)
EXTERIOR CONSTRUCTION
Full angle-iron frameStainless steel front, top and sidesDual pane thermal glass windows encased in stainless steel door framesLocking door mechanismModular slide out front control panel for easy accessSolid mineral fiber insulation at top, back, sides and bottom
INTERIOR CONSTRUCTION
Removeable stainless steel linerAluminized blower wheel Five chrome-plated racks, eleven rack positions with a minimum of
1-5/8" (41mm) spacing
Interior lights
OPERATION
Three tubular heatersSolid state thermostat with temperature control range of 200°F (93°C) to
500°F (260°C)
Two speed fan motor1/3 horsepower blower motor with automatic thermal overload protectionControl area cooling fanFour 50 watt commercial bake oven lamps
CAPACITIES
Models Mark V111-H and Mark V112-H - Standard depth baking compart-
ment accepts five 18" x 26" standard full-size baking pans in left-to­right positions.
Models Mark V111-HD and Mark V112-HD - Extra depth baking compartment-
accepts five 18" x 26" standard full-size baking pans in left-to-right or front-to­back positions.
STANDARD FEATURES
Solid state digital control with Cook & Hold and Pulse Plus25" (635mm) stainless steel legs with shipboard plates (for single units)8" (203mm) formed stainless steel legs with shipboard plates (for double sec-
tions)
Two year oven parts and one year labor warranty*Five year limited oven door warranty*
* For all international markets, contact your local distributor.
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Extra oven racksSolid stainless steel back
OPTIONS AND ACCESSORIES
(AT NO CHARGE)
440 volt, 3 phase480 volt, 3 phaseVent connector
MODEL MARK V Hatchable
Full Size Electric Marine Convection Oven
MARK V HATCHABLE
Project
Item No.
Quantity
All data is shown per oven section, unless otherwise indicated.
BLODGETT OVEN COMPANY
www.blodgett.com • 44 Lakeside Avenue, Burlington, VT 05401 Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
MODEL MARK V HATCHABLE
SHORT FORM SPECIFICATIONS
Provide Blodgett full-size convection oven model MARK V Hatchable, (single/double) compartment. Each compartment shall have removeable stainless steel liner and shall accept five 18" x 26" standard full-size bake pans. Doors shall (be solid stainless steel/ have dual pane thermal glass windows) with locking door mechanism. Unit shall be electrically heated with three tubular heaters. Air in baking chamber distributed by single inlet blower wheel powered by a two-speed, 1/3 HP motor with thermal overload protection. Each chamber shall be fit­ted with four commercial lamps and five chrome-plated removable racks. Control panel shall be recessed solid state digital thermostat (200 - 500°F), (93-260°C). Provide options and accessories as indicated.
DIMENSIONS (per section):
Floor space
Mark V-H 38-1/4" (972mm) W x 39-7/8" (937mm) D Mark V-HD 38-1/4" (972mm) W x 44-3/8" (937mm) D
Interior
Mark V-H 29" (737mm) W x 20" (508mm) H x 24-1/4" (616mm) D Mark V-HD 29" (737mm) W x 20" (508mm) H x 28-1/4" (718mm) D
Product clearance 1/2" (12mm) from combustible and non-combustible construction
POWER SUPPLY (per section):
V.A.C. Hz Phase K.W.H. Amperes (L1-L2-L3)
208 60 1 11 51/0/51 208 60 3 11 31/29/29 220/240 60 1 11 44/0/44 220/240 60 3 11 26/24/24 440 60 3 11 15/14/14 480 60 3 11 14/13/13 1/3 H.P., 2 speed motor, 1140 and 1725 RPM (60Hz.) This oven contains a mercury relay. DO NOT put mercury relay in trash. Relay must
be recycled or disposed of as hazardous waste.
MAXIMUM INPUT:
Single 11KW Double 22KW (11KW each section)
MINIMUM ENTRY CLEARANCE:
Uncrated 25-1/5" (648mm)
SHIPPING INFORMATION:
Approx. Weight:
Single 540 lbs. (245 kg) Double 1020 lbs. (463 kg)
Crate sizes:
37-1/2" (952mm) x 43-1/2" (1105mm) x 46" (1168mm) (2 crates required for double)
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice.
P/N 38033 Rev A (6/04)
38-1/4
APPROVAL/STAMP
7-1/2 (MARK V-HD)
3 (MARK V-H)
25-1/2
17-1/16
36-7/8
27
15-3/8
Drill and tap ½-13 UNC-28 a minimum depth of ½”.
2-1/4
OUTLINE
OF OVEN
4-1/8
½” MINIMUM
27-15/16
4-1/8
4-1/8
26-3/4
7/8
7/8
WALL
4-1/8
SHIP’S
DECK LEG
59-1/4
33-3/4
8-3/4
7/8, TYP.
1-1/2, INSIDE TYP
5
8,
5
INSIDE
DIMENSIONS ARE IN INCHES
Loading...