Allowing yourself to be distracted by the TravelPilot RGN 08 can lead to a situation where you are
“driving blind”.
If you are not paying attention to the current traffic
situation around you, you could cause a serious accident.
Please consider the fact that at a speed of 50 km/h you
are travelling 14 m every second.
• Before starting off on your journey, make sure you
have familiarised yourself with the system.
• While you are driving, only use the voice output
and directional symbols on the monitor.
• Stop your vehicle at a suitable location if you wish
to re-program the TravelPilot RGN 08 or look up
more detailed information.
Route guidance
The current traffic routing situation can differ from
the data stored on the CD-ROM.
Due to system limitations, the TravelPilot RGN 08
cannot warn of altered traffic routing conditions e.g. due
to road construction measures. If you do not pay
attention to the actual traffic routing conditions, there is
a danger that you will cause a serious accident. Furthermore, you will be violating road traffic regulations.
• Please ensure that you take notice of signs relating
to the current traffic routing situation. As the driver,
you are solely responsible for traffic safety.
• Use the latest CD-ROM for the TravelPilot RGN 08
in order to avoid this problem as much as possible
right from the start. Ask your dealer for the latest
update.
2
Control and display elements for the TravelPilot RGN 08
69
5
4
3
7
8
2
1
1–Voice output volume control
2+Voice output volume control
3ONOn/off button
4Select character,
page through lists,
switch off voice output
5Select character,
page through lists
6Select character,
page through lists
10
11
12
7 AUX Switch to navigation
8Select character,
repeat voice output,
switch on voice output
9Header line
:Input field
;Selection field
< / Function keys
3
Area of use
The TravelPilot RGN 08 has been designed for use in
passenger cars.
The CD-ROM currently does not include any limitations
relating to lorries and buses such as height restrictions
or maximum permitted loads. If these are disregarded,
there is a danger that you will cause an accident.
Furthermore, you will be violating road traffic regulations.
• The TravelPilot RGN 08 can only be used, without
any limitations applying, in passenger cars.
Product information
The TravelPilot RGN 08 is an active guidance system for the
Bremen RCM 127 and New York RDM 127 car stereo
systems.
Using this system, you can let yourself be guided to your
required destination if a navigation CD has been inserted
that is valid for your present location and destination in
question.
CDs, such as the Merian Scout travel guide and other
country-specific CDs, are also available.
The guidance system provides audio-visual information.
You will be given precise information over the car stereo
loudspeakers with regard to such things as when and where
to take the next road turning.
The volume and tone of the voice output can be adjusted.
Directional symbols are used to convey information on the
car stereo display screen. Furthermore, the name of the
street that the vehicle is presently driving down is displayed
as well as the current distance to the destination and the
remaining time required to drive there. Prior to taking a
turning, the name of the road that is to be turned into is
displayed.
If you did not follow a suggested direction, a new route to the
destination will be calculated within a few seconds. So, for
instance, this means that you can by all means take a “secret
route around the houses” that you are familiar with even
though the TravelPilot has at the time given you other
directions.
The system knows where one-way streets, areas restricted
to traffic (e.g. pedestrian precincts, etc.) and no-left or noright turns are situated, and takes these into account when
calculating routes for passenger cars.
Delivery
TravelPilot RGN 08
The navigation system comprises a powerful computer with
CD-ROM drive, GPS receiver, GPS antenna and the latest
CD-ROM version.
4
Table of contents
Switching on navigation................................................ 6
Basic navigation menu ..................................................... 7
Entering the destination ................................................ 7
CD read error .................................................................41
5
Operating the system while driving
Allowing yourself to be distracted by the TravelPilot RGN 08 can
lead to a situation where you are “driving blind”.
If you are not paying attention to the current traffic situation around you,
you could cause a serious accident.
Please consider the fact that at a speed of 50 km/h you are travelling
14 m every second.
• Before starting off on your journey, make sure you have familiarised yourself with the system.
• While you are driving, only use the voice output and directional
symbols on the monitor.
• Stop your vehicle at a suitable location if you wish to re-program
the TravelPilot RGN 08 or look up more detailed information.
Switching on navigation
Press AUX with the car radio switched on. AUXILIARY MENU will appear on the screen with a list of the equipment connected.
Press the NAVI function key to display the last navigation page
used.
To access the main navigation menu, press the EXIT function key
as often as necessary.
S
AUXILIARY MENU
NAVI
EXIT
S
NAV MENU
PLEASE ENTER
DESTINATION
ENTER DEST.
EXIT
S
HILDESHEIM
KAISERSTRASSE
KENNEDYDAMM
INFO MENU
START NAVIGATION
NEW DESTINATION
6
Main navigation menu
The system will either prompt you to enter a destination or show the
destination selected last.
In the main navigation menu you can choose from the following options:
INFO MENU (if a destination has been entered)
START NAVIGATION (if a destination has been entered)
ENTER DEST. or NEW DESTINATION
S
NAV MENU
PLEASE ENTER
DESTINATION
ENTER DEST.
EXIT
Entering the destination
Press the ENTER DEST. or NEW DESTINATION function key.
A selection of the possible ways to enter a destination will appear on the
display:
MEMORY,
if the destination has been stored in the memory.
CITY,
if your destination is in a different city to the destination entered last.
STREET/JUNCTION,
if the destination is in the same city. This assumes that the destination
entered last contains a city name.
OTHER DEST.,
if you wish to select a city centre, a train station, a car park, an airport, a
petrol station, a motorway exit, a motorway junction or a motorway service area as your destination.
7
S
ENTER DEST.
MEMORY
CITY
STREET/JUNCTION
OTHER DEST.
EXIT
MEMORYAllows you to select your destination from
the memory. This assumes that you have
already stored at least one destination in
the memory.
Press MEMORY.
The destination memory menu will appear
on the screen.
Select FROM MEMORY to access the
memory and read the destinations stored
there.
Press the / rocker switch or the function keys next to the m/n arrows to page
through the display if there are more than
four destinations available.
Press the / rocker switch to move
the display vertically.
The arrows (m/n, w/v) on the right and at
the bottom indicate in which directions you
can page or move through the display.
Make your selection by pressing the
function key which corresponds to your
destination.
Then press START to activate the route
calculation and following that, the route
guidance.
Press EXIT to cancel your entry and
return to the main navigation menu. The
original destination will remain stored.
S
DEST. FROM MEMO
FROM MEMORY
SORT
SAVE POSITION
SAVE DESTINATION
DELETE EXIT
S
FROM MEMORY
BLAUPUNKT, HILDE
HILDESHEIM, KAIS
HILDESHEIM, RÖME
STUTTGART, KARLSn
v EXIT
S
DESTINATION
HILDESHEIM
KAISERSTRASSE
KENNEDYDAMM
START EXIT
8
CITYAllows you to enter the city in which your
destination is located.
If a city has already been entered, its name
will appear in place of CITY.
Press CITY.
The name of the city for the destination last
selected, if there is one, will appear in the
input line. A selection field containing letters and numbers will appear below it.
Enter the city name as follows:
Use the /, / rocker switch to
select the first letter (it will appear on a
highlighted background).
Press ENTER.
The input line will disappear from the display and the first letter will appear.
If you want to correct a letter, press
until the cursor moves to that letter. Select
the new letter by pressing /, /
and confirm your selection by pressing
ENTER.
In order to find the desired destination on
the list more quickly, you can enter two to
six characters, depending on how easily
identifiable the individual place name is.
After completing your entry, press to the
right or left of the input line.
A list from which you can select your destination will appear on the screen.
If the desired city name does not appear,
you can use the / rocker switch to
page through the list.
If the city/city district names are too long to
appear on the display, you can use the
/ rocker switch or the function keys
next to the m/n arrows to move through the
display from side to side.
The arrows (m/n, w/v) on the right and at
the bottom indicate in which directions you
can page or move through the display.
Select the destination city by pressing the
corresponding function key .
Note:
If the city selected is stored on the navigation CD more than once, another selection
list will appear on the screen.
After you have selected the city, the Enter
Dest. menu will remain on the screen. It will
indicate the name of the city selected.
S
SELECT CITY
HILDESHEIM m
HILDESHEIM NEUHO
HILDESHEIMER WAL
HILDFELD n
v EXIT
S
ENTER DEST.
MEMORY
HILDESHEIM
STREET/JUNCTION
OTHER DEST.
EXIT
10
STREET/JUNCTIONThis menu item will not appear unless the
streets in the city selected are included on
the digital map on the navigation CD.
Enter the street name and select the street
from the list as described previously in the
section on “CITY”.
After you have selected the street, it will
appear below the city.
To start navigation, all you have to do is
enter the city and street. If you enter a
junction as well, you can make your destination more precise. If this is not necessary, press START NAVIGATION to
activate the route calculation and following
that, route guidance.
ENTER JUNCTION
This menu item will display all of the streets
which cross or are connected with the
street selected.
Select the junction or connected street
which is closest to your destination by
pressing the corresponding function key .
Then you can activate the route calculation
and route guidance functions.
OTHER DEST.Allows you to select other, special destina-
tions stored on the navigation CD. This
might include city centres, train stations,
11
S
HILDESHEIM
KAISERSTRASSE
ENTER JUNCTION
START NAVIGATION
NAV MENU
S
SELECT JUNCTION
BISMARCKSTRASSE m
HANNOVERSCHE STR
KARDINAL-BERTRAM
KENNEDYDAMM n
v EXIT
S
ENTER DEST.
MEMORY
CITY
STREET/JUNCTION
OTHER DEST.
EXIT
airports, motorway exits/junctions/service
centres, petrol stations, car parks, border
crossings and garages.
If you select OTHER DEST. from the
Enter Dest. menu, you will see a menu with
a number of different menu items.
CENTREThis menu item will list all of the city dis-
tricts stored for the city selected.
S
OTHER DEST.
CENTRE
SURROUNDING DEST
NON-URBAN
TRAVEL GUIDE
EXIT
SURROUNDING DEST If you select SURROUNDING DEST,
you will see a menu with the following
menu items:
DESTINATION AREA
If you select this item, a list of special destinations located in the area of the destination activated last will appear.
POSITION AREA
If you select this item, a list of special destinations located in the area of your current
position will appear.
TOWN AREA
If you select this item, a list of special destinations located in the area of any town you
enter will appear. Enter the town as described in the section on “Entering the destination”.
12
S
SURROUNDING DEST
DESTINATION AREA
POSITION AREA
TOWN AREA
EXIT
S
DESTINATION AREA
RAILWAY STATION m
PETROL STATION
CAR PARK
CAR RENTAL n
v EXIT
After you have selected a special destination from one of these areas, the display
will show a list of destinations which can be
selected.
The lists for DESTINATION AREA and
POSITION AREA are sorted according to
distance and include information on the
distance and direction.
The lists for TOWN AREA are sorted alphabetically and do not include information on
the distance and direction at this point.
Press to move the display to the side
and reveal the information on the distance
and direction. If the distance exceeds 99
km, rrw will appear on the display.
NON-URBANUse this menu item to select destinations
outside the city limits, such as AIRPORT,
BORDER CROSS., M-JUNCTION,
MOTORWAY EXIT or MOTORWAYSERVICE.
After you have selected a non-urban destination, a selection field containing letters
and numbers will appear on the display.
If you know the name or the city in which
the desired destination is located, enter it
here as usual. This will take you to the desired destination on the list more quickly.
S
RAILWAY STATION
.4 HILDESHEIM HB
m
1nHILDESHEIM OS
6mHARSUM
7vBETTMAR
v EXIT
S
NON-URBAN
AIRPORT
BORDER CROSS.
M-JUNCTION
MOTORWAY EXIT n
EXIT
S
AIRPORT
ABCDEFGHIJKLMNOP
QRSTUVWXYZÄÖÜ
0123456789 -.
ENTER EXIT
13
Loading...
+ 29 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.