Blaupunkt BP 5.0 Instruction Manual

LS 162e

WiFi Car DVR

Instruction Manual

| 1

English

Names of Parts

Speaker

LCD Panel

Status Indicator

Tripod
Mount

Mic

microSD
Card Slot

Lens

GPS Receiver Slot

Power/Menu Button

Record / Emergency Button

Micro USB Port

Micro HDMI Port

2 |

English

Tripod Mount Strap Mount Strap

USB Cable Car Charger Car Mount

User Manual

Accessories

| 3

English

Shooting a Video

1. Power on:
Press

to turn on camcorder.

2. Record:
Press

to start recording.

Press

and then to stop.

Inserting a microSD Card

Before initial use, insert a microSD card.
(suggested at least 4GB, up to 64GB)

Getting Started

microSD
card

Charging the Unit

Fully charge camcorder for initial use by:

• Car charger

• PC USB port

• USB adapter

(not included)
During charging, screen shows battery icon or status indicator ashes in
orange

. When camcorder is fully charged, the indicator turns o.

4. Return to preview:
Switch to [

] to return.

5. Power o:
Press and hold

for 2 seconds.

3. Playback:

Press

to enter menu settings.

Select [Playback ].
Press [Play

] to play the video and press [Stop] to stop.

Note: When using a new microSD card,
foramt the card by your camcorder.

4 |

English

Camcorder Operation

In preview, press to enter menu settings

.

Menu Settings Descriptions

Play recorded videos

Switch between Action Cam and Dash Cam.

Enable/Disable WiFi for wireless connection

Enable/Disable internet cloud connection

Enable/Disable voice recording (Dash Cam only)

Auto REC

Enable/Disable

auto recording when car

engine starts (Dash Cam only)

60 SEC

OFF

Screen turns o after 60 seconds of non-

operation

(Dash Cam only)

Reset to factory default settings or format SD
card.

Screen Auto O

Settings

Voice Record

WiFi - Local

Auto Record

Dash Cam

Playback

Action Cam

WiFi - Cloud

Menu Settings

Camcorder has eight menu settings. Advanced settings can be set up
via mobile APP.

Button functions indicated above

.

Use

to navigate menu

settings.

Note: After 10 seconds of non-operation in menu settings, screen
returns to preview.

| 5

English

Mode Action Cam Dash Cam

Record type Normal Loop Emergency

Record trigger

Record
duration

Display info.

Transfer Files to PC:

1. Connect camcorder to PC via Micro USB cable.

2. Find video at "My computer\Removable Disk\".

3. Copy, move, delete, and playback videos on PC.

View Camcorder Screen on TV:

1. Connect camcorder to TV

via

Micro HDMI cable (not included).

2. Turn on camcorder.

3. Camcorder screen displays on TV simultaneously.

Camcorder has two recording modes for dierent applications:

Action Cam: Shoot normal videos.
Dash Cam: Shoot loop and emergency videos.

Record Modes

• Car impact

• Press

during

loop recording

P

ress in preview

Three min. sections

Unlimited

One min. section

(30 seconds before
and after the event)

Note:

1. During loop recording, oldest les are overwritten if microSD card is full.

2. During loop recording, press

to enable/disable mute fuction.

SD card remaining time Current date & time

2014/01/01 21:06:36

Comparison between modes:

00:06:36

Mobile Camcorder

Local

Mobile connects to camcorder directly via WiFi for remote control,
live view, album management and camcorder setup.

Mobile connects to cloud server to view live videos uploaded
from internet remote camcorder.

Wireless & APP Operation

Before inital using wirless connections, download and install APP

【

Blaupunkt Mobile DVR Control】 from Google Play Store and Apple Store.

【

Blaupunkt Mobile DVR Control】 has two functions:

(1) Local - Direct control (2) Internet - Internet live view

Blaupunkt Mobile

DVR Control

【

Local

】

(1)

Local

Internet

【

Internet

】

(2)

Internet

AP

Unieye

Server

AP

3G/4G Mobile Hotspot

3G/4G Mobile
Wireless Router

Wireless Router

Camcorder

AP

Mobile

Internet

6 | English

Mobile Connects to Camcorder

1. F

or Android: Turn on [Wi-Fi].

For iOS: Go to [Settings]

[Wi-Fi].

Turn on [Wi-Fi] and select the camcorder name.

2. Run 【Blaupunkt Mobile DVR Control

】

.

3.

Tap

【

Local

】

and select the camcorder to enter

【

Local

】

View Page.

Tap [ ] to scan again if camcorder is not found.

Note:

• Mobile cannot connect to camcorder while camcorder is recording.

• For rst use, password is not required. User can set camcorder

password in Setup Page.

【

Local

】

Function

iOS Settings

Local

Internet

Before using mobile APP's【Local】function, ensure camcorder WiFi
is on and camcorder Cloud setting is o. Once WiFi is ready, preview
shows camcorder name (R2-xxxxxxxx) for few seconds.

Local View PageLocal Main Page

| 7

English

8 |

English

Items Descriptions

Shoot videos and les are saved into camcorder microSD card

Shoot videos or Take photos and les are saved into
mobile "Album\Blaupunkt Mobile DVR Control

\"

For multiple camcorders user :

• Enable Quad-View for multiple live view on mobile

• In Quad-View, select

a window for single view.

Upside down image

Talk to camcorder from mobile

Groups Descriptions

Camcorder Settings

Edit name, password. Format SD card. Adjust
recording resolution, etc.

Internet Settings

Edit Email and AP and save in camcorder.
(For internet cloud server connection)

Car DVR Settings Set motion detector, impact sensor, etc.

View Page

Album Page

(for camcorder)

Setup Page (for camcorder)

4.【Local】function has three function pages: View, Album and Setup.

Folders Descriptions

View or delete video les recorded in action cam

View or delete video les recorded in dash cam

Note:

1.

In Setup Page, tap [Save] to complete settings to camcorder.

2.

Mobile media player may not support SuperHD video.

| 9

English

1. Go to [Setup] [ Internet Settings]
Edit Email and AP

2. Tap [Save] to complete Email & AP

settings.

Camcorder Internet Setup

Before using internet cloud service, Email and AP must be properly
set up.

Camcorder SD Card Setup

Go to [Setup] [ Camcorder Settings]

Adjust slide bar and press [Format]

button to complete SD card setup.

When SD card is rst-time use or reformatted in camcorder, user
should allocate memory for Action Cam and Dash Cam.

Note: AP(Access Point) can be

• Wireless Router or

• 3G/4G Mobile Wireless Router or

• 3G/4G Mobile Hotspot

AP

AP

AP

Wireless Router

AP

AP

3G/4G Mobile

Wireless Router

AP

3G/4G

Mobile Hotspot

10 |

English

Motion Detector Setup

G-Sensor Setup

When car's engine stops and motion is detected,
camcorder automatically records videos till no
motion is detected.

When camcorder is recording and any impacts happen, camcorder
automatically records emergency events if G-Sensor is set.

1. Set Camcorder to dash cam mode.

2. Go to APP

[Setup] [ Car DVR Settings]

Turn on [Motion Detector] Tap [Save].

Go to APP

[Setup] [ Car DVR Settings]

Select [G-Sensor], [H]/[L] Tap [Save].

Note : [H] High sensitivity. [L] Low sensitivity.

3. Camcorder shows

on screen.

4. When car's engine stops, operate camcorder

to active [ Motion Detector].

| 11

English

Camcorder Connects to Cloud Server

Enable [Cloud ] in camcorder to upload video streaming to
cloud server. Connecting status will be shown on screen.

【

Internet

】

Function

Internet

Status Descriptions

Connection successful. Preview shows [

] and

camcorder ID.

Login fail:

• Invalid AP name or password

• Weak WiFi signal or not in WiFi coverage

Connection fail:

• No internet or cloud server is not accessible

• Blocked by some rewall

Before using APP's【Internet】function, ensure camcorder internet
setup has been completed.

1. Connect mobile to internet (via WiFi, 3G/4G).

2. Run【Blaupunkt Mobile DVR Control】and
tap【Internet

】

.

3. For adding camcorder or using another
mobile, tap [

] Enter the camcorder ID

and password.

4. Tap camcorder ID/name to view internet live
videos.

【

Internet

】

Main Page

Remote Internet Live View

12 |

English

Situation Cause/Solution

Camcorder cannot
turn on

Power is low. Recharge battery

Camcorder is
frozen

Press and hold

button for 5 seconds to

force shutdown; press again to turn on

Camcorder cannot
record

•

No microSD card or microSD card is full

•

microSD card cannot be recognized

•

Format microSD card or replace microSD card

Camcorder cannot
connect to AP or
could server

• Invalid AP name or password

• Weak WiFi signal or not in WiFi coverage

• No internet or cloud server is not accessible

• Blocked by some rewall

Mobile cannot nd
camcorder

• Camcorder WiFi is disabled or not in WiFi
coverage

• Mobile WiFi is disabled

• iOS user does not choose camcorder name in

Wi-Fi Settings

• Tap [Refresh] button on [Blaupunkt Mobile

DVR Control]

Mobile cannot watch
live view

• Weak WiFi signal

• Camcorder is recording

• Camcorder is occupied by other mobile

Mobile cannot connect
to cloud server

Check mobile 3G/4G or WiFi internet
connection

Mobile cannot
watch live view

The internet bandwidth is insucient for
camcorder upload or mobile download

Forget camcorder
password

Enter camcorder menu settings and select
[Settings]

[Factory Reset] to set to default.

Troubleshooting

【

Internet

】

【

Internet

】

【

Local

】

【

Local

】

| 13

English

Insert GPS receiver into your device.

1. Connect camcorder to PC via standard Micro USB cable.
Note: The USB cable in accessory kit is only for power supply in car.
Please use other Micro USB cable for installation (ex. Android smart
phone's usb cable).

2. Find Setup.exe in "My computer\Removable Disk\DCIM".

3. Double click Setup.exe to install/

GPS Receiver

2. Install Software to Computer

marked on the map.

1. Google Maps View

• The Start

and End location of the video will be

Unieye Map

Operation

1. Hardware operation

1. Take out the SD card from your device, and put it into the card reader

2. Click “Unieye Map

” and run it on your computer.

3. An active Internet connection is required to use Google Maps View.

3. Software operation

of your computer.

14 |

English

2. Speed Meter

• Show the speed inforamtion from the
records of the video.

• Press to switch the scales of
meter in Kilometer per hour.

• Press to switch the scales of
meter in Mile per hour.

3. Compass

• Show the moving direction from the
records of the video.

4. Calendar

• Press : move to next month.

• Press : move to previous month.

• Press the date in the calendar, the taken videos show dates

information in the 24 hours meter.

• Click on color lines to view the video

.

The length of video clip 60 minutes 24 hours

• Press to select your SD card.
(Unieye Map only can read the video les in SD card )

• Press

to adjuest the volumn of your video.

• Press to forward/play/stop/backward your video.

| 15

English

5. PIP Mode

• In Windows mode, press to change view to Full Screen
mode.

• The defualt view of Full Screen mode : video in parent window,
map in child window.

• In Full Screen mode, press to switch view back to Windows
mode.

6. PIP Switch

• Press to switch map in parent window, video in child window.

• Press again to switch back.

Blaupunkt Technology GmbH
Robert-Bosch-Str. 200
D-31139 Hidesheìm
www.blaupunkt.com

Designed and Engineered by Blaupunkt

Manufactured in China / Fabríque en Chíne

E13