Bologna C51
Düsseldorf C51
Hawaii DJ51
Kansas DJ51
Maryland DJ51
Operating and installation instructions
Radio / Cassette
DEUTSCH
ENGLISH
2
4
1
3
6
5
798
10
11
1213141516
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
3
CONTROLS
1 button - unlatches the flip/
release panel
2Volume control
3Button - switches the radio and
mute function on/off
4RDS button - switches RDS con-
venience function on/off (radio
data system).
Selects variable radio texts.
5BND button (band), source se-
lection for radio mode,
selection of FM memory levels
and the wavebands MW and LW
(MW and LW are not available
on the Düsseldorf C51 and Kansas DJ51 units)
TS, starts the Travelstore function.
6Display (display field)
7
button - indicates the time on
the display
DIS, change display contents
Thank you for deciding in favour of a
Blaupunkt product. We wish you a g reat
deal of pleasure with your new car radio.
Before using your car radio, please read
these instructions carefully. The Blaupunkt editors are constantly working to
make our instruction manuals as clear
and easy to understand as possible.
Should you nonetheless have any questions about how to operate your new car
radio, please contact your specialist
dealer or call the telephone hotline for
your country , the number of which is given on the back page of this manual.
Road safety
Road safety has priority . Only operate your car radio if road and traffic conditions allow . F amiliarise yourself with the unit before setting off on
your journey.
You should always be able to hear
police, fire and ambulance sirens in
good time. For this reason, set the
volume of your car radio at a suitable level.
Installation
If you would like to install your car radio
yourself, please read the installation and
connection instructions at the end of the
manual.
Accessories
Please use only Blaupunkt-approved
accessories.
Remote controls
The most important functions can be
selected safely from the steering wheel
using the optional remote controls RC
08 and RC 10.
Amplifiers
All Blaupunkt amplifiers are suitable for
use with the radio.
CD changer
The following Blaupunkt CD changers
can be connected to the radio: CDC
A 06, CDC A 08, CDC A072 and IDC
A 09.
The CD changers CDC A 5 and CDC
A 071 can also be connected if you use
an adapter cable (Blaupunkt no.: 7 607
889 093).
The Blaupunkt CDC A08 CD changer
is included with the Kansas DJ51 and
the Maryland DJ51.
The Blaupunkt IDC A09 CD changer is
included with the Hawaii DJ51.
International telephone
information
Should you have any questions about
how to use the car radio or require any
further information, please call us!
The telephone information service numbers are printed on the last page of this
manual.
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
29
FLIP/RELEASE PANEL
Flip/release panel
Theft protection
Y our car radio is fitted with a flip/release
panel to guard against theft. Without this
panel, the unit is worthless to the thief.
Protect your unit from theft by taking the
flip/release panel with you every time
you leave the car . Do not leave the panel
behind in the car, e ven if it is out of sight.
The constructive design of the panel
makes for simple handling.
Note:
● Do not drop the flip/release panel.
● Do not expose the flip/release pan-
el to direct sunshine or other sources of heat.
● Keep the flip/release panel in the
case provided.
● Av oid direct skin contact with the
flip/release panel. Please clean it
when necessary with some white
spirit on a lint-free cloth.
Removing the flip/release panel
1
➮ Press the button 1.
This unlatches the flip/release panel.
➮ First pull the flip/release panel
straight and then to the left out of
the unit.
● After removing the flip/release pan-
el, the unit switches itself off.
● All the current settings are saved.
● If there is a CD in the unit, it re-
mains there.
Attaching the flip/release panel
➮ Slide the flip/release panel from left
to right into the unit guide.
➮ Press the left side of the panel into
the unit until it slots into place.
Note:
● Do not press against the display
while attaching the flip/release panel.
If the device was switched on when the
panel was removed, it will switch itself
back on automatically with the last settings (radio, Cassette, CD-changer or
AUX) as soon as the panel is replaced.
30
SWITCHING ON/OFF
Switching on/off
There are various ways of switching the
car radio on and off, as described below .
Switching on/off using the ignition
If the car radio is correctly connected to
the ignition and has not been switched
off using the button 3, it is switched
on/off simultaneously with the ignition.
You can also switch on your car radio
when the vehicle ignition is off.
➮ To do so, press the button 3.
Note:
● To protect the vehicle battery, the
unit switches off automatically after
one hour.
Switching on/off using the flip/
release panel
➮ Remove the flip/release panel.
The unit switches itself off.
➮ Replace the flip/release panel once
more.
The device switches on. The most recent setting (radio, Cassette, CD-changer or AUX) is restored.
Switching on/off using the button
3
➮ To switch the unit on, press the but-
ton 3.
➮ To switch the unit off, hold the but-
ton 3 down for more than two
seconds.
The car radio is now switched off.
Switching on by means of cassette
insertion
If there is no cassette in the deck when
the device is switched off,
➮ press the button, 9.
The flip-release panel opens.
➮ Insert the cassette with the open
side to the right gently into the
drive until you can sense some resistance.
The cassette is automatically drawn into
the drive.
As the cassette is drawn in, it must neither be held back nor assisted.
➮ Close the panel with gentle pres-
sure until you feel it engage.
The device switches on. Cassette play
starts.
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
31
VOLUME ADJUSTMENT
Volume adjustment
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
➮ To raise the system volume, turn
the volume control 2 to the right.
➮ To lower the system volume, turn
the volume control 2 to the left.
Setting the switch-on volume
You can set the volume at which you
wish the car radio to play when switched
on.
➮ Press the MENU button8.
➮ Press the
edly until “ON VOLUME” appears
on the display.
➮ Use the buttons : to set the
switch-on volume.
If you select the “0” setting, the volume
played before the unit was last switched
off will be reactivated.
Note:
● To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
when the unit was switched off, the
volume will be reset to “38” when
the unit is switched on again.
When you have finished making your
changes,
➮ press the MENU button 8 or OK
; twice.
or
button : repeat-
Mute setting
This feature enables you to lower the
system volume instantaneously (mute).
➮ Briefly press button 3.
“MUTE” appears on the display.
Activating the mute setting
The unit's mute level is adjustable.
➮ Press the MENU button 8.
➮ Press the
edly until “MUTE LEVEL” appears
on the display.
or
button : repeat-
➮ Use the buttons : to set the
mute level.
➮ When you have completed the set-
ting, press either the MENU button
8 or OK ; twice.
Telephone Audio/Navigation
Audio
If your car radio is connected to a mobile telephone or navigation system,
then when the telephone is taken “off
the hook”, or when the navigation system is speaking, the car radio is muted.
The telephone conversation or speech
output are reproduced via the car radio
speakers. This requires the mobile telephone or navigation system to be connected to the car radio as described
n the installation instruction
.Your Blaupunkt dealer can tell you whi
h navigation systems can be used wi
h your car radi
. If a traffic announcement is receiv
d during a telephone call, or while t
e navigation system is speaking, the tra-
32
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.