Black Widow BW RAS 130 User Manual
Standard Features
The System has the following standard features:
• (2) 4-button remote transmitters*
• Status indicator (LED)
• Program/Valet switch
• Remote Start capabilities
• Extended Range Receiver
• Multi-tone siren (120dB)
• Dual stage shock sensor
• Remote panic
• Valet mode
• Remote chirp mute
• Remote sensor bypass
• Passive or active arming
• Stop & Go Feature
• Auto Cold Start
• Flashing parking lights
• Auto Rearm
• Passive Arming
*
S-models provided with single transmitter
Optional Features
This System has many optional features that
may require additional parts and/or labor. Please
contact your dealer for more details.
• Remote keyless entry (Door lock/unlock)
• Illuminated entry
• Hood & trunk protection
• Horn honk
• Trunk/hatch release
• Window roll-up
• Back up battery
• Additional sensors
glass breakage
microwave
Note: Some features may not be appropriate
for certain vehicles. Automatic transmission
and electronic fuel injection are required. on
vehicles for use with this system.
REMOTE START/SECURITY SYSTEM
OWNERS MANUAL
1
REMOTE TRANSMITTER FUNCTIONS
Button 1 Arms the system and locks the
doors. Button 1 also activates the Panic
feature.
Button 2 Disarms the system and unlocks
the doors.
Button 3
Activates the optional Trunk
Release feature. Button 3 also Arms/Disarms
the system using the Temporary Chirp Delete
feature.
Button 4 Activates the Remote Start Feature.
Security System Operation
ARMING OPERATION
To arm the system press transmitter button 1:
• The siren will chirp once.
• The parking lights will flash once.
• The doors will lock*.
• The L.E.D. will turn solid for 2 seconds
then start flashing slowly. After 10
seconds the system is armed.
*
If installed
While the system is armed the alarm will
trigger if:
• A door is opened.
• The hood/trunk is opened.
• The shock sensor detects an impact to
the vehicle.
• The brake pedal is pressed.
When the alarm is triggered the siren will
sound, the parking lights will flash, and the
horn will honk (optional). If the alarm is
triggered while the remote start is engaged,
the remote start will immediately shut down.
PASSIVE ARMING
The passive arming feature allows the system
to arm automatically without any user
intervention.
This feature must be programmed
during installation.
To arm the system passively:
1. Turn ignition key off and open the door.
• The LED will start flashing rapidly to
indicate that the system is preparing to
arm.The system can be armed at any
time by pressing transmitter button 1.
2. Close all doors.
• The siren will chirp 30 seconds after
the last door is closed to indicate the
system is now armed*.
• The doors will lock**.
*
As an option, the passive arming chirps can be
eliminated during programming.
** If Passive Locking is programmed during installation.
DISARMING OPERATION
To disarm the system press transmitter
button 2.
• The siren will chirp twice.*
• The parking lights will flash twice.
• The doors will unlock.
• The optional illuminated entry feature
will turn on the dome light for 30 seconds.
*
If the alarm was triggered while away, the system will
respond with 3 chirps and 3 parking light flashes.
2
Button 1
Button 3
Button 2LED
Button 4
Loading...