Biostar AM1MH, AM1MD, AM1ML Quick Start Manual

AM1MH / AM1MD / AM1ML

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents
here and specially disclaims any implied warranties of merchantability or fitness
for any purpose. Further the vendor reserves the right to revise this publication
and to make changes to the contents here without obligation to notify any party
beforehand.

Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we
will not be responsible for any mistakes found in this user’s manual. All the brand
and product names are trademarks of their respective companies.

Dichiarazione di conformità
sintetica

Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002

Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive

2004/108/CE, 2006/95/CE e
1999/05/CE

quando ad esso applicabili

Short Declaration of conformity

We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives

2004/108/CE, 2006/95/CE and
1999/05/CE

whenever these laws may be applied

Table of Contents

Chapter 1: Introduction.......................................... 1

1.1 Before You Start ................................................................................1

1.2 Package Checklist ............................................................................1

1.3 Motherboard Specifications.............................................................2

1.4 Rear Panel Connectors....................................................................3

1.5 Motherboard Layout..........................................................................4

Chapter 2: Hardware Installation ........................... 5

2.1 Install Central Processing Unit (AM1 Socket)............................... 5

2.2 Install a Heatsink...............................................................................6

2.3 Connect Cooling Fans...................................................................... 6

2.4 Install System Memory.....................................................................8

2.5 Expansion Slots.................................................................................9

2.6 Jumper Setting ................................................................................10

2.7 Headers & Connectors...................................................................11

Chapter 3: UEFI BIOS & Software ........................ 15

3.1 UEFI BIOS Setup............................................................................15

3.2 BIOS Update.................................................................................... 15

3.3 Software............................................................................................19

Chapter 4: Useful Help ......................................... 22

4.1 Driver Installation.............................................................................22

4.2 Extra Information.............................................................................23

4.2 AMI BIOS Beep Code.....................................................................24

4.3 Troubleshooting...............................................................................24

Appendix: SPEC In Other Languages .................... 25

Arabic.....................................................................................................................25

French ...................................................................................................................26

German .................................................................................................................27

Italian ..................................................................................................................... 28

Japanese...............................................................................................................29

Polish.....................................................................................................................30

Portuguese ...........................................................................................................31

Russian .................................................................................................................32

Spanish.................................................................................................................. 33

AM1MH / AM1MD / AM1ML

1

CHAPTER 1: INTRODUCTION

1.1 Before You Start

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with sufficient

lighting.

 Always disconnect the computer from power outlet before

operation.

 Before you take the motherboard out from anti-static bag,

ground yourself properly by touching any safely grounded
appliance, or use grounded wrist strap to remove the static
charge.

 Avoid touching the components on motherboard or the rear

side of the board unless necessary. Hold the board on the
edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the case after

installation. Loose parts will cause short circuits which may
damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

 The operating temperatures of the computer should be 0 to

45 degrees Celsius.

 To avoid injury, be careful of:

Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit

1.2 Package Checklist

; Serial ATA Cable x2
; Rear I/O Panel for ATX Case x1
; Installation Guide x1
; Fully Setup Driver DVD x1

Note: The package contents may be different due to the sales region or models in which it was sold.
For more information about the standard package in your region, please contact your dealer or sales
representative.

Motherboard Manual

2

1.3 Motherboard Specifications

Specifications

CPU Support

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket
* Please refer to www.biostar.com.tw for CPU support list.

Memory

Supports Single Channel DDR3 1333/ 1600 (*DDR3 1600 depends on CPU)
2 x DDR3 DIMM Memory Slot, Max. Supports up to 16 GB Memory
Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 module
* Please refer to www.biostar.com.tw

for Memory support list.

Storage 2x SATA 6Gb/s Connector, Supports Native IDE, AHCI Mode

LAN

AM1MH / AM1MD:
Realtek RTL 8111G, 10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex
capability
AM1ML:
Realtek RTL 8106E, 10/ 100 Mb/s auto negotiation, Half / Full duplex
capability

Audio Codec ALC662, 5.1 Channels, High Definition Audio

USB

2x USB 3.0 port (2 on rear I/Os)
6x USB 2.0 port (2 on rear I/Os and 4 via internal headers)

Expansion Slots

1x PCIe 2.0 x16 Slot (x4)
1x PCIe 2.0 x1 Slot

Rear I/Os

1x PS/2 Mouse
1x PS/2 Keyboard
1x HDMI Port (AM1MH)
1x DVI-D (AM1MD)
1x VGA Port
1x LAN port
2x USB 2.0 Port
2x USB 3.0 Port
3x Audio Jack

Internal I/Os

2x SATA 6.0Gb/s Connector
2x USB 2.0 Header (each header supports 2 USB 2.0 ports)
1x 4-Pin Power Connector
1x 24-Pin Power Connector
1x CPU Fan Connector
1x System Fan Connector
1x Front Panel Header
1x Front Audio Header
1x Clear CMOS Header
1x Printer Port Header
1x Serial Port Header

Form Factor Micro-ATX Form Factor, 191 mm x 170 mm

OS Support

Windows XP / 7 / 8 / 8.1
Biostar reserves the right to add or remove support for any OS with or without
notice.

AM1MH / AM1MD / AM1ML

3

1.4 Rear Panel Connectors

AM1MH

AM1MD

AM1ML

Note 1: Since the audio chip supports High Definition Audio Specification, the function of

each audio jack can be defined by software. The input / output function of each audio jack
listed above represents the default setting. However, when connecting external microphone
to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.

Note 2: Maximum resolution:

HDMI: 1920 x 1080 @60Hz
DVI-D: 1920 x 1200 @60Hz
VGA: 1920 x 1200 @60Hz

Motherboard Manual

4

1.5 Motherboard Layout

Note: ■ represents the 1st pin.

AM1MH / AM1MD / AM1ML

5

CHAPTER 2: HARDWARE INSTALLATION

2.1 Install Central Processing Unit (AM1 Socket)

Step 1: Locate the CPU socket on the motherboard

Step 2: Pull the socket locking out from the socket and then raise the lever up to

a 90-degree angel.

Step 3: Look for the triangular cut edge on socket, and the golden dot on CPU

should point forwards this triangular cut edge. The CPU will fit only in the
correct orientation.

Motherboard Manual

6

Step 4: Hold the CPU down firmly, and then close the lever to locked the position

2.2 Install a Heatsink

The CPU might equip with two different types of heatsink. For proper installation,
please kindly refer to the installation manual of your heatsink.

Note: Do not forget to connect the CPU fan connector.

AM1MH / AM1MD / AM1ML

7

2.3 Connect Cooling Fans

These fan headers support cooling-fans built in the computer. The fan cable and
connector may be different according to the fan manufacturer. Connect the fan
cable to the connector while matching the black wire to pin#1.

CPU_FAN: CPU Fan Header

Pin Assignment

1 Ground
2 Voltage Fan
3 FAN RPM rate sense
4 Smart Fan Control (By Fan)

SYS_FAN: System Fan Header

Pin Assignment

1 Ground
2 +12V
3 FAN RPM rate sense

Note: CPU_FAN, SYS_FAN support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.

Motherboard Manual

8

2.4 Install System Memory

A. DDR3 Modules

Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM

on the slot such that the notch on the DIMM matches the break on the slot.

Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips

snap back in place and the DIMM is properly seated.

Note1: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

B. Memory Capacity

DIMM Socket Location

DDR3 Module

Total Memory Size

DDR3_A1 512MB/1GB/2GB/4GB/8GB
DDR3_A2 512MB/1GB/2GB/4GB/8GB

Max is 16GB.

AM1MH / AM1MD / AM1ML

9

2.5 Expansion Slots

PEX16_1: PCI-Express Gen2 x4 Slot

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 2GB/s per direction; 4GB/s in total.

PEX1_1: PCI-Express Gen2 x1 Slot

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total

Install an Expansion Card

You can install your expansion card by following steps:

1. Read the related expansion card's instruction document before
install the expansion card into the computer.

2. Remove your computer's chassis cover, screws and slot bracket
from the computer.

3. Place a card in the expansion slot and press down on the card until it
is completely seated in the slot.

4. Secure the card’s metal bracket to the chassis back panel with a
screw.

5. Replace your computer's chassis cover.

6. Power on the computer, if necessary, change BIOS settings for the
expansion card.

7. Install related driver for the expansion card.

Motherboard Manual

10

2.6 Jumper Setting

The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is “close”, if not, that means the jumper is “open”.

Pin opened Pin closed Pin1-2 closed

JCMOS: Clear CMOS Header

Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

31

Pin 1-2 Close:

Normal Operation (default).

31

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Load Optimal Defaults and save settings in CMOS.

AM1MH / AM1MD / AM1ML

11

2.7 Headers & Connectors

ATXPWR1: ATX Power Source Connector

For better compatibility, we recommend to use a standard ATX 24-pin power
supply for this connector. Make sure to find the correct orientation before
plugging the connector.

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

ATXPWR2: ATX Power Source Connector

This connector will provide +12V to CPU power circuit.

Pin Assignment

1 +12V
2 +12V
3 Ground
4 Ground

Note1: Before you power on the system, please make sure that both ATXPWR1 and
ATXPWR2 connectors have been plugged-in.

Note2: Insufficient power supplied to the system may result in instability or the peripherals
not functioning properly. Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices.

Motherboard Manual

12

PANEL: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
2 N/A 10 N/A

N/A

3 N/A 11 N/A N/A
4 Speaker

Speaker

Connector

12 Power LED (+)
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)

Hard drive LED

14 Power LED (-)

Power LED

7 Ground 15 Power button
8 Reset control

Reset button

16 Ground

Power-on button

SATA1~SATA2: Serial ATA 6.0 Gb/s Connectors

These connectors connect to SATA hard disk drives via SATA cables and with
transfer rate upto 6 Gb/s.

Pin Assignment

1 Ground
2 TX+
3 TX­4 Ground
5 RX­6 RX+
7 Ground

AM1MH / AM1MD / AM1ML

13

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with a wide range of simultaneously accessible
external Plug and Play peripherals.

Pin Assignment

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground
8 Ground
9 Key
10 NC

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel. This header supports HD and AC’97 audio front panel connector.

HD Audio AC’97

Pin Assignment Pin Assignment

1 Mic Left in 1 Mic In
2 Ground 2 Ground
3 Mic Right in 3 Mic Power
4 GPIO 4 Audio Power
5 Right line in 5 RT Line Out
6 Jack Sense 6 RT Line Out
7 Front Sense 7 Reserved
8 Key 8 Key
9 Left line in 9 LFT Line Out

10 Jack Sense 10 LFT Line Out

Note1: It is recommended that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high definition audio capability.
Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an AC'97 front
audio output cable. The function can be found via O.S. Audio Utility.

Motherboard Manual

14

COM: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin Assignment

1 Carrier detect
2 Received data
3 Transmitted data
4 Data terminal ready
5Signal ground
6 Data set read

y

7 Request to send
8 Clear to send
9 Ring indicator

10 Key

PRINT: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy

9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key

AM1MH / AM1MD / AM1ML

15

CHAPTER 3: UEFI BIOS & SOFTWARE

3.1 UEFI BIOS Setup

z The BIOS Setup program can be used to view and change the BIOS

settings for the computer. The BIOS Setup program is accessed by pressing
the <DEL> key after the Power-On Self-Test (POST) memory test begins
and before the operating system boot begins.

z For further information of setting up the UEFI BIOS, please refer to the UEFI

BIOS Manual in the Setup DVD.

3.2 BIOS Update

The BIOS can be updated using either of the following utilities:

z BIOSTAR BIOS Flasher: Using this utility, the BIOS can be updated from a

file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a
CD-ROM.

z BIOSTAR BIOS Update Utility: It enables automated updating while in the

Windows environment. Using this utility, the BIOS can be updated from a file
on a hard disk, a USB drive (a flash drive or a USB hard drive), or a
CD-ROM, or from the file location on the Web.

BIOSTAR BIOS Flasher

BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple
way to update your BIOS via USB pen drive.

Note1: This utility only allows storage device with FAT32/16 format and single partition.
Note2: Shutting down or resetting the system while updating the BIOS will lead to system boot

failure.

Updating BIOS with BIOSTAR BIOS Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, copy and save the BIOS file into a USB flash (pen) drive.

3. Insert the USB pen drive that contains the BIOS file to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST screen,
the BIOS-FLASHER utility pops
out. Choose [fs0] to search for the
BIOS file.

Motherboard Manual

16

6. Select the proper BIOS file, and a

message asking if you are sure to
flash the BIOS file. Click Yes to
start updating BIOS.

7. A dialog pops out after BIOS flash

is completed, asking you to restart
the system. Press the [Y] key to
restart system.

8. While the system boots up and the full screen logo shows up, press <DEL> key to
enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

BIOS Update Utility (through the Internet)

1. Installing BIOS Update Utility from the DVD Driver.

2. Please make sure the system is connected to the internet before using this
function.

3. Launch BIOS Update Utility and
click the Online Update button on
the main screen.

AM1MH / AM1MD / AM1ML

17

4. An open dialog will show up to
request your agreement to start the
BIOS update. Click Yes to start the
online update procedure.

5. If there is a new BIOS version, the
utility will ask you to download it.
Click Yes to proceed.

6. After the download is completed,
you will be asked to program
(update) the BIOS or not. Click Yes
to proceed.

7. After the updating process is
finished, you will be asked you to
reboot the system. Click OK to
reboot.

8. While the system boots up and the full screen logo shows up, press <DEL> key
to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

BIOS Update Utility (through a BIOS file)

1. Installing BIOS Update Utility from the DVD Driver.

2. Download the proper BIOS from http://www.biostar.com.tw/

3. Launch BIOS Update Utility and

click the Update BIOS button on
the main screen.

Motherboard Manual

18

4. A warning message will show up
to request your agreement to start
the BIOS update. Click OK to start
the update procedure.

5. Choose the location for your BIOS
file in the system. Please select
the proper BIOS file, and then
click on Open. It will take several
minutes, please be patient.

6. After the BIOS Update process is
finished, click on OK to reboot the
system.

7. While the system boots up and the full screen logo shows up, press <DEL> key
to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

Backup BIOS

Click the Backup BIOS button on
the main screen for the backup of
BIOS, and select a proper location
for your backup BIOS file in the
system, and click Save.

AM1MH / AM1MD / AM1ML

19

3.3 Software

Installing Software

1. Insert the Setup DVD to the optical drive. The driver installation program would
appear if the Auto-run function has been enabled.

2. Select Software Installation, and then click on the respective software title.

3. Follow the on-screen instructions to complete the installation.

Launching Software

After the installation process is completed, you will see the software icon showing on
the desktop. Double-click the icon to launch it.

Note1: All the information and content about following software are subject to be changed without
notice. For better performance, the software is being continuously updated.

Note2: The information and pictures described below are for your reference only. The actual
information and settings on board may be slightly different from this manual.

BIOScreen Utility

This utility allows you to personalize your boot logo easily. You can choose BMP as
your boot logo so as to customize your computer.

Please follow the step-by-step instructions below to update boot logo:

z Load Image：Choose the picture as the boot logo.
z Transform：Transform the picture for BIOS and preview the result.
z Update Bios：Write the picture to BIOS Memory to complete the update.

Motherboard Manual

20

eHot-Line

eHot-Line is a convenient utility that helps you to contact with our Tech-Support system.
This utility will collect the system information which is useful for analyzing the problem you
may have encountered, and then send these information to our tech-support department
to help you fix the problem.

Note: Before you use this utility, please set Outlook Express as your default e-mail client
application program.

This block will show
the information which
wou ld be co llec ted in
the mail.

Pro vide t he e-ma il
address that you would
like to send the copy to.

Pro vide t he nam e of
the power supply
manufacturer and the
model no.

Send the mail out.

Save these infor mati on to a .txt file

Exit this dialog.

Select your area or
the area close to you.

*

Pro vide t he name of
the memory module
manufactur er.

*

Describe condition
of your system.

*

*

repr esents important
in forma tion t hat yo u
must provide. Without
this information, you may
not be able to send out
the mail.

After filling up this information, click
“Send” to send the mail out. A
warning dialog would appear asking
for your confirmation; click “Send” to
confirm or “Do Not Send” to cancel.

If you want to save this information to
a .txt file, click “Save As…” and then
you will see a saving dialog appears
asking you to enter file name.

AM1MH / AM1MD / AM1ML

21

Enter the file name and then click
“Save”. Your system information will be
saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.

Note1: We will not share customer’s data with any other third parties, so please feel free to provide
your system information while using eHot-Line service.

Note2: If you are not using Outlook Express as your default e-mail client application, you may need
to save the system information to a .txt file and send the file to our tech support with other e-mail
application. Go to the following website http://www.biostar.com.tw/app/en/about/contact.php for
getting our contact information.

Motherboard Manual

22

CHAPTER 4: USEFUL HELP

4.1 Driver Installation

After you installed your operating system, please insert the Fully Setup Driver
DVD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.

Note: If this window didn’t show up after you insert the Driver DVD, please use file browser
to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the
compatible driver for your motherboard and operating system. Click on each
device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list
the software available for your system, click on each software title to launch the
installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver DVD.
Click on the Manual icon to browse for available manual.

Note: You will need Acrobat Reader to open the manual file. Please download the latest
version of Acrobat Reader software from http://get.adobe.com/reader/

AM1MH / AM1MD / AM1ML

23

4.2 Extra Information

CPU Overheated

If the system shutdown automatically after power on system for seconds, that
means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to
avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

Motherboard Manual

24

4.2 AMI BIOS Beep Code

Boot Block Beep Codes

Number of Beeps Description

Continuing Memory sizing error or Memory module not found

POST BIOS Beep Codes

Number of Beeps Description

1 Success booting.
8 Display memory error (system video adapter)

4.3 Troubleshooting

Probable Solution

1. There is no power in the system. Power
LED does not shine; the fan of the
power supply does not work

2. Indicator light on keyboard does not
shine.

1. Make sure power cable is securely
plugged in.

2. Replace cable.

3. Contact technical support.

System is inoperative. Keyboard lights are
on, power indicator lights are lit, and hard
drives are running.

Using even pressure on both ends of the
DIMM, press down firmly until the module
snaps into place.

System does not boot from a hard disk drive,
but can be booted from optical drive.

1. Check cable running from disk to disk
controller board. Make sure both ends
are securely plugged in; check the
drive type in the standard CMOS
setup.

2. Backing up the hard drive is
extremely important. All hard disks
are capable of breaking down at any
time.

System only boots from an optical drive.
Hard disks can be read, applications can be
used, but system fails to boot from a hard
disk.

1. Back up data and applications files.

2. Reformat the hard drive. Re-install
applications and data using backup
disks.

Screen message shows “Invalid
Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure
correct information is in setup.

System cannot boot after user installs a
second hard drive.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility with
other drives.

AM1MH / AM1MD / AM1ML

25

APPENDIX: SPEC IN OTHER LANGUAGES

Arabic

تﺎﻔﺻاﻮﻤﻟا

ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ةﺪﻋﺎﻗ

ﺔﻳﺰآﺮﻤﻟا

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket

*ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳwww.biostar.com.tw ﺞﻟﺎﻌﻤﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ CPU.

ةﺮآاﺬﻟا

ةﺎﻨﻗ ةﺪﺣاو ﻢﻋﺪﺗو DDR3 1333/ 1600

2xيد .يد .را .DDR3 ﺔﺟودﺰﻤﻟا ةﺮآاﺬﻟا تﺎﺤﺘﻓ DIMMﺘﺗ ، ﻰﺼﻗأ ﺪﺤآ ﻞﻤﺤ16ةﺮآاذ ﺖﻳﺎﺑﺎﺠﻴﺟ

ﺔﺟودﺰﻣ ﺔﺤﺘﻓ ﻞآ DIMM نود ﻞﻤﺤﺘﺗ ECC 512 ﺖﻳﺎﺑ ﺎﺠﻴﻣ /1/2/4/8يد ﺖﻳﺎﺑﺎﺠﻴﺟ .يد . راDDR3

*ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳwww.biostar.com.tw ةﺮآاﺬﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ .

ﻦﻳﺰﺨﺘﻟا

ﺔﻠﺻو 2 x ﺎﺗﺎﺳ SATA 6 ﺖﻳﺎﺑ ﺎﺠﻴﺟ /ﺔﻴﻧﺎﺜﻟا

ﻷا ﺪﻳار ﻞﻤﺤﺘﺗ مIDE / AHCI

ﺔﻴﻠﺤﻣ ﺔﻜﺒﺷLAN

: AM1MH / AM1MD ل تر ﻚﻴﺘﻟﺎﻴﻳرRTL 8111G REALTEK

10 / 100 / 1000 ﺖﻳﺎﺑﺎﺠﻴﻣ / ﻒﺼﻨﻟا ، ﻲﺋﺎﻘﻠﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا /ﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪﻘﻟا

: AM1ML ل تر ﻚﻴﺘﻟﺎﻴﻳرRTL 8106E REALTEK

10 / 100 ﺖﻳﺎﺑﺎﺠﻴﻣ / ﻒﺼﻨﻟا ، ﻲﺋﺎﻘﻠﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا /ﻘﻟاﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪ

ﻲﺗﻮﺼﻟا ﺰﻴﻣﺮﺘﻟا

ALC662

5.1ﺔﻗﺪﻟا ﺔﻴﻟﺎﻋ تاﻮﻨﻗ
مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ

USB

ﺬﻓﺎﻨﻣ 2 x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ USB 3.0 ) 2ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ (
ﺬﻓﺎﻨﻣ 6 x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ USB 2.0 ) 2 و ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ 4ﻮﻤﻟا لﻼﺧ ﻦﻣ ﻲﻠﺧاﺪﻟا عز(

ﻊﺳﻮﺘﻟا تﺎﺤﺘﻓ

1 x ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ PCIe 2.0x 16)x4(
1 x ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ PCIe 2.0x 1

جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا

ﺔﻴﻔﻠﺨﻟا

1 x PS/2ةرﺎﻔﻟا
1 x PS/2ﺮﺗﻮﻴﺒﻤﻜﻠﻟ ﺢﻴﺗﺎﻔﻤﻟا ﺔﺣﻮﻟ

دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x HDMIحﻮﺿﻮﻟا ﻲﻟﺎﻌﻟا دﺪﻌﺘﻣ ﻂﻴﺳو (AM1MH)

دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x ﺔﻴﻤﻗر ﺔﻴﺋﺮﻣ ﺔﻬﺟاو DVI-D (AM1MD)
دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x ﻲﺋﺮﻤﻟا ضﺮﻌﻟا ﺔﻣﻮﻈﻨﻣ VGA

دﺪﻋ ﻞﻴﺻﻮﺘﻟ ﺔﺤﺘﻓ1 x ﺔﻴﻠﺤﻤﻟا ﺔﻜﺒﺸﻟا LAN

دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ2 x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ USB 2.0
دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ2 xﻧ مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎUSB 3.0
دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ3 xتﻮﺼﻠﻟ كﺎﺟ

جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا

ﺔﻴﻠﺧاﺪﻟا

ﺔﻠﺻو2 x SATA 6 ﺖﻳﺎﺑﺎﺠﻴﺟ /ﺔﻴﻧﺎﺜﻟا
عزﻮﻣ2x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ USB 2.0 ) مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ ﻦﻴﺘﺤﺘﻓ ﻞﻤﺤﺘﻳ عزﻮﻣ ﻞآUSB 2.0(

ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو1 x 4ﺲﻴﺑﺎﺑد

ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو1x 24د سﻮﺑ

ﺔﻠﺻو1 x ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺪﻳﺮﺒﺗ ﺔﺣوﺮﻣ

ﺔﻠﺻو1x ﺔﻣﻮﻈﻨﻤﻟا ﺪﻳﺮﺒﺗ حواﺮﻣ

عزﻮﻣ1 xﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا
عزﻮﻣ1x ﻲﻣﺎﻣﻷا تﻮﺼﻟا
عزﻮﻣ1x ﺮﺷﺎﺒﻣ سﻮﻤﻴﺳ
عزﻮﻣ1x ﺔﻌﺑﺎﻄﻠﻟ ﺔﺤﺘﻓ
عزﻮﻣ1x ﺔﻴﻠﺴﻠﺴﺗ ﺔﺤﺘﻓ

ﻞﻜﺸﻟا ﻞﻣﺎﻋ ﺔﻣﺪﻘﺘﻤﻟا ﺎﻴﺟﻮﻟﻮﻨﻜﺘﻟا دﺪﻣ ﻞﻜﺷ ﻞﻣﺎﻋMicro-ATX ، 191 ﻢﻣ x 170 ﻢﻣ

ﺔﻣﻮﻋﺪﻤﻟا ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻧأ

ﻲﺑ ﺲآإ زوﺪﻨﻳوwindows xp/ زوﺪﻨﻳو7 8.1 / 8 /

رﺎﺘﺳﻮﻴﺑBIOSTARرﺎﻈﻧأ نوﺪﺑ وأ ﻊﻣ ﻞﻴﻐﺸﺗ مﺎﻈﻧ يﻷ ﻢﻋﺪﻟا ﺔﻟزأ وأ ﺔﻓﺎﺿإ ﻖﺤﺑ ﻆﻔﺘﺤﺗ .

Motherboard Manual

26

French

Spécifications

Support Unité
Centrale

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket
* Veuillez vous reporter à www.biostar.com.tw pour la liste des supports modèles d'Unité
Centrale.

Mémoire

Supporte mémoire DDR3 single canal 1333/ 1600
Banc de mémoire 2 x DDR3 DIMM, Supporte max. jusqu’à une mémoire de 16 GB
Chaque module DIMM supporte module DDR3 non-ECC 512MB/ 1/ 2/ 4/ 8 GB
* Veuillez vous reporter à www.biostar.com.tw pour la liste des soutien de la mémoire.

Stockage Connecteur 2 x SATA 6Gb/s, Supporte système indigène IDE & AHCI mode

Réseau local

AM1MH / AM1MD: Realtek RTL 8111G
10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat / bidirectionnelle
simultanée
AM1ML: Realtek RTL 8106E
10/ 100 Mb/s auto négociation, capacité bidirectionnelle à l'alternat / bidirectionnelle
simultanée

Codec audio ALC662, Canaux 5.1, écoute audio de haute définition

USB

Port 2x USB 3.0 (2 sur les I/O arrières)
Port 6x USB 2.0 (2 sur les I/O arrières et 4 en interne)

Connecteur
d’extension

1x PCIe 2.0 x16 Fente (x4)
1x PCIe 2.0 x1

I/O arrirèes

1x PS/2 Clavier
1x PS/2 Souris
1x Port HDMI (AM1MH)
1x Port DVI-D (AM1MD)
1x Port VGA
1x port LAN
2x Port USB 2.0
2x Port USB 3.0
3x entrées audio

I/O en interne

2x Connecteur SATA 6.0Gb/s
2x embases USB 2.0 (chaque embase supporte 2 Ports USB 2.0)
1x 4-Broche de carte
1x 24-Broche de carte
1x Connecteur ventilateur unité centrale
1x Connecteur ventilateur système
1x Fiche panneau avant
1x Fiche audio avant
1x Fiche mémoire CMOS vide
1x Embase port imprimante

1x Embase port série
Facteur
d'encombrement

Facteur d'encombrement Micro-ATX, 191 mm x 170 mm

Support SE

Windows XP / 7 / 8 / 8.1

Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou sans

préavis.

AM1MH / AM1MD / AM1ML

27

German

Spezifikationen

CPU-Unterstützun
g

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket
* Bitte konsultieren Sie

www.biostar.com.tw für CPU-Unterstützungsliste

Festplattenspeich
er

Unterstützt single-channel DDR3 1333/ 1600
2 x DDR3 DIMM-SpeicherSlot, Max. Uterstützung bis zu 16 GB-Speicher
Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3-Module
* Bitte konsultieren Sie www.biostar.com.tw für für Speicherunterstützung

Liste.

Arbeitsspeicher 2x SATA 6Gb-Verbindung, Unterstützt Ureinwohner IDE & AHCI Modus

LAN

AM1MH / AM1MD: Realtek RTL 8111G
10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig
AM1ML: Realtek RTL 8106E
10/ 100 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig

Audio-Codec ALC662, 5.1 Kanäle, HD-Audio

USB

2x USB 3.0-Port (2 hintere I/Os)
6x USB 2.0-Port (2 hintere I/Os und 4 via interne Header)

Erweiterungsansc
hlüsse

1x PCIe 2.0 x16-Slot (x4)
1x PCIe 2.0 x1

Hintere I/Os

1x PS/2-Maus
1x PS/2-Keyboard
1x HDMI-Port (AM1MH)
1x DVI-D-Port (AM1MD)
1x VGA-Port
1x LAN-Port
2x USB 2.0-Port
2x USB 3.0-Port
3x Audio Jack

Interne I/Os

2x SATA 6.0Gb/s-Verbinung
2x USB 2.0-Header (jeder Header unterstützt 2 USB 2.0-Ports)
1x 4-Pin-Stromverbindung
1x 24-Pin-Stromverbindung
1x CPU-Ventilatorverbindung
1x System-Ventilatorverbindung
1x Header für Frontpanel
1x Header für Frontaudio
1x Header für klares CMOS
1x Header für Druckerport
1x Serieller Port-Header

Formfaktor Micro-ATX Formfaktor, 191 mm x 170 mm

OS-Unterstützung

Windows XP / 7 / 8 / 8.1
Biostar reserves the right to add or remove support for any OS with or without

notice.

Motherboard Manual

28

Italian

Specificazioni

Supporto
processore

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket

* Si prega di consultare www.biostar.com.tw per la lista di supporto del
processore

Memoria

Supporta DDR3 1333/ 1600 Singolo Canale
2 x DDR3 DIMM Slot di Memoria Supporta fino a 16 GB Memoria
Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 moduli
* Si prega di consultare www.biostar.com.tw per la lista di supporto del memoria.

Memorizzazione

Connettore 2x SATA 6Gb/s
Supporta nativo IDE & AHCI modo

Catena

AM1MH / AM1MD: Realtek RTL 8111G
10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo
AM1ML: Realtek RTL 8106E
10/ 100 Mb auto negoziazione, capacita di duplex Meta / Completo

Codec Audio

ALC662
Canali Audio di Alta Definizione 5.1

USB

Slot 2x USB 3.0 (2 nei ingressi/ uscite posteriore)
Slot 6x USB 2.0 (2 nei ingressi/ uscite posteriore e 4 da distributori interni)

Slot di
espansione

Slot 1x PCIe 2.0 x16 (x4)
Slot 1x PCIe 2.0 x1

Ingressi/ Uscite
Posteriore

Mouse 1x PS/2
Tastiera 1x PS/2
Slot 1x HDMI (AM1MH)
Slot 1xDVI-D (AM1MD)
Slot 1x VGA
Slot 1x LAN
Slot 2x USB 2.0
Slot 2x USB 3.0
Jack audio 3x

Ingressi/ Uscite
Interni

Connettore 2x SATA 6.0Gb/s
Distributore 2x USB 2.0(ogni distributore supporta 2 slot USB 2.0)
Connettore con 4 pin x1
Connettore con 24 pin x1
Connettore Ventilatore processore x1
Connettore Ventilatore Sistema x1
Distributore Pannello Frontale x1
Distributore Audio Frontale x1
Distributore CMOS Diretto x1
Distributore Slot Stampante x1

Fattore di Forma Fattore di Forma Micro-ATX, 191 mm x 170 mm

Supporto SO

Windows XP / 7 / 8 / 8.1
Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi SO

con o senza preavviso.

AM1MH / AM1MD / AM1ML

29

Japanese

仕様

CPU サポート

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket

*CPU サポート リストについては、www.biostar.com.twを参照してください。

メモリ

シングルチャンネル DDR3 1333/ 1600 をサポート

2 x DDR3 DIMM メモリ スロット、 最大 16GB メモリまでサポート

各 DIMM は、 非-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 モジュールをサポートしています

*サポートされているメモリのリストについては、www.biostar.com.twを参照してください。
保存スペース 2x SATA 6Gb/s コネクタ, ネイティブ IDE & AHCI モード のサポート

LAN

AM1MH / AM1MD: Realtek RTL 8111G

10/ 100/ 1000 Mb/s オートネゴーシエーション、半/全 二重通信

AM1ML: Realtek RTL 8106E

10/ 100 Mb/s オートネゴーシエーション、半/全 二重通信

オーディオ コーデッ
ク

ALC662

5.1 チャンネル, ハイ デフィニション オーディオ

USB

2x USB 3.0 ポート (後部 I/O に2つ)

6x USB 2.0 ポート (後部 I/O に2つ 及び 内蔵ヘッダー経由に4つ)

拡張スロット

1x PCIe 2.0 x16 スロット (x4)

1x PCIe 2.0 x1

後部 I/O

1x PS/2 キーボード

1x PS/2 マウス

1x HDMI ポート(AM1MH)

1x DVI-D ポート(AM1MD)

1x VGA ポート

1x LAN ポート

2x USB 2.0 ポート

2x USB 3.0 ポート

3x オーディオ ジャック

内蔵 I/O

2x SATA 6.0Gb/s コネクタ

2x USB 2.0 ヘッダー (各ヘッダーは、2つの USB 2.0 ポートをサポートしています)

1x 4-Pin パワー コネクタ

1x 24-Pin パワー コネクタ

1x CPU ファン コネクタ

1x システム ファン コネクタ

1x フロント パネル ヘッダー

1x フロント オーディオ ヘッダー

1x クリア CMOS ヘッダー

1x プリンター ポート ヘッダー

1x シリアル ポート ヘッダー

フォーム ファクタ Micro-ATX フォーム ファクタ、191 mm x 170 mm

サポート OS

Windows XP / 7 / 8 / 8.1

Biostar には、通知なしでサポート OS を変更する権限があります。

Motherboard Manual

30

Polish

Specyfikacje techniczne

Obsługa procesora

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket
* Proszę sprawdzić listę obsługiwanych procesorów na stronie internetowej
www.biostar.com.tw

Pamięć

Pojedynczy pamięci DDR3 1333/ 1600 Dwukanałowa
2 x DDR3 DIMM Pamięć Gniazda procesora (Slot), Maksymalna wielkość pamięci 16 GB
Każdy DIMM obsługuje jeden moduł non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3
* Proszę sprawdzić listę obsługiwanych pamięć na stronie internetowej
www.biostar.com.tw

Przechowywanie Złącze 2x SATA 6Gb/s, Obsługa rodzimy IDE & AHCI tryb

LAN

AM1MH / AM1MD: Układ RTL 8111G
10/ 100/ 1000 Mb auto negocjacja, pojemność dupleks Połowe / Pełny
AM1ML: Układ RTL 8106E
10/ 100 Mb auto negocjacja, pojemność dupleks Połowe / Pełny

Codec Audio

ALC662
Kanały Audio wysokiej Definicji 5.1

USB

2 x złącza USB 3.0 (2 przez tylne porty wejścia/ wyjścia oraz)
6 x złącza USB 2.0 (2 przez tylne porty wejścia/ wyjścia oraz 4 przez wewnętrzne porty)

Złącza rozszerzeń

złącza 1x PCIe 2.0 x16 (x4 Slot)
złącza 1x PCIe 2.0 x1

Tylne porty wejścia/
wyjścia

Myszka 1x PS/2
Klawiatura 1x PS/2
Port 1x HDMI (gniazdo) (AM1MH)
Port 1x DVI-D (AM1MD)
Port 1x VGA
Port 1x LAN
Porty 2x USB 2.0
Porty 2x USB 3.0
Porty audio 3x

Wewnętrzne porty
wejścia/ wyjścia

Złącza 2x SATA 6.0Gb/s
Złącza 2x USB 2.0 (każde złącze obsługuje dodatkowe 2 porty USB 2.0)
Złącza 4 pionowe x 1
Złącza 24 pionowe x 1
Złącze wentylatora CPU x 1
Złącze wentylatora obudowy x 1
Złącze przedniego panelu x1
Złącze audio przedniego panelu x1
Złącze bezpośrednie CMOS x1
Złącze port drukarki x1
Port szeregowy x1

Obudowa Obudowa Micro-ATX, 191 mm x 170 mm

Obsługa OS

Windows XP / 7 / 8 / 8.1
Biostar zastrzega sobie prawo do dodania lub wycofania obsługi dla OS, z
wypowiedzeniem lub bez wypowiedzenia.

AM1MH / AM1MD / AM1ML

31

Portuguese

Especificações

Suporte
Processador

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket
* Por favor consulte

www.biostar.com.tw para obter uma lista de suporte do processador.

Memória

Suporta DDR3 1333/ 1600 Canal único
2 x DDR3 DIMM Slot de memória Suporta até 16 GB Memória
Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 módulo
* Por favor consulte

www.biostar.com.tw para obter uma lista de suporte do memória.

Armazenamento Conector 2x SATA 6Gb/s, Suporta nativo IDE & AHCI modo

LAN

AM1MH / AM1MD: Realtek RTL 8111G
10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio
AM1ML: Realtek RTL 8106E
10/ 100 Mb auto negociação, capacidade duplex Metade / Cheio

Codec de Audio

ALC662
Canais de Áudio de Alta Definição 5.1

USB

Porta 2x USB 3.0 (2 nas entradas/saídas traseiras)
Porta 6x USB 2.0 (2 nas entradas/saídas traseiras e 4 pelos Dispositivos internos)

Slots de expansão

Porta 1x PCIe 2.0 x16 (x4)
Porta 1x PCIe 2.0 x1

Entradas/Saídas
no painel traseiro

Mouse 1x PS/2
Teclado 1x PS/2
Porta 1x HDMI (AM1MH)
Porta 1x DVI-D (AM1MD)
Porta 1x VGA
Porta 1x LAN
Porta 2x USB 2.0
Porta 2x USB 3.0
Soquete audio 3x

Conectores na
placa

Conector 2x SATA 6.0Gb/s
Dispositivo 2x USB 2.0 (cada Dispositivo suporta 2 portas USB 2.0)
Conector de 4 pinos x1
Conector de 24 pinos x1
Conector de Ventoinha processador x1
Conector de Ventoinha Sistema x1
Dispositivo Painel Frontal x1
Dispositivo de Audio Frontal x1
Dispositivo CMOS Direct x1
Dispositivo Porta Impressora x1
Dispositivo Porta Série x1

Fator de Fôrma Fator de Fôrma Micro-ATX, 191 mm x 170 mm

Suporte OS

Windows XP / 7 / 8 / 8.1
Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS com ou

sem notificação.

Motherboard Manual

32

Russian

Спецификации

Поддержка
центрального
процессора

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket

* Перечень поддержки центрального процессора смотрите на www.biostar.com.tw

Память

Поддерживает Одноканальный DDR3 1333/ 1600

2 гнезда платы памяти DDR3 DIMM, максимальная память до 16 Гб

Каждый модуль DIMM поддерживает модуль не-ECC 512 Мб/ 1/ 2/ 4/ 8 Гб DDR3

* Перечень поддержки памяти смотрите на www.biostar.com.tw.
Накопитель Соединитель 2x SATA 6 Гб/с, Поддерживает родной IDE & AHCI режим

Локальная сеть

AM1MH / AM1MD: Realtek RTL 8111G

Автосогласование 10/ 100/ 1000 Мб/с, работает в полно/полудуплексном режиме

AM1ML: Realtek RTL 8106E

Автосогласование 10/ 100 Мб/с, работает в полно/полудуплексном режиме

Аудиокодек

ALC662

Каналы 5.1, высококачественное аудио

USB

2 порта USB 3.0 (2 сзади ввода-вывода)

6 порта USB 2.0 (2 сзади ввода-вывода и 4 через внутренние контакты)

Гнезда расшир.

1x PCIe 2.0 x16 гнездо (x4)

1x PCIe 2.0 x1

Задняя плата
ввода-вывода

1 мышь PS/2

1 клавиатура PS/2

1 порт HDMI (AM1MH)

1 порт DVI-D (AM1MD)

1 порт VGA

1 порт локальной сети

2 порта USB 2.0

2 порта USB 3.0

3 гнезд для подключения наушников

Внутр. Плата
ввода-вывода

Соединитель 2x SATA 6 Гб/с

2 контакта USB 2.0 (каждый контакт поддерживает 2 порта USB 2.0)

1 4-выводный разъем питания

1 24-выводный разъем питания

1 разъем вентилятора ЦП

1 разъема вентилятора системы

1 контакт передней панели

1 контакт передней аудиопанели

1 контакт микросхемы Clear CMOS

1 контакт порта принтера

1 контакт последовательного порта

Конструктив Форм-фактор Micro-ATX, 191 мм x 170 мм

Поддержка ОС

Windows XP / 7 / 8 / 8.1

Biostar оставляет за собой право добавлять или удалять поддержку любой ОС, с

уведомлением или без.

AM1MH / AM1MD / AM1ML

33

Spanish

Especificaciones

Compatibilidad
con el procesador

AMD "Kabini" Athlon/Sempron APUs, AM1 Socket
*Por favor consultar con

www.biostar.com.tw para la lista de compatibilidad con el

procesador.

Memoria

Soporta DDR3 1333/ 1600 monocanal
2x DDR3 DIMM Ranura de memoria Soporta hasta 16 GB Memoria
Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3
*Por favor consultar con

www.biostar.com.tw para la lista de compatibilidad con el

memoria.
Almacenamiento
de información

Conector 2x SATA 6Gb/s, Soporta nativo IDE & AHCI modo

LAN

AM1MH / AM1MD: Realtek RTL 8111G

10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo

AM1ML: Realtek RTL 8106E

10/ 100 Mb/s auto negociación, capacidad dúplex Mitad/Completo
Códec Audio ALC662, Canales Audio de Alta Definición 5.1

USB

Ranura 2x USB 3.0 (2 en las entrada/salidas posteriores)

Ranura 6x USB 2.0 (2 en las entradas/salidas posteriores y 4 por los distribuidores

internos)
Ranuras de
Extinción

Ranura 1x PCIe 2.0 x16 (x4)

Ranura 1x PCIe 2.0 x1

Panel trasero de
E/S

Ratón 1x PS/2

Teclado 1x PS/2

Ranura 1x HDMI (AM1MH)

Ranura 1x DVI-D (AM1MD)

Ranura 1x VGA

Ranura 1x LAN

Ranura 2x USB 2.0

Ranura 2x USB 3.0

Socket audio 3x

Conectores en
placa

Conector 2x SATA 6Gb’s

Distribuidor 2x USB 2.0 (cada distribuidor soporta 2 ranuras USB 2.0)

Conector con 4 patillas x1

Conector con 24 patillas x1

Conector Ventilador procesador x1

Conector Ventilador Sistema x1

Distribuidor Panel Frontal x1

Distribuidor Audio Frontal x1

Distribuidor CMOS Directo x1

Distribuidor Ranura Impresora x1

Distribuidor Ranura Serie x1
Factor de Forma Factor de Forma Micro-ATX, 191 mm x 170 mm

Soporte OS

Windows XP / 7 / 8 / 8.1

Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin

notificación.

2014/01/02