Universal VPN router with LTE(4G), WLAN 11n and VDSL2
bintec RS353jwv-4G
WLAN- 802.11n, 2,4 and 5 GHz
Mulitband LTE Modem (Compatible to HSPA+, UMTS, GSM)
VDSL2 / ADSL2+ / ISDN Modem- (Annex B/J)
5x Gigabit-Ethernet
5x IPSec-tunnels (optional 30 tunnels), HW acceleration
IPv6 Support
Flexible mounting: Desktop or 19”- Rack
bintec RS353jwv-4G
The bintec RS353jwv-4G with integated LTE(4G), WIFI (802.11n) and VDSL2/ADSL2+ Modem (Annex B/J) is, thanks to
high-speed LTE(4G) capability, especially well-suited for scenarios where high availability and redundancy are
indispensable.
Product Description
The bintec RS353jwv-4G is a powerful professional VPN router for high-speed internet access. With its combination VDSL2
and ADSL2+ modem, this model gives small and mid-sized companies the foundation they need to establish state-of-the-
art, robust internet connectivity. What`s more, the integrated LTE (4G) modem also ensures high availability and
redundancy for the company`s IT infrastructure and the integrated 802.11n wireless module also provides wireless data
connectivity for enterprise applications.
The RS353jwv-4G delivers advanced security, flexibility for a wide range of application scenarios, and exceptional
performance. The combination VDSL2 and ADSL2+ modem supports both the Annex B (ADSL over ISDN, used primarily
in Germany) ADSL standard as well as Annex J all digital mode ADSL without a splitter. It is also compatible with the
popular ”all IP” service of Deutsche Telekom. The integrated LTE(4G) modem supports LTE at speeds of up to 100 Mbps
for downloads and up to 50 Mbps for uploads in addition to UMTS (3G+) and HSPA+. The state-of-the-art dual-band
wireless module which operates at 2.4 and 5 GHz supports all current wireless standards including 802.11 a/b/g/n. The
MIMO 2x2 technology allows for maximum raw data rates of up to 300 Mbps.
This router boasts a fan-less metal housing, offers long-term reliability for business-critical applications, and makes an
ideal access router for small and mid-sized enterprises (SMEs), branch locations, and home offices.
Thanks to the included 19” rackmount conversion bracket, customers can easily integrate this model into 19” server racks
or operate it on the desktop. Rack mounting is further simplified by the device height of exactly one rack unit and the
integrated power supply. The SIM card access is conveniently located on the bottom of the device.
In addition to the VDSL2 /ADSL2+ modem, the bintec RS353jwv-4G also provides five Gigabit Ethernet ports which can be
independently configured for use in a LAN, WAN, or DMZ. Both the device`s included ISDN port and its integrated LTE
(4G) modem can be used for remote configuration access or backup internet access. The included five licenses for
hardware-accelerated IPSec tunnels provide comprehensive high-speed VPN functionality and allow for secure connections
to branch locations and off-site employees. A USB console port allows access to basic router features in critical
environments.
With its wide range of WAN connectivity options, the RS353jwv-4G raises the bar for flexibility among access routers. An
optional external indoor or outdoor LTE(4G) antenna enhances reception in challenging conditions.
Smart Design
The fan-free metal housing is a proven, rugged design that has set bintec devices apart from the competition for years.
The integrated power supply and 19” conversion bracket now also make it easy to install in a 19” rack. SIM card access is
conveniently located on the bottom of the device.
Maximum Performance
The bintec RS353jwv-4G router is based on a powerful platform that provides unrivaled capabilities. Customers with VDSL2
connections can double their data transfer rates by taking advantage of VDSL vectoring. Heavy local network traffic can
also be handled easily thanks to high speed bintec interfaces. You can establish links between separate global locations
over secure, encrypted VPN tunnels.
Airtight security
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
The bintec RS353jwv-4G not only delivers outstanding performance, it also provides a comprehensive range of security
features. With five simultaneous IPSec channels available, you can establish secure links between branch locations,
subsidiaries, and home offices. The integrated IPSec implementation in bintec routers allows the use of pre-shared keys
as well as digital certificates as recommended by Germany`s Federal Office for Information Security. This lets you use a
public key infrastructure and ensures maximum security. An object-oriented stateful inspection firewall offers packet
filtering to provide additional protection against attacks.
Professional management
A graphical user interface is the primary means of configuring the router. This fast, web-based interface makes it easy to
set up routers using the integrated configuration wizard. Administrators can also manage the devices locally or remotely
using configurable telnet, SSH, ISDN login, or GSM dial-in. The bintec DIME Manager is a free software tool that allows
administrators to manage up to 50 devices at once.
Ready for the future
Businesses can easily integrate the bintec RS353jwv-4G into existing company networks. This bintec router also allows for
a gradual migration to the new IPv6 internet protocol. The integrated VDSL2-modem of the bintec RS353jwv-4G supports
VDSL bandplan 998 including profiles 8b and 17a, the standard used in Germany and most other European countries. The
modem also supports automatic failover to ADSL2+. With easy migration from ADSL2+ to VDSL2 and support for VDSL
vectoring, the professional-grade bintec RS353jwv-4G router is a sound investment in your organization`s future.
WLAN Controller, HotSpot and adult content filtering
The router also includes all the functionality of the bintec WLAN Controller. The bintec WLAN controller lets you configure
and monitor small- and mid-sized WLAN networks with up to 12 access points. No matter whether you need frequency
management with automatic channel selection, loadbalancing across several access points, support for virtual LANs, or
virtual wireless network administration (multi-SSID) - you have all these advanced features at your fingertips with the
WLAN Controller. The software continually monitors the entire wireless network, notifying administrators of any
malfunctions or security threats.
The router`s integrated HotSpot Gateway together is an ideal complement to the WLAN Controller in combination with a
bintec HotSpot license, allowing operators to set up a wireless guest network that requires authentication. This secure
separation between the guest network and company network is configured through the WLAN Controller and implemented
using virtual wireless networks. An additional highlight is the optional bintec elmeg webfilter which can be used to prevent
children and youth from accessing inappropriate content.
Features
Quality of Service (QoS)
Layer2/3 tagging
Conversion of 802.1p layer 2 priorisation information to layer
3 diffserv attributes
TCP Download Rate Control For reservation of bandwidth for VoIP connections
DiffServ
Priority Queuing of packets on the basis of the
DiffServ/TOS field
Policy based Traffic Shapping Dynamic bandwidth management via IP traffic shaping
Bandwidth reservation
Dynamic reservation of bandwidth, allocation of guaranteed
and maximum bandwidths
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
Warranty
2 year manufacturer warranty inclusive advanced
replacement
Software Update
Free-of-charge software updates for system software
(BOSS) and management software (DIME Manager)
Redundancy / Loadbalancing
Load Balancing
Static and dynamic load balancing to several WAN
connections on IP layer
BRRP
Optional: Bintec Router Redundancy Protocol for backup of
several passive or active devices with free selectable
priority
BoD
Bandwidth on Demand: dynamic bandwidth to suit data
traffic load
VPN backup
Simple VPN backup via different media. Additional enables
the bintec elmeg interface based VPN concept the
application of routing protocols for VPN connections.
Content of Delivery
WLAN antenna Two external 3 dBi dipol dualband antennas
LTE/UMTS antenna 2 x LTE/UMTS 2dBi quad-band omni-directional antenna
Power cable
Power cable with connector according to IEC-60320-C5/C6,
length 1.8m, 3-pole
ISDN (BRI/S0) cable ISDN (BRI/S0) cable, 2m
Safety Instructions Safety Instructions
VDSL/ADSL cable VDSL/ADSL cable (RJ45-RJ45), 3m
Installation Poster Guide for the Installation
19" brackets and screws Two 19" brackets for the switch panel mounting
Ethernet cable 1 Ethernet cable, 2m
Layer 2 Functionality
VLAN
Support of up to 256 VLAN (Virtual LAN) for segmentation
of the network in independent virtual segments (workgroups)
Proxy ARP
Enables the router to answer ARP requests for hosts, which
are accessible via the router. That enables the remote
clients to use an IP address from the local net.
Bridging
Support of layer 2 bridging with the possibility of separation
of network segment via the configuration of bridge groups
Logging / Monitoring / Reporting
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
WLAN Monitoring
Display for each link: MAC address, IP address, TX
packets, RX packets, signal strength for all receiver
antennas, signal-to-noise ratio, data rate; output via web-
based configuration user interface (http/https)
Internal system logging
Syslog storage in RAM, display via web-based configuration
user interface (http/https), filter for subsystem, level,
message
External system logging
Syslog, several syslog server with different syslog level
configurable
E-Mail alert Automatic E-Mail alert by definable events
SNMP traps SNMP traps (v1, v2, v3) configurable
IPSec monitoring
Display of IPSec tunnel and IPSec statistic; output via web-
based configuration user interface (http/https)
Interfaces monitoring
Statistic information of all pysical and logical interfaces
(ETH0, ETH1, SSIDx, ...), output via web-based
configuration user interface (http/https)
ISDN monitoring
Display of active and past ISDN connections; output via
web-based configuration user interface (http/https)
IP accounting
Detailed IP accounting, source, destination, port, interface
and packet/bytes counter, transmission also via syslog
protocol to syslog server
ISDN accounting
Detailed ongoing recording of ISDN connection parameter
like calling number and charging information, transmission
also via syslog protocol to syslog server
RADIUS accounting
RADIUS accounting for PPP, PPTP, PPPoE and ISDN
dialup connections
Keep Alive Monitoring Control of hosts/connections via ICMP polling
Tracing
Traces can be stored in PCAP format, so that import to
different open source trace tools (e.g. wireshark) is
possible.
Administration / Management
RADIUS
Central check of access authorization at one or several
RADIUS server, RADIUS (PPP, IPSec inclusive X-Auth and
login authentication)
RADIUS dialout
On a RADIUS server configured PPP und IPSec connection
can be loaded into the gateway (RADIUS dialout).
TACACS+
Support of TACACS+ server for login authentication and for
shell comando authorization
Time synchronization
The device system time can be obtained via ISDN and from
a SNTP server (up to 3 time server configurable). The
obtained time can also be transmitted per SNTP to SNTP
clients.
Automatic Time Settings
Time zone profiles are configurable. That enables an
automatic change from summer to winter time.
Supported management systems DIME Manager, XAdmin
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
Configurable scheduler
Configuring of time and event controlled tasks, e.g. reboot
device, activate/deactivate interface, activate/deactivate
WLAN, trigger SW update and configuration backup
Configuration Interface (FCI)
Integrated web server for web-based configuration via HTTP
or HTTPS (supporting self created certificates). This user
interface is by most of bintec elmeg GmbH products
identical.
Software update
Software updates are free of charge; update via local files,
HTTP, TFTP or via direct access to the bintec elmeg web
server
Remote maintenance
Remote maintenance via telnet, SSL, SSH, HTTP, HTTPS
and SNMP (V1,V2,V3)
ISDN remote maintenance
Remote maintenance via ISDN dial-in with checking of the
calling number. The ISDN remote maintenance connection
between two bintec elmeg devices can be encrypted.
GSM remote maintenance
Remote maintenance via GSM login (external USB UMTS
(3G) modem required)
Device discovery function Device discovery via SNMP multicast.
On The Fly configuration No reboot after reconfiguration required
SNMP
SNMP (v1, v2, v3), USM model, VACM views, SNMP traps
(v1, v2, v3) configurable, SNMP IP access list configurable
SNMP configuration
Complete management with MIB-II, MIB 802.11, Enterprise
MIB
Configuration export and import
Load and save configurations, optional encrypted; optional
automatic control via scheduler
SSH login
Supports SSH V1.5 and SSH V2.0 for secure connections
of terminal applications
HP OpenView Integration into Network Node Manager
XAdmin
Support of XAdmin roll out and configuration managemant
tool for larger router installations (IP+ISDN+GSM)
Configuration via USB Configuration interface is available
Interfaces
External WLAN antenna connectors
Two external RSMA antenna connectors IEEE
802.11a/b/g/n; 1 radio module, Mimo 2x2 für 2.4 und 5 GHz
band
External LTE-UMTS antenna connectors
Two SMA antenna connectors for external LTE-UMTS
antenna
Ethernet
5 x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing,
Auto MDI/MDI-X, up to 4 ports can be switches as
additional WAN ports incl. load balancing, all Ethernet ports
can be configured as LAN or WAN.
USB 2.0 host
USB 2.0 full speed host port for connecting LTE(4G) or
UMTS(3G) USB sticks (supported sticks: see www.bintec-
elmeg.com)
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
USB-Console
Service-Interface USB 2.0 plug B (driver: see www.bintec-
elmeg.com)
VDSL2/ADSL 2+/ADSL
ADSL over ISDN (compatible to U-R2 connection of
Deutsche Telekom)
ISDN Basic Rate (BRI) 1 x BRI (TE), 2 B channels
Hardware
Realtime clock System time persists even at power failure for some hours.
Wall mounting Integrated in housing
Desktop operation Possible, rubber pad included the package
Environment
Temperature range: Operational 0°C to 40°C; storage -
25°C to 70°C; Max. rel. humidity 10 - 95% (non
condensing)
Protection Class IP20
Power supply
Internal power supply 110-240V, AC 50/60Hz, 0.7A, with
energy-efficient switching controller
Power consumption (idling) Less than 5 Watt
Housing
Metal case, opening for Kensington lock, prepared for wall
mounting
Dimension Ca. 265 mm x 40 mm x 170 mm (W x H x D)
Fan Fanless design therefor high MTBF
Reset button Restart or reset to factory state possible
Status LEDs
Power, Status, 10 * Ethernet, VDSL, ISDN, WLAN, USB,
LTE
Function Button Supported from Release 9.1.10
Standards and certifications
EN 55022; EN 55024 + EN 55024/A1; EN61000-3-2; EN
61000-3-3; EN 61000-4-4; EN 60950-1; EN 300 328; EN 301
489-17; EN 301 489-1; EN 301 893
Hardware - modular expansions
IP address ISDN B/D channel license
Free of charge license for IP address transmission in ISDN
D or B channel for IPSec connections; registering under
www.bintec-elmeg.com required.
LTE(4G) / UMTS(3G)
Supported standards
Support of LTE 4G (download rate up to 100 Mbps, upload
rate up to to 50 Mbps), UMTS 3.5G (HSPA+), GPRS, Edge
and GSM
UMTS (3.5G) / EDGE - GPRS (2G) bands 850/900/1800/1900/2100 MHz
LTE(4G) bands 800/900/1800/2100/2600 MHz
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
IPv6
IPv4/ IPv6 Dual Stack Parallel mode IPv4/ IPv6 supported
DHCPv6 DHCP Server and Client
NDP
Neighbor Discovery Protocol: Router Discovery, Prefix
Discovery, Parameter Discovery, Address Resolution,
Static configuration of neighbors, IPv6 Router
AAdvertisment Option for DNS Configuration (trough ND)
ULA Unique Local IPv6 Unicast Addresses
IPv6 Adressing
IPv6 Stateless address auto-configuration (SLAAC), Manual
address configuration, General-prefix support for address
configuraion (user and prefix delegation DHCPv6), Duplicate
Address Detection
ICMPv6 (router & host)
Destination Unreachable, Packet too big, Time exceeded,
Echo Request
Routing Protocols Static Routes
Multicast Multicast for IPv6
Firewall Firewall via IPv6
IPSec IPSec for IPv6
DSL
VDSL VDSL2 ITU G.993.2
VDSL Profile VDSL Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
VDSL Compatibel to VDSL2 connection of Deutsche Telekom
VDSL Vectoring VDSL2 Vectoring ITU G.993.5
VDSL Compatible to ADSL/ADSL2/ADSL2+ over ISDN, Annex B
ADSL
ADSL over ISDN (ITU G.992.1 Annex B, ISDN - compatible
to U-R2 connection of Deutsche Telekom, G.Lite (ITU
G.922.2)
ADSL Support of Dying Gasp
ATM Support of layer 1 protocol AAL5, PVCs, RFC 1483
ATM Support of up to 7 virtual channels (VC)
ATM Support of OAM F4/F5 line monitoring
ATM
Support of ATM traffic management (COS - CBR, VBR,
UBR)
Wireless LAN
WLAN standards 802.11n (Mimo 2x2); 802.11b; 802.11g; 802.11a; 802.11h
WLAN
1Modes 2,4 GHz Operation: 802.11b only; 802.11g only,
802.11b/g/n mixed; 802.11b/g/n mixed long; 802.11b/g/b
mixed short; 802.11b/g/n ; 802.11g/n; 802.11n only; 5 GHz
Operation: 802.11a only; 802.11a/n; 802.11n
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
Data rate for 802.11n (2,4 / 5GHz)
MCS0-15 enables physical rates up to 150 Mbps at 20 MHz
channels bandwidth, 2 streams, short guard interval; MCS0-
15 enables physical data rates up to 300 Mbps at 40 MHz
channels bandwidth, 2 streams, short guard interval
Data rates for 802.11a,h (5 GHz) 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Data rates for 802.11b,g (2.4 GHz)
11, 5.5, 2 und 1 Mbps (DSSS modulation); 54, 48, 36, 24,
18, 12, 9 and 6 Mbps (OFDM modulation)
Bandwidth (802.11n)
20/40 MHz (bundling of two adjoining 20 MHz channels to
one 40 MHz channel)
Frequency bands 2.4 GHz indoor/outdoor (EU)
2.4 GHz Indoor/Outdoor (2412-2472 MHz) max. 100 mW
EiRP. The permitted transmission power may vary in
countries outside the EC.
Frequency bands 5 GHz outdoor (EU)
5 GHz outdoor (5470-5725 MHz) max. 200 mW EiRP
allowed (Germany). The permitted transmission power may
vary in other countries.
Frequency bands 5 GHz indoor (EU)
5 GHz indoor (5150-5350 MHz) max. 200 mW EiRP allowed
(Germany). The permitted transmission power may vary in
other countries.
Multi-SSID
Depending on the complexity of configuration up to 16
service sets per radio module, with virtual access points
and own MAC address per SSID
Broadcast SSID On/off switchable
Automatic Rate Selection (ARS) Automatic usage of the optimized data rate
WLAN operation WLAN Accesspoint operation
RTS/CTS RTS/CTS threshold adjustable
Short guard interval (802.11n)
On/off switchable; increase of throughput by reduction of
the guard intervals from 800ns to 400ns
Number of spatial streams (802.11n) 1 or 2
Extended Performance Feature
Beamforming, MRC (Maximum Ratio Combining), Block-
Acknowlegde
WLAN Electric Characteristics
TX power @ 2,4 GHz Max. 20dBm
TX power @ 5 GHz Max. 17dBm
Receiver Sensitivity @ 2.4 GHz 802.11n 20 MHz
MCS0 -95 dBm; MCS1 -94 dBm; MCS2 -92 dBm; MCS3 -88
dBm; MCS4 -85 dBm; MCS5 -81 dBm; MCS6 -80 dBm;
MCS7 -78dBm; MCS8 -95 dBm; MCS9 -94 dBm; MCS10 -
91 dBm; MCS11 -87 dBm; MCS12 -84 dBm; MCS13 -81
dBm; MCS14 -79 dBm; MCS15 -77 dBm
Receiver Sensitivity @ 5 GHz 802.11n 20 MHz
MCS0 -96 dBm; MCS1 -93 dBm; MCS2 -91 dBm; MCS3 -88
dBm; MCS4 -85 dBm; MCS5 -81 dBm; MCS6 -79 dBm;
MCS7 -77 dBm; MCS8 -94 dBm; MCS9 -92 dBm; MCS10 -
90 dBm; MCS11 -87 dBm; MCS12 -84 dBm; MCS13 -80
dBm; MCS14 -78 dBm; MCS15 -76 dBm
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
Receiver Sensitivity @ 5 GHz 802.11n 40 MHz
MCS0 -91 dBm; MCS1 -89 dBm; MCS2 -87 dBm; MCS3 -84
dBm; MCS4 -81 dBm; MCS5 -78 dBm; MCS6 -76 dBm;
MCS7 -74 dBm; MCS8 -90 dBm; MCS9 -89 dBm; MCS10 -
87 dBm; MCS11 -83 dBm; MCS12 -80 dBm; MCS13 -77
dBm; MCS14 -75 dBm; MCS15 -73 dBm
TX power @ 2,4 GHz 802.11n 20 MHz
MCS0/8 19 dBm; MCS1/9 19 dBm; MCS2/10 19 dBm;
MCS3/11 19 dBm; MCS4/12 19 dBm; MCS5/13 19 dBm;
MCS6/14 19 dBm; MCS7/15 19 dBm
TX power @ 5 GHz 802.11n 20 MHz
MCS0/8 23 dBm; MCS1/9 23 dBm; MCS2/10 22 dBm;
MCS3/11 21 dBm; MCS4/12 20 dBm; MCS5/13 19 dBm;
MCS6/14 18 dBm; MCS7/15 18 dBm
TX power @ 5 GHz 802.11n 40 MHz
MCS0/8 19 dBm; MCS1/9 19 dBm; MCS2/10 19 dBm;
MCS3/11 19 dBm; MCS4/12 19 dBm; MCS5/13 18 dBm;
MCS6/14 17 dBm; MCS7/15 17 dBm
Receiver Sensitivity @ 2.4 GHz 802.11b/g
1 Mbps -91 dBm; 2 Mbps -90 dBm; 5.5 Mbps -89 dBm; 11
Mbps -88 dBm; 6 Mbps -90 dBm;9 Mbps -89 dBm; 12 Mbps
-88 dBm; 18 Mbps -86 dBm; 24 Mbps -83 dBm; 36 Mbps -
80 dBm; 48 Mbps -76 dBm; 54 Mbps -74 dBm
TX power @ 2,4 GHz 801.11b/g
1 Mbps 19 dBm; 2 Mbps 19 dBm; 5,5 Mbps 19 dBm; 11
Mbps 19 dBm; 6 Mbps 19 dBm;9 Mbps 19 dBm; 12 Mbps
19 dBm; 18 Mbps 19 dBm; 24 Mbps 19 dBm; 36 Mbps 19
dBm; 48 Mbps 19 dBm; 54 Mbps 19 dBm
Receiver Sensitivity @ 5 GHz 802.11a/h
6 Mbps -95 dBm;9 Mbps -94 dBm; 12 Mbps -93 dBm; 18
Mbps -90 dBm; 24 Mbps -88 dBm; 36 Mbps -84 dBm; 48
Mbps -82 dBm; 54 Mbps -81 dBm
Tx Power @ 5 GHz 802.11a/h
6 Mbps -94 dBm;9 Mbps -93 dBm; 12 Mbps -92 dBm; 18
Mbps -90 dBm; 24 Mbps -88 dBm; 36 Mbps -85 dBm; 48
Mbps -82 dBm; 54 Mbps -80 dBm
Receiver Sensitivity @ 5 GHz <95dBm
ISDN
CAPI CAPI 2.0 with CAPI user concept (password for CAPI use)
ISDN auto-configuration Automatic recognition and configuration of ISDN protocols
B channel protocols
Excellent interoperability with other manufacturers (Raw
HDLC, CISCO HDLC, X.75)
ISDN leased lines Supported leased lines: D64S, D64S2, TS02, D64S2Y
X.31 over CAPI
Support for various connection paths: X.31/A for ISDN D-
channel, X.31/A+B for ISDN B-channel, X.25 within ISDN
B-channel (also leased lines)
Bit rate adaption
V.110 (1,200 up to 38,400 bps), V.120 up to 57,600 kbps
(HSCSD) for connection to GSM subscribers
ISDN protocols
Euro-ISDN (Point-to-mulitpoint/Point-to-point), 1TR6 and
other national ISDN protocols
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
VPN
IPSec Algorithms
DES (64 Bit), 3DES (192 Bit), AES (128,192,256 Bit), CAST
(128 Bit), Blowfish (128-448 Bit), Twofish (256 Bit); MD-5,
SHA-1,SHA-2 (256,384,512), RipeMD160, Tiger192 Hashes
IPSec Deffie-Hellman Groups
1 (768 Bit), 2 (1024 Bit), 5 (1536 Bit), 14 (2048 Bit), 15
(3072 Bit), 16 (4096 Bit)
Number of VPN tunnels
Inclusive 5 active VPN tunnels with the protocols IPSec,
PPTP, L2TP and GRE v.0 (also in combination possible).
Optional router extension up to 30 simultaneous utilisable
VPN tunnel via license.
PPTP (PAC/PNS)
Point to Point Tunneling Protocol for establishing fo Virtual
Privat Networks, inclusive strong encryption methods with
128 Bit (MPPE) up to 168 Bit (DES/3DES, Blowfish)
GRE v.0
Generic Routing Encapsulation V.0 according RFC 2784 for
common encapsulation
L2TP
Layer 2 tunnelling protocol inclusive PPP user
authentication
IPSec Internet Protocol Security establishing of VPN connections
IPSec hardware acceleration
Integrated hardware acceleration for IPSec encryption
algorithms DES, 3DES, AES
IPSec IKE
IPSec key exchange via preshared keys or certificates.
Support of IKEv1, IKEv2 Initiator Mode, IKEv2 Responder
Mode
IPSec IKE Config Mode
IKE Config Mode server enables dynamic assignment of IP
addresses from the address pool of the company. IKE
Config Mode client enables the router, to get assigned
dynamically an IP address.
IPSec IKE XAUTH (Client/Server)
Internet Key Exchange protocol Extended Authenticaion
client for login to XAUTH server and XAUTH server for
loging of XAUTH clients
IPSec IKE XAUTH (Client/Server)
Inclusive the forwarding to a RADIUS-OTP (One Time
Password) server (supported OTP solutions see
www.bintec-elmeg.com).
IPSec NAT-T
Support of NAT-Traversal (Nat-T) for the application at VPN
lines with NAT
IPSec IPComp
IPSec IPComp data compression for higher data throughput
via LZS
IPSec certificates (PKI)
Support of X.509 multi-level certificates compatible to
Micrososft and Open SSL CA server; upload of
PKCS#7/8/10/12 files via TFTP, HTTP, HTTP, LDAP, file
upload and manual via FCI
IPSec SCEP
Certificates management via SCEP (Simple Certificate
Enrollment Protocol)
IPSec Certificate Revocation Lists (CRL)
Support of remote CRLs on a server via LDAP or local
CRLs
IPSec Dead Peer Detection (DPD) Continuous control of IPSec connection
IPSec dynamic IP via ISDN
Transmission of dynamic IP address in ISDN D or B
channel; free-of-charge licence necessary
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
IPSec dynamic DNS
Enables the registering of dynamic IP addresses by a
dynamic DNS provider for establishing a IPSec connection.
IPSec RADIUS
Authentication of IPSec connections at a RADIUS server.
Additionally the IPSec peers, which were configured on a
RADIUS server, can be loaded into the gateway (RADIUS
dialout).
IPSec Multi User
Enables the Dial-in of several IPSec clients via a single
IPSec peer configuration entry
IPSec QoS
The possibility to operate Quality of Service (traffic shaping)
inside of an IPSec tunnel
IPSec NAT
By activating of NAT on an IPSec connection it is possible,
to implement several remote locations with identical local IP
addess networks in different IP nets for the VPN connection
Number of IPSec tunnels Inclusive 5 active IPSec tunnels (expandable to 30 tunnels)
Security
Encryption WEP/WPA
WEP64 (40 Bit key), WEP128 (104 Bit key), WPA Personal,
WPA Enterprise, WPA2 Personal, WPA2 Enterprise
Inter Cell Repeating
Inter traffic blocking for public hot spot (PHS) applications
for preventing of communication radio client to radio client in
a single radio cell.
IEEE802.11i Authentisierung und Verschlüsselung
802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS,
802.1x/EAP-PEAP, key management, PSK/TKIP
encryption, AES encryption, 802.1x/EAP
Access Control List (ACL) MAC address filter for WLAN clients
VLAN
Network segmentation on layer 2 possible, one VLAN ID per
SSID. Static VLAN configuration according to IEEE 802.1q;
supports up to 256 VLANs.
NAT/PAT
Symmetric Network and Port Address Translation
(NAT/PAT) with randomly generated ports inclusive Multi
NAT (1:1 translation of whole networks)
Policy based NAT/PAT
Network and Port Address Translation via different criteria
like IP protocols, source/destination IP Address,
source/destination port
Policy based NAT/PAT
For incoming and outgoing connections and for each
interface variable configurable
Stateful Inspection Firewall
Packet filtering depending on the direction with controling
and interpretation of each single connection status
Packet Filter
Filtering of IP packets according to different criteria like IP
protocols, source/destination IP address, source/destination
port, TOS/DSCP, layer 2 priority for each interface variable
configurable
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
Routing
Multicast IGMP
Support of Internet Group Management Protocol (IGMP v1,
v2, v3) for the simultaneous distribution of IP packets to
several stations
Multicast inside IPSec tunnel
Enables the transmission of multicast packets via an IPSec
tunnel
Multicast IGMP Proxy
For easy forwarding of multicast packets via dedicated
interfaces
RIP
Support of RIPv1 and RIPv2, separated configurable for
each interface
Extended RIP
Triggerd RIP updates according RFC 2091 and 2453,
Poisened Rerverse for a better distribution of the routes;
furthermore the possibility to define RIP filters for each
interface.
Policy based Routing
Extended routing (Policy Based Routing) depending of
diffent criteria like IP protocols (Layer4), source/destination
IP address, source/destination port, TOS/DSCP,
source/destination interface and destination interface status
Protocols
PPPoE (Server/Client)
Point-to-Point Protocol over Ethernet (Client and Server) for
establisching of PPP connections via Ethernet/DSL (RFC
2516)
DNS Forwarding
Enables the forwarding of DNS requests of free configurable
domains to assigned DNS server.
DYN DNS
Enables the registering of dynamic assigned IP addresses
at adynamic DNS provider, e.g. for establishing of VPN
connections
DNS DNS client, DNS server, DNS relay and DNS proxy
IPoA Enables the easy routing of IP via ATM
DHCP
DHCP Client, Server, Proxy and Relay for siplified TCP/IP
configuration
Packet size controling
Adaption of PMTU or automatic packet size controling via
fragmentation
PPPoA
Point to Point Protocol over ATM for establishing of PPP
connections via ATM/DSL
MLPPPoE (Server/Client)
Multilink extension MLPPPoE for bundeling several PPPoE
connections (only if both sides support MLPPPoE)
PPP/MLPPP
Support of Point to Point Protocol (PPP) for establishing of
standard PPP connections, inclusive the Multilink extension
MLPPP for the bundeling of several connections
binte c elmeg GmbH – Südwestpa rk 94 – 9044 9 Nürnberg – Deutschlan d
Telefo n: +49 9 11 967 3 0 – Tele fax: +49 9 11 688 07 25
E-Mail: info@b intec-elmeg.co m – www.bin tec-elmeg.com
binte c RS353jwv-4G
Novembe r 8, 2 018
Subje ct to tech nical alteration s
201 811080 23258
Loading...