Berkel FMS60 User Manual
MODEL FMS60
OWNER/OPERATOR
MANUAL
Berkel Company
PO Box 696
2006 Northwestern Parkway
Louisville, Kentucky 40201
(800) 348-0251
Fax 888-888-2838
F37246 Rev. B (July 2010)
TABLE OF CONTENTS
GENERAL ....................................................................................................................................3
INSTALLATION ...........................................................................................................................3
Unpacking .................................................................................................................................3
Location ....................................................................................................................................3
ELECTRICAL CONNECTIONS ..................................................................................................4
OPERATION ...............................................................................................................................5
Controls ....................................................................................................................................6
Non-Timed Mixing .....................................................................................................................6
MIXING ........................................................................................................................................7
Bowl ..........................................................................................................................................7
Agitator .....................................................................................................................................7
Wire Cage/Bowl Guard .............................................................................................................................8
Remove Wire Cage/Bowl Guard ...............................................................................................8
Install Wire Cage/Bowl Guard ...................................................................................................8
CLEANING ..................................................................................................................................8
MIXING BOWL CAPACITY CHART ...........................................................................................9
Agitators and Accessories ......................................................................................................10
MAINTENANCE ........................................................................................................................10
Motor .......................................................................................................................................10
Bowl Lift Slideways .................................................................................................................10
SERVICE ................................................................................................................................11
WARRANTY ..............................................................................................................................12
©Berkel, 2010
– 2 –
INSTALLATION, OPERATION, AND CARE OF
BERKEL FMS60 QUART MIXER
SAVE THESE INSTRUCTIONS
GENERAL
The 60 quart mixer has an AC Induction electric motor and motor control. A 60 quart bowl, B-Flat beater,
bowl guard, spiral dough hook, D wire whip, bowl truck, and ingredient chute are shipped as standard
equipment. A 0 - 15 minute timer and four plastic foot pads are standard. A #12 attachment hub is standard.
A variety of attachments are available. A 30 quart (step-down) bowl and accessories are optional.
INSTALLATION
UN PACKING
Immediately after unpacking the mixer, check for possible shipping damage. If the mixer is found to be
damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, test the electrical service to assure that it agrees with the specications on the machine
data plate.
LOCATION
Remove hex head shipping bolts with an open end wrench (or crescent wrench), that attaches the four
legs to the base-frame of the carton.
Place the mixer on a suitable sturdy level surface. There should be adequate space around the mixer for
the user to operate the controls and install and remove bowls.
FMS60 Owner/Operator Manual
– 3 –
ELECTRICAL CONNECTIONS
Electrical and grounding connections must comply with the applicable portion
of the National Electrical Code and/or other Local Electrical Codes.
Disconnect the electrical power to the machine and follow lockout/tagout
procedures. Do not remove side cover.
A hole for the 3/4" trade-size conduit is located in the top left side of the pedestal. Remove top cover. Make
electrical connections to supply harness wires in wiring area as follows:
Single-Phase Mixer:
• Connect eld supply lead L1 to supply harness wire "SERVL1".
• Connect eld supply lead L2 to supply harness wire "SERVL2".
• Cut off stripped portion of "SERVL3" harness wire and wrap securely with electrical tape to insu-
late the exposed conductor.
• Connect ground wire to ground lug on the mixer.
Three-Phase Mixer:
• Connect eld supply lead L1 to supply harness wire "SERVL1".
• Connect eld supply lead L2 to supply harness wire "SERVL2".
• Connect eld supply lead L3 to supply harness wire "SERVL3".
• Connect ground wire to ground lug on the mixer.
Assure all wires and wire connections are inside wiring area and away from belt.
For wiring details, reference wiring diagram located on the inside of the TOP COVER.
Reinstall TOP COVER.
FMS60 Owner/Operator Manual
– 4 –
Loading...