OWNER/OPERATOR
MANUAL
MODELS
829A
SLICERS
NOTICIAIMPORTANTE
Este manual contiene importantes instrucciones de seguridad que deben ser seguidas el pie de la letra cuando utilice esta maquina.
IMPORTANT NOTICE
This manual contains Important Safety Instructions which must be strictly followed when using this equipment.
829A OWNER/OPERATOR MANUAL • 15
BK46731 (June 2008)
BEFORE USING THIS EQUIPMENT
Berkel’s slicers are designed to slice meat and other food products safely and efficiently. However, unless the operator is properly trained and supervised, there is the possibility of a serious injury. It is the responsibility of the owner to ensure that this slicer is used properly and safely, strictly following the instructions contained in this manual and any requirements of local law.
No one should use or service this slicer without proper training and supervision.All operators should be thoroughly familiar with the procedures contained in this manual. Even so, Berkel cannot anticipate every circumstance or environment in which its slicers will be used. You, the owner and operator, must remain alert to the hazards posed by the function of a slicer—particularly the sharp rotating blade and moving table. No one under 18 years of age should operate this equipment. If you are uncertain about a particular task, ask your supervisor.
This manual contains a number of safe practices in the General Safety InstructionSection.Additionalwarningsareplacedthroughoutthis manual. WARNINGSRELATEDTOYOURPERSONALSAFETY
AREINDICATEDBY:
WARNING
If any warning label, wall chart or manual becomes misplaced, damaged or illegible, please contact your nearest distributor or Berkel directly, for a freereplacement.
Remember,however,THISMANUALORTHEWARNINGLABELS
DO NOT REPLACE THE NEED TO BEALERTAND TO USE YOURCOMMONSENSEWHENUSINGTHISSLICER.
14 • 829A OWNER/OPERATOR MANUAL
|
TABLE OF CONTENTS |
|
Page |
General Safety Instructions .................................................................................................... |
2-3 |
Equipment Description .............................................................................................................. |
4 |
Installation ................................................................................................................................. |
5 |
Testing Prior to Operation ......................................................................................................... |
5 |
Operating Instructions ............................................................................................................... |
6 |
Sharpener Maintenance ............................................................................................................. |
7 |
Cleaning Instructions |
|
Cleaning Sharpening Stones |
............................................................................................... 7 |
Cleaning and Sanitizing ...................................................................................................... |
8 |
Cleaning the Knife ............................................................................................................. |
9 |
Reassembly ........................................................................................................................ |
9 |
Sharpener Instructions ............................................................................................................. |
10 |
Troubleshooting ....................................................................................................................... |
11 |
Repair Parts/Repair Service ..................................................................................................... |
12 |
Specifications ........................................................................................................................... |
13 |
Warranty .................................................................................................................................. |
14 |
Berkel Company • World’s Leading Manufacturer of Slicers and Food Processing Equipment
BERKEL COMPANY
2006 Northwestern Parkway Louisville,KY40201 (800)348-0251
Form No. OM829/839APrinted in-0608RUSA Printed BerkelinCompanyUSA Berkel PartCompanyNo. 3175-0931Part No. 3175-0931
829A OWNER/OPERATOR MANUAL • 1
PELIGRO
CUCHILLAFILOSA para evitar serios accidentes a su persona siga las instrucciones de este manual y
1.NUNCA utlice esta mçquina sin previa instrucciùn y autorizaciùn de su supervisor.
2.LA MçQUINA DEBE apoyarse sobre un nivel solido y plano.
3.LOS PROTECTORES deben colocarse ANTES de enchufar y operar la mçquina.
4.SIEMPRE utilice el enchufe original proveido por el fabricante.
5.SIEMPRE utilice el utensillo para empujar la
comida - nunca su mano.
6. NUNCATOQUELACUCHILLACON LAMANO.
7.MANTENGA manos, brazos, cabello y
ropa suelta LEJOS de toda parte en movimiento de la mçquina.
8.EN CASO DE QUE LA MÇQUINA SE TRABE, apague y desconecte ANTES de sacar lo que la obstruye.
9.APAGUE Y DESCONECTE LA MçQUINAantes de limpiar, sanitizar, o arreglar.
10.UTILIZE UNICAMENTE los repuestos provistos por el fabricante.
11.EN CASO de que los membretes de ‘PELIGRO’ se desprendan de la mçquina o sean illegibles, llame al fabricante o a su representante de service Berkel para que lo reemplace sin cargo.
2 • 829A Owner/Operator Manual
WARNING
SHARP KNIFE BLADE to avoid serious personal injury
follow all the instructions in this manual and
1.NEVER touch this machine without training and authorization by your supervisor.
2.MACHINE MUST BE on solid level support.
3.GUARDS MUST BE in place before plugging in and turning on machine.
4.ALWAYS use three pronged plug provided.
5. ALWAYS use food pusher not your hand.
6. NEVER TOUCH ROTATING KNIFE.
7.KEEP hands, arms, hair and loose clothing clear of all moving parts.
8.SHOULD MACHINE JAM, turn off and unplug before removing obstruction.
9.TURN OFF AND UNPLUG machine from power source before cleaning, sanitizing or servicing.
10.USE ONLY the attachments provided by the manufacturer.
11.SHOULD any warning label on a machine come off or become unreadable contact the manufacturer or your designated Berkel service location for a free replacement.
829A Owner/Operator Manual • 3
Loading...