Beko WTE 10712 PAR PRODUCT INFORMATION SHEET
Supplier’s name or trade mark:
Beko
Supplier’s address :
Arctic S.A Gaesti, Dambovita, 13 Decembrie Street, No 210, Romania
Model identifier:
General product parameters:
Parameter Value
Rated capacity (kg)
EEI
w
Washing efficiency index
Energy consumption in kWh per cycle,
based on the eco 40-60 programme.
Actual energy consumption will depend
on how the appliance is used.
10,0
59,5
1,04
0,588
WTE 10712 PAR 7145649100
Parameter Value
Dimensions in cm 60
Energy efficiency class
Rinsing effectiveness (g/kg)
Water consumption in litre per cycle,
based on the eco 40-60 programme.
Actual water consumption will depend
on how the appliance is used and on the
hardness of the water.
Height
Width
Depth
84
64
B
4,9
52
Maximum temperature inside the
treated textile (°C)
Spin speed (rpm)
Programme duration (h:min)
Airborne acoustical noise emissions
in the spinning phase (dB(A) re 1 pW)
Rated
capacity
Half
Quarter
Rated
capacity
Half
Quarter
Rated
capacity
Half
Quarter
76
33
32
23
1400
1400
1400
3:58
2:59
2:59
Remaining moisture content (%)
Spin-drying efficiency class
Type
Airborne acoustical noise emission
class (spinning phase)
Rated
capacity
Half
Quarter
B
Free-Standing
B
53
53
53
Off-mode (W)
Delay start (W) (if applicable)
Minimum duration of the guarantee offered by the supplier :
0,50
4,00
This product has been designed to release silver ions
during the washing cycle
Standby mode (W)
Networked standby (W) (if applicable)
24 months
NO
1,00
NA
Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU)
2019/2023 is found:
http://support.beko.com
Loading...