Beko WMP 10744 XA User manual [EN,FR]

Washing Machine

User’s Manual

Lave-linge

Manuel d‘utilisation

EN / FR

Document Number=

WMP 10744 XA

2820525815_EN/ 19-03-19.(15:49)

1 General safety instructions

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

1.1 Life and property safety

Never place the product on a carpet-covered floor. Otherwise, lack of airflow

beneath the machine will cause electrical parts to overheat. This will cause problems with your product.

Unplug the product when it is not in use.

Always have the installation and repairing procedures carried out by the

Authorised Service Agent. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

The water supply and draining hoses must be securely fastened and remain

undamaged. Otherwise, there is the risk of water leakage.

Never open the loading door or remove the filter while there is still water in

the drum. Otherwise, risk of flooding and injury from hot water will occur.

Do not force open the locked loading door. The door will open immediately

after the washing cycle has ended. If the door does not open, apply the solutions provided for "Loading door cannot be opened." error in the Troubleshooting section. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.

Use detergents, softeners and supplements suitable for automatic washing

machines only.

Follow the instructions on the textile tags and on the detergent package.

Laundry that is previously washed, cleaned, soiled or stained with petrol /

gasoline, dry cleaning solvents or other flammable or explosive substances must not be dried in the machine as they give out flammable or explosive steam. For this reason, they must not be used in the Refresh programme or in the Wash&Wear auxiliary function selection. It may cause fire risk.

This product was manufactured using the latest technology in environmentally friendly conditions.

2 / EN

Washing Machine / User’s Manual

Laundry stained with Liquid cooking oil, acetone, alcohol, petrol, kerosene,

spot removers, turpentine, waxes and wax removers must be washed in hot water with plenty of detergent beforehand. After the washing programme, it can be used in the Refresh programme or in the Wash&Wear auxiliary function selection.

Foam rubber (latex foam), shower caps, waterproof textiles, clothes or

pillows with rubber support or rubber foam pads must not be used in the Wash&Wear auxiliary programme selection or in the Refresh programme. It may cause fire risk.

If you use washing ball, detergent scale, laundry clothing cages and balls

in your machine, they can melt during drying. Do not use it in the Refresh programme or in the Wash&Wear auxiliary function selection. It may cause fire risk.

If you are using industrial chemicals for cleaning, never use the Refresh

programme or the Wash&Wear auxiliary programme. It may cause fire risk.

Do not touch loading door glass with bare hands after drying. There is the

risk of getting burnt.

In the Refresh programme and the Wash&Wear auxiliary programme

selection, there is a cooling process as the final step to make sure that the laundry remains at a temperature that will not harm the user. You may be exposed to hot steam if you open the door before cooling is complete. There is the risk of scalding.

If the programme is interrupted (programme cancellation or power failure)

during the Refresh programme or the Wash&Wear auxiliary function selection, the laundry in the machine may be hot. Be careful.

During the Refresh programme or the Wash&Wear auxiliary programme

selection, do not stop the machine before these steps are complete. If you have to stop the machine, remove all laundry and lay them in a suitable place to let them cool down.

Your product is suitable to operate in ambient temperatures between 0OC

and +35OC.

Ambient temperatures between 15OC and +25OC are ideal temperatures for

your product.

Do not let pets enter the product. Check inside the product before using.

Do not operate the Refresh programme and the Wash&Wear programme

after overloading the machine. Observe the maximum load levels specified.

Leather laundry and laundry that contains leather must not be used in

the Refresh programme and the Wash&Wear auxiliary function selection. Leather parts give away colour.

Washing Machine / User’s Manual

3 / EN

In failures that cannot be repaired using information given in safety

instructions, turn off the machine, unplug the power cable and call the Authorised Service Agent.

The machine must not be used only in the Refresh programme for a long

time. If it is being used only in the said programme for a long time, it must be operated unloaded in one of the short washing programmes after every 15 cycles.

Check all clothes before loading them into the machine and ensure that

they do not have objects such as lighters, coins, metal pieces, needles in the pockets or inside.

Underwear with metal attachments must not be used in the Refresh

programme and the Wash&Wear auxiliary function selection. Metal supports might come off during drying and cause damage in the machine.

Large laundry such as tulles, rugs, blankets, duvets etc. must not be used

in the Refresh programme and the Wash&Wear auxiliary function selection. Your laundry might get damaged.

Do not use fabric softeners or static preventers in the machine unless

recommended by the manufacturer.

Products such as fabric softeners must be used in accordance with

manufacturer's instructions.

Delicate laundry that contains silk, wool etc. must not be used in the

Refresh programme and the Wash&Wear auxiliary function selection. Otherwise, wool clothes may get shrunken and other sensitive clothes may get damaged.

Check symbols on the garment tag before starting the programmes.

1.2 Children's safety

This product can be used by children at and above 8 years old and by persons

whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children should not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children under the age of 3 should be kept away unless continuously supervised.

Packaging materials are dangerous to children. Keep packaging materials

in a safe place away from reach of the children.

Electrical products are dangerous for the children. Keep children away from

the product when it is in use. Do not allow them to play with the product. Use child lock to prevent children from intervening with the product.

4 / EN

Washing Machine / User’s Manual

Do not forget to close the loading door when leaving the room where the

product is located.

Store all detergents and additives in a safe place away from the reach of

the children by closing the cover of the detergent container or sealing the detergent package.

1.3 Electrical safety

If the product has a failure, it should not be operated unless it is repaired by

the Authorised Service Agent. There is risk of electric shock!

This product is designed to resume operating in the event of powering

on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

Connect the product to a grounded outlet protected by a 16 A fuse. Do not

neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that may arise when the product is used without grounding in accordance with the local regulations.

Never wash the product by spreading or pouring water onto it! There is risk

of electric shock!

Never touch the power cable plug with wet hands! Never unplug by pulling

on the cable. Always press on the plug with one hand and pull out the plug by grabbing with the other hand.

Product should be unplugged during installation, maintenance, cleaning

and repair procedures.

If the power cable is damaged, it must be replaced by the manufacturer,

authorized service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks.

1.4 Hot surface safety

Washing Machine / User’s Manual

The glass of the loading door gets too hot while washing at higher temperatures. Therefore, especially do not allow children touch the loading door glass while washing.

5 / EN

Important instructions for environment

2.1 Compliance with WEEE Directive

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to

learn about these collection centers. Compliance with RoHS Directive: The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

2.2 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

3 Intended use

• This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.

•

The product must only be used for washing, rinsing and making ready to wear the laundry that are marked accordingly.

• The manufacturer waives any responsibility arisen from incorrect usage or transportation.

• The service life of your product is 10 years. During this period, original spare parts will be available to operate the product properly.

6 / EN

Washing Machine / User’s Manual

4 Technical specifications

Complying Commission Delegated Regulation (EU) No 1061/2010

Supplier name or trademark Beko Model name WMP 10744 XA Rated capacity (kg) 10 Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 0,900 Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0,620 Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0,620 Power consumption in ‘off-mode’ (W) 0,440 Power consumption in ‘left-on mode’ (W) 0,640 Annual Water Consumption (l) Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) B Maximum spin speed (rpm) 1400 Remaining moisture Content (%) 53 Standard cotton programme Programme time of the standard 60°C cotton programme at full load (min) 245 Programme time of the standard 60°C cotton programme at partial load (min) 210 Programme time of the standard 40°C cotton programme at partial load (min) 210 Duration of the left-on mode (min) N/A Airborne acoustical noise emissions washing/spinning (dB) 55/76 Built-in No Height (cm) 84 Width (cm) 60 Depth (cm) 64 Net weight (±4 kg.) 76 Single Water inlet / Double Water inlet

• Available Electrical input (V/Hz) 230 V / 50Hz Total current (A) 10 Total power (W) 2200 Main model code 9714

(1)

Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the

consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.

(2)

Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water

consumption will depend on how the appliance is used.

(3)

“Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in terms of combined energy and water consumption.

Technical specifications may be changed without prior notice to improve the quality of the product.

(1)

(2)

(3)

Cotton Eco 60°C and 40°C

167

11219

• / -

Washing Machine / User’s Manual

7 / EN

4.1 Installation

• Apply to the nearest authorized service agent for the installation of your product.

• Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

• Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

• Make sure that the installation and electrical connections of the product are performed by authorized service agent. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

• Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

• Operate the product in a well ventilated and dust free environment.

4.1.1 Appropriate installation location

• Place the product on a solid and level floor. Do not place it onto a carpet with high pile or other similar surfaces.

• Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product at places where temperature may fall below 0ºC.

• Leave a minimum space of 1.5 cm between the product and the furniture.

• If you will install the product on a surface with steps, never place it close to the edge.

• Do not place the product on any platform.

• Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine and do not use them on the product.

4.1.2 Removing packaging reinforcement

Tilt the product backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Do not make this operation alone by yourself.

4.1.3 Removing transportation safety bolts

1 Loosen all transportation safety bolts with an appropriate wrench until they turn freely. 2 Remove transportation safety bolts by turning them gently. 3 Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel.

8 / EN

Washing Machine / User’s Manual

WARNING: Remove the transportation safety bolts before operating the product! Otherwise, the product will get

4.1.4 Connecting water supply

1 Tighten all hose nuts by hand. Never use a tool when tightening the nuts. 2 Open the taps completely after making the hose connection to check for water leaks at the connection

damaged.

Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future.

Install the transportation safety bolts in reverse order of the disassembly procedure. Never move the product without the transportation safety bolts properly fixed in place!

The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in 1 minute to have your product run smoothly. Attach a pressure reducing valve if water pressure is higher.

If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must install the supplied stopper to the hot water valve before operating the product. (Applies for the products supplied together with a blind stopper group.)

WARNING: Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will

get damaged or the product will switch to protection mode and will not operate.

WARNING: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

points. If any leak occurs, turn off the tap and remove the nut. Retighten the nut carefully after checking the gasket. In order to prevent the water leaks and resultant damages, keep the taps closed when you do not use the product.

4.1.5 Connecting the drain hose to the drain

• Attach the end of the drain hose directly to waste water drain, washbasin or bathtub.

WARNING: Your house will be flooded if the drain hose is dislocated during water draining. Moreover, there is risk of

• Connect the drain hose to a minimum height of 40 cm and a maximum height of 100 cm.

• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water draining becomes more difficult and the laundry may come out excessively wet. Therefore, observe the heights described in the figure.

Washing Machine / User’s Manual

scalding due to high washing temperatures! In order to prevent such situations and make sure that the product performs water intake and drain processes without any problem, fix the drain hose securely.

100 cm

40 cm

9 / EN

• To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.

• The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the product.

• If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

4.1.6 Adjusting the feet

WARNING: In order to ensure that the product operates more silently and vibration-free, it must stand level and

1 Loosen the lock nuts on the feet by hand. 2 Adjust the feet until the product stands level and balanced. 3 Tighten all lock nuts again by hand.

4.1.7 Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any damages that may arise when the product is used without grounding in accordance with the local regulations.

• Connection must comply with national regulations.

• The electrical connection cable infrastructure of the product must be adequate and suitable for product requirements. It is recommended to use a residual current device.

• Power cable plug must be within easy reach after installation.

• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.

• The voltage specified in the "4. Technical specifications" section must be equal to your mains voltage.

• Do not make connections via extension cables or multi-plugs.

balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing, noise and vibration problems.

WARNING: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

4.1.8 Initial use

10 / EN

WARNING: Damaged power cables must be replaced by the Authorised Service Agent.

Before starting to use the product make sure that the preparations described in section “2. Environmental instructions” and “4.1 Installation”. To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If this program is not available in your product, apply the method which is described in section "4.4.2 Cleaning the loading door and the drum".

Use an anti-limescale suitable for the washing machines.

Some water has remained in the product due to the quality control processes in the production. It is not harmful for the product.

Washing Machine / User’s Manual

4.2 Preparation

4.2.1 Sorting the laundry

• Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.

• Always obey the instructions given on the garment tags.

4.2.2 Preparing laundry for washing

• Laundry items with metal attachments such as, underwiring, belt buckles or metal buttons will damage the product. Remove the metal pieces or wash such clothes by putting them in a laundry bag or pillow case. This kind of clothes may overheat in the Refresh programme and in the Wash&Wear auxiliary function selection and harm your laundry. For this reason, do not this kind of laundry in the Refresh programme or in the Wash&Wear auxiliary function selection.

• Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush if possible. Such objects may damage the product or cause noise problem.

• Put small size clothes such as infant socks and nylon stockings in a laundry bag or a pillow case.

• Place curtains in without compressing them. Remove curtain attachment items. Do not use tulles or curtains in the Refresh programme or in the Wash&Wear auxiliary function selection.

• Wash “machine washable” or “hand washable” labeled products only with an appropriate programme. Hang them or lay them to dry. Do not use them in the Wash&Wear auxiliary programme selection.

• If you plan to select the Wash&Wear auxiliary function, select the highest spin speed recommended during washing process.

• Fasten zippers, sew loose buttons and mend rips and tears.

• Wash “Machine washable” or “Hand washable” labeled products only with an appropriate programme.

• Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.

• Persistent stains must be treated properly before washing. If unsure, check with a dry cleaner.

• Only use the dyes / color changers and descaling agents which are appropriate for machine wash. Always follow the instructions on the package.

• Wash trousers and delicate laundry turned inside out.

• Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will reduce piling.

• Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the product. Such dusts and powders on the laundry may build up on the inner parts of the product in time and can cause damage.

4.2.3 Tips for energy saving

Following information will help you use the product in an ecological and energy-efficient manner.

• Operate the product in the highest load capacity allowed for the programme you have selected, but do not overload. See "4.3.3 Programme and consumption table"

• Always follow the instructions on the detergent packaging.

• Wash slightly soiled laundry at low temperatures.

• Use faster programmes for small quantities of lightly soiled laundry.

• Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.

• Do not use detergent in excess of the amount recommended on the detergent package.

4.2.4 Loading the laundry

1 Open the loading door. 2 Put the laundry items into the product in a loose manner. 3 Push the loading door to close it until you hear a locking sound. Ensure that no items are caught in the

door. The loading door is locked while a programme is running. The door lock will open immediately after the washing programme has ended. Then you can open the loading door. If the door does not open, apply the solutions provided for "Loading door cannot be opened." error in the Troubleshooting section.

Washing Machine / User’s Manual

11 / EN

4.2.5 Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the desired washing programme. The product automatically adjusts the water amount according to the weight of the laundry put inside it.

WARNING: Comply with the information in “4.3.3 Programme and consumption table”. When overloaded, product's

washing performance will drop. Moreover, noise and vibration problems may occur.

Laundry type Weight (g) Laundry type Weight (g)

Bathrobe 1200 Hand towel 100 Fabric napkin 100 Women night gown 200 Duvet cover 700 Underclothing 100 Bed sheet 500 Men’s overalls 600 Pillowcase 200 Men’s shirt 200 Tablecloth 250 Men’s pajamas 500 Towel 200 Blouses 100

4.2.6 Using detergent and softener

When using detergent, softener, starch, fabric dye, bleach and descaling agents; read the manufacturer's instructions written

Detergent, softener and other cleaning agents

• Add detergent and softener before starting the washing programme.

• Never leave the detergent drawer open while the washing programme is running!

• When using a programme without prewash, do not put any detergent into the prewash compartment (compartment nr. "1").

• In a programme with prewash, do not put liquid detergent into the prewash compartment (compartment nr. "1").

• Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the laundry in the product.

• If you are using liquid detergent, do not forget to place the liquid detergent cup into the main wash compartment (compartment nr. "2").

Choosing the detergent type

Detergent type to be used depends on the fabric type and color.

• Use different detergents for coloured and white laundry.

• Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) used solely for delicate clothes.

• When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.

• Wash woolens with a special detergent made specifically for woolens.

Adjusting detergent amount

The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.

• Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.

• Use lesser detergent for small amounts or lightly soiled clothes.

on the package and follow the dosages specified. Use measuring cup if available.

The detergent drawer is composed of three compartments: – (1) for prewash – (2) for main wash – (3) for softener – ( ) in addition, there is a siphon piece in the softener compartment.

WARNING: Use only detergents manufactured specifically for washing machines. WARNING: Do not use soap powder.

12 / EN

Washing Machine / User’s Manual

Using softeners

Pour the softener into the softener compartment of the detergent drawer.

• Do not exceed the (>max<) level marking in the softener compartment.

• If the softener has lost its fluidity, dilute it with water before adding it in the detergent compartment.

WARNING: Do not use liquid detergents or other cleaning products other than fabric softeners produced for washing

Using liquid detergents If the product contains a liquid detergent cup:

• Put the liquid detergent container into the compartment no “2”.

• If the liquid detergent has lost its fluidity, dilute it with water before putting in the detergent cup.

If the product is equipped with a liquid detergent part:

• When you want to use liquid detergent, pull the apparatus towards yourself. The part that falls down will

machines to soften the clothes.

serve as a barrier for the liquid detergent. If required, clean the apparatus with water when it is in place or by removing it. If you will use powder detergent, the apparatus must be secured at top position.

If the product does not contain a liquid detergent cup:

• Do not use liquid detergent for the prewash in a programme with prewash.

• Liquid detergent stains your clothes when used with "End Time" function to started delayed. If you are going to use the End Time function, do not use liquid detergent.

Using gel and tablet detergent

• If the gel detergent thickness is fluidal and your product does not contain a special liquid detergent container, put the gel detergent into the main wash detergent compartment during first water intake. If your product contains a liquid detergent container, fill the detergent into this container before starting the programme.

• If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly into the drum before washing.

• Put tablet detergents into the main wash compartment (compartment nr. "2") or directly into the drum before washing.

Using starch

• Add liquid starch, powder starch or the fabric dye into the softener compartment.

• Do not use softener and starch together in a washing cycle.

• Wipe the inside of the product with a damp and clean cloth after using starch.

Using limescale remover

• When required, use limescale removers manufactured specifically for washing machines only.

Using bleaches

• Select a programme with prewash and add the bleaching agent at the beginning of the prewash. Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse and add the bleach while the product is taking water from the detergent compartment during first rinsing step.

Washing Machine / User’s Manual

13 / EN

• Do not use bleaching agent and detergent by mixing them.

• Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation.

• Do not pour the bleach onto the laundry.

• Do not use it with the colored items.

• When using oxygen based bleaches, select a programme that washes at a lower temperature.

• Oxygen-based bleach can be used together with the detergent. However, if its thickness is not the same with the detergent, put the detergent first into the compartment no. "2" in the detergent drawer and wait until the detergent flows while the product is taking in water. While the product continues taking in water, add bleach in the same compartment.

4.2.7 Tips for efficient washing

Clothes

Heavily Soiled

(difficult stains such as grass, coffee, fruits and blood.)

Normally Soiled

Soiling Level

(For example, stains caused by body on collars and cuffs)

Lightly Soiled

(No visible stains exist.)

Light Colours and Whites Colours

(Recommended temperature range based on soiling level: 40-90 oC)

It may be necessary to pretreat the stains or perform prewash. Powder and liquid detergents recommended for whites can be used at dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches.

Powder and liquid detergents recommended for whites can be used at dosages recommended for normally soiled clothes.

Powder and liquid detergents recommended for whites can be used at dosages recommended for lightly soiled clothes.

(Recommended temperature range based on soiling level: cold -40 oC)

Powder and liquid detergents recommended for colors can be used at dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches. Detergents which do not contain bleach should be used.

Powder and liquid detergents recommended for colors can be used at dosages recommended for normally soiled clothes. Detergents which do not contain bleach should be used.

Powder and liquid detergents recommended for colors can be used at dosages recommended for lightly soiled clothes. Detergents which do not contain bleach should be used.

Black/Dark

Colours

(Recommended temperature range based on soiling level: cold -40 oC)

Liquid detergents suitable for colors and dark colors can be used at dosages recommended for heavily soiled clothes.

Liquid detergents suitable for colors and dark colors can be used at dosages recommended for normally soiled clothes.

Liquid detergents suitable for colors and dark colors can be used at dosages recommended for lightly soiled clothes.

Delicates/

Woolens/Silks

(Recommended temperature range based on soiling level: cold -30 oC)

Prefer liquid detergents produced for delicate clothes. Woolen and silk clothes must be washed with special woolen detergents.

4.2.8 Displayed Program Time

You can see the programme duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, foaming, unbalanced load conditions, fluctuations in power supply, water pressure and program settings, the programme duration is automatically adjusted while the programme is running. SPECIAL CASE: At programme start of Cottons and Cotton Eco programmes, display shows the duration of half load, which is the most common use case. After programme starts, in 20-25 minutes actual load is detected by the machine. And if the detected load is higher than half load; washing program will be adjusted accordingly and program duration increased automatically. You may follow this change on the display.

14 / EN

Washing Machine / User’s Manual

4.3 Operating the product

4.3.1 Control panel

3 4

Algodón

Algodão

Cuidado en frío

Refrescado

Manchas PRO

Camisas

Edredón

Algodón

Algodão

Sintéticos Rápido 28’

Rápido 14’

R. oscura

R. escura

Lana

Lã

Delicados

1. Programme selection knob 2 - Spin Speed Adjustment button 3 - Temperature adjustment button 4 - Display 5 - Programme follow-up indicator 6 - On / Off button 7 - Start / Pause button

4.3.2 Display symbols

a b c d e f g

8 - End Time Adjustment button 9 - Auxiliary Function button 4 10 - Auxiliary Function button 3 11 - Auxiliary Function button 2 12 - Auxiliary Function button 1 13 - Programme Selection LEDs

WMP 10744 XA

891011

1888

a - Temperature indicator b - Electrical connection c - Steam indicator d - Audio Warning indicator e - No Water indicator f - Detergent indicator g - Start / Pause indicator

The visuals used for machine description in this section are schematic and may not match exactly will the features of your

Washing Machine / User’s Manual

machine.

88:88

ijklm

h - Program Follow-up indicator i - End Time indicator j - Duration Information Line k - Auxiliary Function indicators l - Lock indicator m - Spin Speed indicator

15 / EN

4.3.3 Programme and consumption table

Auxiliary functions

Clean&Wear

• •

Selectable

temperature

range °C

Anti-Crease+

Cold-90

Programme

Max. Load (kg)

Water Consumption (l)

Energy Consumption (kWh)

Max. Speed***

Prewash

Fast+

90 10

Algodón

Algodón Eco

Sintéticos

Rápido 28’ / Rápido 14

Rápido 28’ / Rápido 14 + Fast+ 30 2 40 0,15 1400 • • • Cold-90 Lana Delicados 40 4 57 0,60 1200 Cold-40 Edredón 60 - 105 1,65 1000 Cold-60 Refrescado - 1 1 0,22 - * R. oscura 40 4,5 86 0,90 1200 • • • • Cold-40 Manchas PRO 60 5 82 1,60 1400 • • • 30-60 Camisas 60 4 75 1,25 800 • • • • • Cold-60 Hygiene+ 90 9 75 1,20 1400 • 20-90 Cuidado en frío 30 5,5 55 0,20 1400 • • Cold-30 auto (Programa automático) 60 10 - - 1400 • • • • • Cold-60 Drum Cleaning+ 90 - 85 2,00 700 * 70

• : Selectable. * : Automatically selected, no canceling. ** : Energy Label programme (EN 60456 Ed.3) *** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. **** : Programme detects the type and quantity of the laundry to automatically adjust water and energy consumption and

programme time.

- : See the programme description for maximum load.

** "Cotton eco 40°C and Cotton eco 60°C are standard programmes." These programmes are known as '40°C cotton standard programme' and '60°C cotton standard programme' and indicated with the symbols on the panel.

The auxiliary functions in the table may vary according to the model of your machine.

Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.

You can see the washing duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual duration of the wash cycle. Duration will be automatically updated soon after the washing starts.

"Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or removed." "The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine."

60 10 100 1,40 1400 • • • • • Cold-90

40 10 97 1,10 1400 • • • • • Cold-90 60** 10 59 0,900 1400 Cold-60 60** 5 45 0,620 1400 Cold-60 40** 5 45 0,620 1400 Cold-60

60 5 75 1,45 1200 • • • • • Cold-60

40 5 75 0,90 1200 • • • • • Cold-60

90 10 80 2,10 1400 • • • Cold-90

60 10 80 1,10 1400 • • • Cold-90

30 10 78 0,20 1400 • • • Cold-90

40 2 56 0,45 1200 Cold-40

100 2,30

1400

• •

Pet Hair Removal

•

16 / EN

Washing Machine / User’s Manual

Indicative values for Synthetics programmes (EN)

Synthetics 60

Synthetics 40

Load (kg)

Water

Consumption (l)

Energy

Consumption

(kWh)

Programme

5 75 1,45 125/160 5 75 0,90 125/160

Remaining Moisture Content

(%) **

Duration (min)

≤ 1000 rpm > 1000 rpm

45 40

Remaining Moisture Content

(%) **

* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time.

** Remaining moisture content values may differ according to the selected spin speed.

Cottons Cottons

Drain

(Pump)

Synthetics

Eco

Fast+ Rinse

On/Off Rinse Stain

Wool /

Hand Wash

Plus

Hand Wash

Pet hair removal

Expert

Daily Xpress / Xpress Super

creasing

Hygiene+

Short

mode

Automatic

Programme

Wear

Drum

Cleaning

TemperatureAnti

Cool

Clean

Mix Delicate Sports /

SpinPre-wash Night

Duvet /

Down Wear

spin

Auto

Dosing

Outdoor

Cold Rinse

Hygiene

DarkCare /

Jeans

hold

Steam

Lingerie

Time delay

Air Refresh

(Clean&Wear)

Wool /

Shirts Down

4.3.4 Programme selection

1 Determine the programme suitable for the type, quantity and soiling level of the laundry in accordance with

"Programme and consumption table".

Programmes are limited with the highest spin speed appropriate for that particular type of fabric. When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water

2 Select the desired programme with the Programme Selection knob.

temperature. Always select the lowest appropriate temperature. Higher temperature means higher electricity consumption.

88 1888

88:88

4.3.5 Programmes

• Algodón eco (Cottons Eco)

Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than all other programmes, it provides high energy and water savings. Actual water temperature may be different from the stated wash temperature. When you load the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. In this case, energy and water consumption will decrease more, providing a more economic wash.

• Algodón (Cottons)

You can wash your durable cotton laundry (sheets, bedlinen, towels, bathrobes, underwear etc.) in this programme. When the quick wash function key is pressed, programme duration becomes notably shorter but effective washing performance is ensured with intense washing movements. If the quick wash function is not selected, superior washing and rinsing performance is ensured for your heavily soiled laundry.

Washing Machine / User’s Manual

17 / EN

• Sintéticos (Synthetics)

You can wash your laundry (such as shirts, blouses, synthetic/cotton blended fabrics etc.) in this programme. The programme duration gets notable shorter and washing with high performance is ensured. If the quick wash function is not selected, superior washing and rinsing performance is ensured for your heavily soiled laundry.

• Lana (Woollens / Hand Wash)

Use to wash your woolen/delicate laundry. Select the appropriate temperature complying with the tag of your clothes. Your laundry will be washed with a very gentle washing action in order not to damage the clothes.

"Woolens programme of this machine is approved by “The Woolmark Company” for washing machine-washable woolen products provided that the products are washed in accordance with the instructions on the product tag and the instructions published by the manufacturer of this machine. M1352" In UK, Ireland, Hong Kong and India, the Woolmark trademark is a Certification trademark.

• Hygiene+

Use this programme for your laundry for which you require an anti-allergic and hygienic washing at high temperature with intensive and long washing cycle. The high level of hygiene is ensured thanks to long heating duration and additional rinsing step.

• Programme was tested by the “VDE” institute with the 20°C temperature option selected and it was certified in terms of its efficacy in eliminating bacteria and mould.

• Programme was tested by “The British Allergy Foundation” (Allergy UK) with the 60°C temperature option selected and it was certified in terms of its efficacy in eliminating allergens in addition to bacteria and mould.

Allergy UK, is the brand of the British Allergy Association. Seal of Approval is created to guide people that require recommendation about a product that the related product restricts / reduces / eliminates the allergens or reduces the allergen content significantly in the ambient where allergy patients exist. It aims to provide assurance that the products are tested scientifically or examined in a way to provide measurable results.

• Edredón (Duvet / Down Wear)

Use this programme to wash your fiber duvets that bear "machine washable" tag. Check that you have loaded the duvet correctly in order not to damage the machine and the duvet. Remove the duvet cover before loading the duvet into the machine. Fold the duvet into two and load it into the machine. Load the duvet into the machine paying attention to place it in a way that it will not contact the bellow or the glass.

Do not load more than 1 double fiber duvet (200 x 200 cm).

Do not wash your duvets, pillows and etc. that contain cotton in the machine.

CAUTION: Do not wash the items apart from duvets such as carpets, rugs and etc. in the machine. Otherwise,

permanent damage will occur in the machine.

• Spin+Drain

You can use this function to remove the water on the garment of drain the water in the machine.

• Rinse

Use when you want to rinse or starch separately.

• Refrescado (Refresh)

Use this programme to remove the odour on the laundry that have been worn only once and do not contain any stains. Laundry is refreshed with warm air.

18 / EN

Washing Machine / User’s Manual

• Camisas (Cuff & Collar)

This programme is used to wash the shirts made from cotton, synthetic and synthetic blended fabrics altogether. It reduces wrinkles. When the quick wash function is selected, the Pre-treatment algorithm is executed.

• Apply the pre-treatment chemical on your garments directly or add it together with detergent when the machine starts to take water from the main washing compartment. Thus, you can obtain the same performance as you obtain with normal washing in a much shorter period of time. Usage life of your shirts increases.

• Rápido 28’ / Rápido 14 (

Use this programme to wash your lightly soiled or unspotted cotton clothes in a short time. The programme duration can be reduced up to 14 minutes when the quick wash function is selected. When the quick wash function is selected, maximum 2 (two) kg of laundry must be washed.

• R. oscura (

Use this programme to protect the colour of your dark-coloured garments or jeans. It performs high performance washing with special drum movement even if the temperature is low. It is recommended to use liquid detergent or woolen shampoo for dark coloured laundry. Do not wash your delicate clothes containing wool or etc.

• Auto

Use to wash frequently washable cotton, synthetic or blended (cotton+synthetic) clothes. Programme detects the type and quantity of the laundry to automatically adjust water consumption and programme time.

The maximum washing temperature in Automatic programme depending on the soiling level and laundry type is 60ºC. Washing performance may not be at the desired level for heavily soiled whites and stubborn stains (collar, sock soil, perspiration stain, etc.). In this case, it is recommended to select Cottons programme with prewash and set the temperature to 50-60°C. Many types of clothing are correctly detected and safely washed in Automatic programme.

• Delicados (Delicate)

You can wash your delicate clothes such as cotton/synthetic blended knitwear or hosiery in this programme. It washes with more delicate washing action. Wash your clothes whose colour you want to preserve either at 20 degrees or by selecting the cold wash option.

Dark Care / Jeans)

CAUTION: Do not wash your woolen and delicate clothes in this programme.

Select a suitable temperature if the temperature shown on the temperature display is not compatible with the warnings on the garment label.

Daily Xpress / Xpress Super Short)

• Cuidado en frío (CoolClean)

Use to wash your moderately soiled and durable cotton/synthetic laundry. An effective washing is provided thanks to the intense washing action and double jet system.

• Manchas PRO (

The machine has a special stain programme which enables the removal of different types of stains in the most effective way. Use this programme only for durable colourfast cotton laundry. Do not wash delicate and pigmenting clothes and laundry in this programme. Before washing, garment tags should be checked (recommended for cotton shirts, trousers, shorts, t-shirts, baby clothes, pyjamas, aprons, table clothes, beddings, duvet cover, bed sheet, pillowcase, bath-beach towel, towel, socks, cotton underwear that are suitable for washing at high temperature and long time). In the automatic stain programme, you can wash 24 types of stains divided into two different groups according to quick function selection. You can see stain groups based on the selection of the quick function.

Washing Machine / User’s Manual

StainExpert)

19 / EN

You can find stain groups based on quick function below:

When quick function is selected:

Blood Tea Red Wine

Chocolate Coffee Curry

Pudding Fruit juice Jam

Egg Ketchup Coal

When quick function is not selected:

Butter Sweat Salad Dressing

Grass Collar Soil Make-up

Mud Food Machine Oil

Coke Mayonnaise Baby Food

• Select the stain programme.

• Select the stain you want to clean by locating it in the groups above and selecting the related group with the quick auxiliary function key.

• Read the garment tag carefully and ensure that correct temperature and spin speed are selected.

4.3.6 Temperature selection

Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature indicator. It is possible that the recommended temperature value is not the maximum temperature that can be selected for the current programme.

88 1888

88:88

Press the Temperature Adjustment button to change the temperature. Temperature will decrease by steps of 10 °C. Finally, “-” symbol indicating the cold wash option appears on the display.

1888

88:88

No change can be made in programmes where temperature adjustment is not allowed.

You can also change the temperature after the washing starts. This change can be made if the washing steps allow it. Changes cannot be made if the steps do not allow it.

If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the

20 / EN

temperature.

Washing Machine / User’s Manual

4.3.7 Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the Spin Speed indicator.

It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current

Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.

If you are not going to unload your laundry immediately after the programme completes, you can use Rinse Hold function in order to prevent them from getting wrinkled when there is no water in the machine.

This function holds the laundry in the final rinsing water.

programme.

88 1888

88:88

Spin Speed Adjustment button only serves for decreasing the spin speed.

Rinse Hold option is indicated with “ı_ı” symbol and No Spin option is indicated with “_” symbol.

88:88

If you want to spin your laundry after the Rinse Hold function:

- Adjust the Spin Speed.

- Press Start / Pause / Cancel button. The programme will resume. Machine drains the water and spins the laundry. If you want to drain the water at the end of the programme without spinning, use No Spin function.

88:88

No change can be made in programmes where spin speed adjustment is not allowed.

You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be made if the steps do not allow it.

Rinse hold

If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start / Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water. If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button. The programme will resume. Water is drained, laundry is spun and the programme is completed.

Washing Machine / User’s Manual

21 / EN

4.3.8 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, frames of the auxiliary function symbol that can be selected together with it illuminates. And when you select an auxiliary function, the interior area of the auxiliary function symbol also starts to illuminate.

88 1888

88:88

Frame of the auxiliary function symbol that cannot be selected with the current programme does not illuminate.

Also the frames of the auxiliary function suitable for the current programme after the washing has started remains illuminated. You can select or cancel the auxiliary functions whose frames are illuminated. If the wash cycle has reached a point where you cannot select the auxiliary function, the function's frame turns off.

Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain

4.3.8.1 Auxiliary functions

• Prewash

A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time.

• Fast+

When this function is selected, the durations of the relevant programmes get shorter by 50%. Thanks to the optimised washing steps, high mechanic activity and optimum water consumption, high washing performance is achieved in spite of the reduced duration.

•

Pet Hair Removal

This function helps to remove pet hair that remain on your garments more effectively. When you select this function, Prewash and Extra Rinse steps are added to the normal programme. Thus, washing is performed with more water and the pet hair is removed more effectively.

• Clean & Wear

When selected, it uses hot air at the end of the programme to make the garments ready to wear.

active. For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be canceled and Quick Wash will remain active.

An auxiliary function that is not compatible with the programme cannot be selected. (See, "Programme and consumption table")

Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The frame of the auxiliary function will not be illuminated, only inner area will be illuminated.

When this function is selected, the maximum load is 1 kg.

When this function is pressed once, the function selection will be active. When pressed for the second or third time, the time will decrease. If the load is less than 1 kg, the time can be decreased.

22 / EN

Washing Machine / User’s Manual

4.3.8.2 Functions/Programmes Selected by Pressing the Function Keys for 3 Seconds

• Drum Cleaning+

This programme is selected by pressing the 1st auxiliary function key for 3 seconds. Run this programme with the machine unloaded on a regular basis (once a month or every two months) to clean the drum. To obtain better results, put powder lime-scale remover for washing machines into the detergent compartment no. “2”. This programme contains a drying step that runs after the drum cleaning step to dry the inside of the machine.

This is not a washing programme. It is a maintenance programme.

• Child lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.

To activate the Child Lock:

Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as “CL 3-2-1" on the display is over, "CL On" symbol appears on the display. Release Auxiliary Function button 2 when this warning is displayed.

To deactivate the Child Lock:

Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as “CL 3-2-1" on the display is over, "CL Off" symbol disappears.

• AntiCrease+

This function is selected when the 4th auxiliary function is pressed and held for 3 seconds and the programme follow-up light for the relevant step turns on. When selected, it aerates the laundry for up to 8 hours at the end of the programme to prevent creasing. You can cancel the programme and take your laundry out at any time during the 8-hour duration. Press the function selection key or the machine on/off key to cancel the function. The programme follow-up light will remain on until the function is canceled or the step is complete. If the function cannot be cancelled, it will be active in the

subsequent washing cycles as well.

Opening the loading door in case of power failure:

Do not run the programme when there is something in the machine. If you try to do so, the machine detects that there is load inside and aborts the programme.

You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine again, programme will resume from where it has stopped.

When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be canceled if the buttons are pressed five times consecutively.

In case of power failure, you can use the loading door emergency handle under the pump filter cap to open the loading

Washing Machine / User’s Manual

door manually.

WARNING: To avoid any water overflow before opening the loading door, make sure there is no water left inside the

machine.

23 / EN

+ 53 hidden pages

Beko WMP 10744 XA User manual [EN,FR]

Specifications and Main Features

Frequently Asked Questions

User Manual